From: satya priya <skakit@codeaurora.org>
To: Dmitry Torokhov <dmitry.torokhov@gmail.com>,
Rob Herring <robh+dt@kernel.org>,
Sebastian Reichel <sre@kernel.org>,
Andy Gross <agross@kernel.org>,
Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: David Collins <collinsd@codeaurora.org>,
kgunda@codeaurora.org, linux-input@vger.kernel.org,
linux-pm@vger.kernel.org, linux-kernel@vger.kernel.org,
devicetree@vger.kernel.org, linux-arm-msm@vger.kernel.org,
Courtney Cavin <courtney.cavin@sonymobile.com>,
Vinod Koul <vkoul@kernel.org>, Andy Yan <andy.yan@rock-chips.com>,
satya priya <skakit@codeaurora.org>
Subject: [PATCH V3 5/5] dt-bindings: power: reset: qcom-pon: Convert qcom PON binding to yaml
Date: Mon, 10 May 2021 12:31:04 +0530 [thread overview]
Message-ID: <1620630064-16354-6-git-send-email-skakit@codeaurora.org> (raw)
In-Reