linux-arm-msm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH v4 0/6] BHI/BHIe improvements for MHI power purposes
@ 2021-05-06 19:32 Bhaumik Bhatt
  2021-05-06 19:32 ` [PATCH v4 1/6] bus: mhi: core: Set BHI/BHIe offsets on power up preparation Bhaumik Bhatt
                   ` (5 more replies)
  0 siblings, 6 replies; 9+ messages in thread
From: Bhaumik Bhatt @ 2021-05-06 19:32 UTC (permalink / raw)
  To: manivannan.sadhasivam
  Cc: linux-arm-msm, hemantk, jhugo, linux-kernel, loic.poulain,
	linux-wireless, kvalo, ath11k, Bhaumik Bhatt

This patch series improves the power up behavior by allowing MHI host driver to
set BHI and/or BHIe offsets early on in the preparation phase and fail pre-power
up if offsets are not found or not within a limited MMIO region. This also
allows MHI host to clean up the offsets in the unprepare after power down phase.

Going forward, controllers will be required to specify a reg_len field which
will be used to check whether the BHI/BHIe offsets are in range or not.

This series has been tested on X86_64 architecture with the PCI generic driver
as controller and an SDX55 device.

v4:
-Added reviewed-by tags
-Updated range check patch to include BHI/e offsets in the error message

v3:
-Added reviewed-by tags
-Updated order of reg_len in mhi_controller structure documentation

v2:
-Added reviewed-by tags
-Moved reg_len entry in mhi_controller structure to allow for a packed struct

Bhaumik Bhatt (6):
  bus: mhi: core: Set BHI/BHIe offsets on power up preparation
  bus: mhi: core: Set BHI and BHIe pointers to NULL in clean-up
  bus: mhi: Add MMIO region length to controller structure
  ath11k: set register access length for MHI driver
  bus: mhi: pci_generic: Set register access length for MHI driver
  bus: mhi: core: Add range checks for BHI and BHIe

 drivers/bus/mhi/core/init.c           | 61 ++++++++++++++++++++++++-----------
 drivers/bus/mhi/core/pm.c             | 28 +++-------------
 drivers/bus/mhi/pci_generic.c         |  1 +
 drivers/net/wireless/ath/ath11k/mhi.c |  1 +
 include/linux/mhi.h                   |  2 ++
 5 files changed, 50 insertions(+), 43 deletions(-)

-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project


^ permalink raw reply	[flat|nested] 9+ messages in thread

* [PATCH v4 1/6] bus: mhi: core: Set BHI/BHIe offsets on power up preparation
  2021-05-06 19:32 [PATCH v4 0/6] BHI/BHIe improvements for MHI power purposes Bhaumik Bhatt
@ 2021-05-06 19:32 ` Bhaumik Bhatt
  2021-05-06 19:32 ` [PATCH v4 2/6] bus: mhi: core: Set BHI and BHIe pointers to NULL in clean-up Bhaumik Bhatt
                   ` (4 subsequent siblings)
  5 siblings, 0 replies; 9+ messages in thread
From: Bhaumik Bhatt @ 2021-05-06 19:32 UTC (permalink / raw)
  To: manivannan.sadhasivam
  Cc: linux-arm-msm, hemantk, jhugo, linux-kernel, loic.poulain,
	linux-wireless, kvalo, ath11k, Bhaumik Bhatt

From: Bhaumik Bhatt <bbhatt@codeaurora.org>

Set the BHI and/or BHIe offsets in mhi_prepare_for_power_up(),
rearrange the function, and remove the equivalent from
mhi_async_power_up(). This helps consolidate multiple checks
in different parts of the driver and can help MHI fail early on
before power up begins if the offsets are not read correctly.

Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Hemant Kumar <hemantk@codeaurora.org>
---
 drivers/bus/mhi/core/init.c | 42 +++++++++++++++++++++++-------------------
 drivers/bus/mhi/core/pm.c   | 28 ++++------------------------
 2 files changed, 27 insertions(+), 43 deletions(-)

diff --git a/drivers/bus/mhi/core/init.c b/drivers/bus/mhi/core/init.c
index c81b377..11c7a3d 100644
--- a/drivers/bus/mhi/core/init.c
+++ b/drivers/bus/mhi/core/init.c
@@ -1063,7 +1063,7 @@ EXPORT_SYMBOL_GPL(mhi_free_controller);
 int mhi_prepare_for_power_up(struct mhi_controller *mhi_cntrl)
 {
 	struct device *dev = &mhi_cntrl->mhi_dev->dev;
-	u32 bhie_off;
+	u32 bhi_off, bhie_off;
 	int ret;
 
 	mutex_lock(&mhi_cntrl->pm_mutex);
@@ -1072,29 +1072,36 @@ int mhi_prepare_for_power_up(struct mhi_controller *mhi_cntrl)
 	if (ret)
 		goto error_dev_ctxt;
 
-	/*
-	 * Allocate RDDM table if specified, this table is for debugging purpose
-	 */
-	if (mhi_cntrl->rddm_size) {
-		mhi_alloc_bhie_table(mhi_cntrl, &mhi_cntrl->rddm_image,
-				     mhi_cntrl->rddm_size);
+	ret = mhi_read_reg(mhi_cntrl, mhi_cntrl->regs, BHIOFF, &bhi_off);
+	if (ret) {
+		dev_err(dev, "Error getting BHI offset\n");
+		goto error_reg_offset;
+	}
+	mhi_cntrl->bhi = mhi_cntrl->regs + bhi_off;
 
-		/*
-		 * This controller supports RDDM, so we need to manually clear
-		 * BHIE RX registers since POR values are undefined.
-		 */
+	if (mhi_cntrl->fbc_download || mhi_cntrl->rddm_size) {
 		ret = mhi_read_reg(mhi_cntrl, mhi_cntrl->regs, BHIEOFF,
 				   &bhie_off);
 		if (ret) {
 			dev_err(dev, "Error getting BHIE offset\n");
-			goto bhie_error;
+			goto error_reg_offset;
 		}
-
 		mhi_cntrl->bhie = mhi_cntrl->regs + bhie_off;
+	}
+
+	if (mhi_cntrl->rddm_size) {
+		/*
+		 * This controller supports RDDM, so we need to manually clear
+		 * BHIE RX registers since POR values are undefined.
+		 */
 		memset_io(mhi_cntrl->bhie + BHIE_RXVECADDR_LOW_OFFS,
 			  0, BHIE_RXVECSTATUS_OFFS - BHIE_RXVECADDR_LOW_OFFS +
 			  4);
-
+		/*
+		 * Allocate RDDM table for debugging purpose if specified
+		 */
+		mhi_alloc_bhie_table(mhi_cntrl, &mhi_cntrl->rddm_image,
+				     mhi_cntrl->rddm_size);
 		if (mhi_cntrl->rddm_image)
 			mhi_rddm_prepare(mhi_cntrl, mhi_cntrl->rddm_image);
 	}
@@ -1103,11 +1110,8 @@ int mhi_prepare_for_power_up(struct mhi_controller *mhi_cntrl)
 
 	return 0;
 
-bhie_error:
-	if (mhi_cntrl->rddm_image) {
-		mhi_free_bhie_table(mhi_cntrl, mhi_cntrl->rddm_image);
-		mhi_cntrl->rddm_image = NULL;
-	}
+error_reg_offset:
+	mhi_deinit_dev_ctxt(mhi_cntrl);
 
 error_dev_ctxt:
 	mutex_unlock(&mhi_cntrl->pm_mutex);
diff --git a/drivers/bus/mhi/core/pm.c b/drivers/bus/mhi/core/pm.c
index e2e59a3..adf426c 100644
--- a/drivers/bus/mhi/core/pm.c
+++ b/drivers/bus/mhi/core/pm.c
@@ -1066,28 +1066,8 @@ int mhi_async_power_up(struct mhi_controller *mhi_cntrl)
 	if (ret)
 		goto error_setup_irq;
 
-	/* Setup BHI offset & INTVEC */
+	/* Setup BHI INTVEC */
 	write_lock_irq(&mhi_cntrl->pm_lock);
-	ret = mhi_read_reg(mhi_cntrl, mhi_cntrl->regs, BHIOFF, &val);
-	if (ret) {
-		write_unlock_irq(&mhi_cntrl->pm_lock);
-		goto error_bhi_offset;
-	}
-
-	mhi_cntrl->bhi = mhi_cntrl->regs + val;
-
-	/* Setup BHIE offset */
-	if (mhi_cntrl->fbc_download) {
-		ret = mhi_read_reg(mhi_cntrl, mhi_cntrl->regs, BHIEOFF, &val);
-		if (ret) {
-			write_unlock_irq(&mhi_cntrl->pm_lock);
-			dev_err(dev, "Error reading BHIE offset\n");
-			goto error_bhi_offset;
-		}
-
-		mhi_cntrl->bhie = mhi_cntrl->regs + val;
-	}
-
 	mhi_write_reg(mhi_cntrl, mhi_cntrl->bhi, BHI_INTVEC, 0);
 	mhi_cntrl->pm_state = MHI_PM_POR;
 	mhi_cntrl->ee = MHI_EE_MAX;
@@ -1098,7 +1078,7 @@ int mhi_async_power_up(struct mhi_controller *mhi_cntrl)
 	if (!MHI_IN_PBL(current_ee) && current_ee != MHI_EE_AMSS) {
 		dev_err(dev, "Not a valid EE for power on\n");
 		ret = -EIO;
-		goto error_bhi_offset;
+		goto error_async_power_up;
 	}
 
 	state = mhi_get_mhi_state(mhi_cntrl);
@@ -1117,7 +1097,7 @@ int mhi_async_power_up(struct mhi_controller *mhi_cntrl)
 		if (!ret) {
 			ret = -EIO;
 			dev_info(dev, "Failed to reset MHI due to syserr state\n");
-			goto error_bhi_offset;
+			goto error_async_power_up;
 		}
 
 		/*
@@ -1139,7 +1119,7 @@ int mhi_async_power_up(struct mhi_controller *mhi_cntrl)
 
 	return 0;
 
-error_bhi_offset:
+error_async_power_up:
 	mhi_deinit_free_irq(mhi_cntrl);
 
 error_setup_irq:
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project


^ permalink raw reply	[flat|nested] 9+ messages in thread

* [PATCH v4 2/6] bus: mhi: core: Set BHI and BHIe pointers to NULL in clean-up
  2021-05-06 19:32 [PATCH v4 0/6] BHI/BHIe improvements for MHI power purposes Bhaumik Bhatt
  2021-05-06 19:32 ` [PATCH v4 1/6] bus: mhi: core: Set BHI/BHIe offsets on power up preparation Bhaumik Bhatt
@ 2021-05-06 19:32 ` Bhaumik Bhatt
  2021-05-06 19:32 ` [PATCH v4 3/6] bus: mhi: Add MMIO region length to controller structure Bhaumik Bhatt
                   ` (3 subsequent siblings)
  5 siblings, 0 replies; 9+ messages in thread
From: Bhaumik Bhatt @ 2021-05-06 19:32 UTC (permalink / raw)
  To: manivannan.sadhasivam
  Cc: linux-arm-msm, hemantk, jhugo, linux-kernel, loic.poulain,
	linux-wireless, kvalo, ath11k, Bhaumik Bhatt

From: Bhaumik Bhatt <bbhatt@codeaurora.org>

Set the BHI and BHIe pointers to NULL as part of clean-up. This
makes sure that stale pointers are not accessed after powering
MHI down.

Suggested-by: Hemant Kumar <hemantk@codeaurora.org>
Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Hemant Kumar <hemantk@codeaurora.org>
---
 drivers/bus/mhi/core/init.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/bus/mhi/core/init.c b/drivers/bus/mhi/core/init.c
index 11c7a3d..1cc2f22 100644
--- a/drivers/bus/mhi/core/init.c
+++ b/drivers/bus/mhi/core/init.c
@@ -1132,6 +1132,9 @@ void mhi_unprepare_after_power_down(struct mhi_controller *mhi_cntrl)
 		mhi_cntrl->rddm_image = NULL;
 	}
 
+	mhi_cntrl->bhi = NULL;
+	mhi_cntrl->bhie = NULL;
+
 	mhi_deinit_dev_ctxt(mhi_cntrl);
 }
 EXPORT_SYMBOL_GPL(mhi_unprepare_after_power_down);
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project


^ permalink raw reply	[flat|nested] 9+ messages in thread

* [PATCH v4 3/6] bus: mhi: Add MMIO region length to controller structure
  2021-05-06 19:32 [PATCH v4 0/6] BHI/BHIe improvements for MHI power purposes Bhaumik Bhatt
  2021-05-06 19:32 ` [PATCH v4 1/6] bus: mhi: core: Set BHI/BHIe offsets on power up preparation Bhaumik Bhatt
  2021-05-06 19:32 ` [PATCH v4 2/6] bus: mhi: core: Set BHI and BHIe pointers to NULL in clean-up Bhaumik Bhatt
@ 2021-05-06 19:32 ` Bhaumik Bhatt
  2021-05-06 19:32 ` [PATCH v4 4/6] ath11k: set register access length for MHI driver Bhaumik Bhatt
                   ` (2 subsequent siblings)
  5 siblings, 0 replies; 9+ messages in thread
From: Bhaumik Bhatt @ 2021-05-06 19:32 UTC (permalink / raw)
  To: manivannan.sadhasivam
  Cc: linux-arm-msm, hemantk, jhugo, linux-kernel, loic.poulain,
	linux-wireless, kvalo, ath11k, Bhaumik Bhatt

From: Bhaumik Bhatt <bbhatt@codeaurora.org>

Make controller driver specify the MMIO register region length
for range checking of BHI or BHIe space. This can help validate
that offsets are in acceptable memory region or not and avoid any
boot-up issues due to BHI or BHIe memory accesses.

Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Hemant Kumar <hemantk@codeaurora.org>
---
 include/linux/mhi.h | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/include/linux/mhi.h b/include/linux/mhi.h
index 944aa3a..9c347f5 100644
--- a/include/linux/mhi.h
+++ b/include/linux/mhi.h
@@ -303,6 +303,7 @@ struct mhi_controller_config {
  * @rddm_size: RAM dump size that host should allocate for debugging purpose
  * @sbl_size: SBL image size downloaded through BHIe (optional)
  * @seg_len: BHIe vector size (optional)
+ * @reg_len: Length of the MHI MMIO region (required)
  * @fbc_image: Points to firmware image buffer
  * @rddm_image: Points to RAM dump buffer
  * @mhi_chan: Points to the channel configuration table
@@ -386,6 +387,7 @@ struct mhi_controller {
 	size_t rddm_size;
 	size_t sbl_size;
 	size_t seg_len;
+	size_t reg_len;
 	struct image_info *fbc_image;
 	struct image_info *rddm_image;
 	struct mhi_chan *mhi_chan;
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project


^ permalink raw reply	[flat|nested] 9+ messages in thread

* [PATCH v4 4/6] ath11k: set register access length for MHI driver
  2021-05-06 19:32 [PATCH v4 0/6] BHI/BHIe improvements for MHI power purposes Bhaumik Bhatt
                   ` (2 preceding siblings ...)
  2021-05-06 19:32 ` [PATCH v4 3/6] bus: mhi: Add MMIO region length to controller structure Bhaumik Bhatt
@ 2021-05-06 19:32 ` Bhaumik Bhatt
  2021-05-06 19:32 ` [PATCH v4 5/6] bus: mhi: pci_generic: Set " Bhaumik Bhatt
  2021-05-06 19:32 ` [PATCH v4 6/6] bus: mhi: core: Add range checks for BHI and BHIe Bhaumik Bhatt
  5 siblings, 0 replies; 9+ messages in thread
From: Bhaumik Bhatt @ 2021-05-06 19:32 UTC (permalink / raw)
  To: manivannan.sadhasivam
  Cc: linux-arm-msm, hemantk, jhugo, linux-kernel, loic.poulain,
	linux-wireless, kvalo, ath11k, Bhaumik Bhatt

From: Bhaumik Bhatt <bbhatt@codeaurora.org>

MHI driver requires register space length to add range checks and
prevent memory region accesses outside of that for MMIO space.
Set it before registering the MHI controller.

Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
Reviewed-by: Hemant Kumar <hemantk@codeaurora.org>
---
 drivers/net/wireless/ath/ath11k/mhi.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/wireless/ath/ath11k/mhi.c b/drivers/net/wireless/ath/ath11k/mhi.c
index 09858e5..c0f013c 100644
--- a/drivers/net/wireless/ath/ath11k/mhi.c
+++ b/drivers/net/wireless/ath/ath11k/mhi.c
@@ -235,6 +235,7 @@ int ath11k_mhi_register(struct ath11k_pci *ab_pci)
 	mhi_ctrl->cntrl_dev = ab->dev;
 	mhi_ctrl->fw_image = ab_pci->amss_path;
 	mhi_ctrl->regs = ab->mem;
+	mhi_ctrl->reg_len = ab->mem_len;
 
 	ret = ath11k_mhi_get_msi(ab_pci);
 	if (ret) {
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project


^ permalink raw reply	[flat|nested] 9+ messages in thread

* [PATCH v4 5/6] bus: mhi: pci_generic: Set register access length for MHI driver
  2021-05-06 19:32 [PATCH v4 0/6] BHI/BHIe improvements for MHI power purposes Bhaumik Bhatt
                   ` (3 preceding siblings ...)
  2021-05-06 19:32 ` [PATCH v4 4/6] ath11k: set register access length for MHI driver Bhaumik Bhatt
@ 2021-05-06 19:32 ` Bhaumik Bhatt
  2021-05-06 19:32 ` [PATCH v4 6/6] bus: mhi: core: Add range checks for BHI and BHIe Bhaumik Bhatt
  5 siblings, 0 replies; 9+ messages in thread
From: Bhaumik Bhatt @ 2021-05-06 19:32 UTC (permalink / raw)
  To: manivannan.sadhasivam
  Cc: linux-arm-msm, hemantk, jhugo, linux-kernel, loic.poulain,
	linux-wireless, kvalo, ath11k, Bhaumik Bhatt

From: Bhaumik Bhatt <bbhatt@codeaurora.org>

MHI driver requires register space length to add range checks and
prevent memory region accesses outside of that for MMIO space.
Set it from the PCI generic controller driver before registering
the MHI controller.

Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
Reviewed-by: Hemant Kumar <hemantk@codeaurora.org>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
---
 drivers/bus/mhi/pci_generic.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/bus/mhi/pci_generic.c b/drivers/bus/mhi/pci_generic.c
index 7c810f0..fb7889f 100644
--- a/drivers/bus/mhi/pci_generic.c
+++ b/drivers/bus/mhi/pci_generic.c
@@ -463,6 +463,7 @@ static int mhi_pci_claim(struct mhi_controller *mhi_cntrl,
 		return err;
 	}
 	mhi_cntrl->regs = pcim_iomap_table(pdev)[bar_num];
+	mhi_cntrl->reg_len = pci_resource_len(pdev, bar_num);
 
 	err = pci_set_dma_mask(pdev, dma_mask);
 	if (err) {
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project


^ permalink raw reply	[flat|nested] 9+ messages in thread

* [PATCH v4 6/6] bus: mhi: core: Add range checks for BHI and BHIe
  2021-05-06 19:32 [PATCH v4 0/6] BHI/BHIe improvements for MHI power purposes Bhaumik Bhatt
                   ` (4 preceding siblings ...)
  2021-05-06 19:32 ` [PATCH v4 5/6] bus: mhi: pci_generic: Set " Bhaumik Bhatt
@ 2021-05-06 19:32 ` Bhaumik Bhatt
  5 siblings, 0 replies; 9+ messages in thread
From: Bhaumik Bhatt @ 2021-05-06 19:32 UTC (permalink / raw)
  To: manivannan.sadhasivam
  Cc: linux-arm-msm, hemantk, jhugo, linux-kernel, loic.poulain,
	linux-wireless, kvalo, ath11k, Bhaumik Bhatt

From: Bhaumik Bhatt <bbhatt@codeaurora.org>

When obtaining the BHI or BHIe offsets during the power up
preparation phase, range checks are missing. These can help
controller drivers avoid accessing any address outside of the
MMIO region. Ensure that mhi_cntrl->reg_len is set before MHI
registration as it is a required field and range checks will
fail without it.

Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
---
 drivers/bus/mhi/core/init.c | 18 +++++++++++++++++-
 1 file changed, 17 insertions(+), 1 deletion(-)

diff --git a/drivers/bus/mhi/core/init.c b/drivers/bus/mhi/core/init.c
index 1cc2f22..aeb1e3c 100644
--- a/drivers/bus/mhi/core/init.c
+++ b/drivers/bus/mhi/core/init.c
@@ -885,7 +885,8 @@ int mhi_register_controller(struct mhi_controller *mhi_cntrl,
 	if (!mhi_cntrl || !mhi_cntrl->cntrl_dev || !mhi_cntrl->regs ||
 	    !mhi_cntrl->runtime_get || !mhi_cntrl->runtime_put ||
 	    !mhi_cntrl->status_cb || !mhi_cntrl->read_reg ||
-	    !mhi_cntrl->write_reg || !mhi_cntrl->nr_irqs || !mhi_cntrl->irq)
+	    !mhi_cntrl->write_reg || !mhi_cntrl->nr_irqs ||
+	    !mhi_cntrl->irq || !mhi_cntrl->reg_len)
 		return -EINVAL;
 
 	ret = parse_config(mhi_cntrl, config);
@@ -1077,6 +1078,13 @@ int mhi_prepare_for_power_up(struct mhi_controller *mhi_cntrl)
 		dev_err(dev, "Error getting BHI offset\n");
 		goto error_reg_offset;
 	}
+
+	if (bhi_off >= mhi_cntrl->reg_len) {
+		dev_err(dev, "BHI offset: 0x%x is out of range: 0x%zx\n",
+			bhi_off, mhi_cntrl->reg_len);
+		ret = -EINVAL;
+		goto error_reg_offset;
+	}
 	mhi_cntrl->bhi = mhi_cntrl->regs + bhi_off;
 
 	if (mhi_cntrl->fbc_download || mhi_cntrl->rddm_size) {
@@ -1086,6 +1094,14 @@ int mhi_prepare_for_power_up(struct mhi_controller *mhi_cntrl)
 			dev_err(dev, "Error getting BHIE offset\n");
 			goto error_reg_offset;
 		}
+
+		if (bhie_off >= mhi_cntrl->reg_len) {
+			dev_err(dev,
+				"BHIe offset: 0x%x is out of range: 0x%zx\n",
+				bhie_off, mhi_cntrl->reg_len);
+			ret = -EINVAL;
+			goto error_reg_offset;
+		}
 		mhi_cntrl->bhie = mhi_cntrl->regs + bhie_off;
 	}
 
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project


^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: [PATCH v4 2/6] bus: mhi: core: Set BHI and BHIe pointers to NULL in clean-up
  2021-05-06 19:51 ` [PATCH v4 2/6] bus: mhi: core: Set BHI and BHIe pointers to NULL in clean-up Bhaumik Bhatt
@ 2021-05-21 13:37   ` Manivannan Sadhasivam
  0 siblings, 0 replies; 9+ messages in thread
From: Manivannan Sadhasivam @ 2021-05-21 13:37 UTC (permalink / raw)
  To: Bhaumik Bhatt
  Cc: linux-arm-msm, hemantk, jhugo, linux-kernel, loic.poulain,
	linux-wireless, kvalo, ath11k

On Thu, May 06, 2021 at 12:51:41PM -0700, Bhaumik Bhatt wrote:
> Set the BHI and BHIe pointers to NULL as part of clean-up. This
> makes sure that stale pointers are not accessed after powering
> MHI down.
> 
> Suggested-by: Hemant Kumar <hemantk@codeaurora.org>
> Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
> Reviewed-by: Hemant Kumar <hemantk@codeaurora.org>

Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

Thanks,
Mani

> ---
>  drivers/bus/mhi/core/init.c | 3 +++
>  1 file changed, 3 insertions(+)
> 
> diff --git a/drivers/bus/mhi/core/init.c b/drivers/bus/mhi/core/init.c
> index 11c7a3d..1cc2f22 100644
> --- a/drivers/bus/mhi/core/init.c
> +++ b/drivers/bus/mhi/core/init.c
> @@ -1132,6 +1132,9 @@ void mhi_unprepare_after_power_down(struct mhi_controller *mhi_cntrl)
>  		mhi_cntrl->rddm_image = NULL;
>  	}
>  
> +	mhi_cntrl->bhi = NULL;
> +	mhi_cntrl->bhie = NULL;
> +
>  	mhi_deinit_dev_ctxt(mhi_cntrl);
>  }
>  EXPORT_SYMBOL_GPL(mhi_unprepare_after_power_down);
> -- 
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project
> 

^ permalink raw reply	[flat|nested] 9+ messages in thread

* [PATCH v4 2/6] bus: mhi: core: Set BHI and BHIe pointers to NULL in clean-up
  2021-05-06 19:51 [PATCH v4 0/6] BHI/BHIe improvements for MHI power purposes Bhaumik Bhatt
@ 2021-05-06 19:51 ` Bhaumik Bhatt
  2021-05-21 13:37   ` Manivannan Sadhasivam
  0 siblings, 1 reply; 9+ messages in thread
From: Bhaumik Bhatt @ 2021-05-06 19:51 UTC (permalink / raw)
  To: manivannan.sadhasivam
  Cc: linux-arm-msm, hemantk, jhugo, linux-kernel, loic.poulain,
	linux-wireless, kvalo, ath11k, Bhaumik Bhatt

Set the BHI and BHIe pointers to NULL as part of clean-up. This
makes sure that stale pointers are not accessed after powering
MHI down.

Suggested-by: Hemant Kumar <hemantk@codeaurora.org>
Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Hemant Kumar <hemantk@codeaurora.org>
---
 drivers/bus/mhi/core/init.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/bus/mhi/core/init.c b/drivers/bus/mhi/core/init.c
index 11c7a3d..1cc2f22 100644
--- a/drivers/bus/mhi/core/init.c
+++ b/drivers/bus/mhi/core/init.c
@@ -1132,6 +1132,9 @@ void mhi_unprepare_after_power_down(struct mhi_controller *mhi_cntrl)
 		mhi_cntrl->rddm_image = NULL;
 	}
 
+	mhi_cntrl->bhi = NULL;
+	mhi_cntrl->bhie = NULL;
+
 	mhi_deinit_dev_ctxt(mhi_cntrl);
 }
 EXPORT_SYMBOL_GPL(mhi_unprepare_after_power_down);
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project


^ permalink raw reply	[flat|nested] 9+ messages in thread

end of thread, other threads:[~2021-05-21 13:38 UTC | newest]

Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-05-06 19:32 [PATCH v4 0/6] BHI/BHIe improvements for MHI power purposes Bhaumik Bhatt
2021-05-06 19:32 ` [PATCH v4 1/6] bus: mhi: core: Set BHI/BHIe offsets on power up preparation Bhaumik Bhatt
2021-05-06 19:32 ` [PATCH v4 2/6] bus: mhi: core: Set BHI and BHIe pointers to NULL in clean-up Bhaumik Bhatt
2021-05-06 19:32 ` [PATCH v4 3/6] bus: mhi: Add MMIO region length to controller structure Bhaumik Bhatt
2021-05-06 19:32 ` [PATCH v4 4/6] ath11k: set register access length for MHI driver Bhaumik Bhatt
2021-05-06 19:32 ` [PATCH v4 5/6] bus: mhi: pci_generic: Set " Bhaumik Bhatt
2021-05-06 19:32 ` [PATCH v4 6/6] bus: mhi: core: Add range checks for BHI and BHIe Bhaumik Bhatt
2021-05-06 19:51 [PATCH v4 0/6] BHI/BHIe improvements for MHI power purposes Bhaumik Bhatt
2021-05-06 19:51 ` [PATCH v4 2/6] bus: mhi: core: Set BHI and BHIe pointers to NULL in clean-up Bhaumik Bhatt
2021-05-21 13:37   ` Manivannan Sadhasivam

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).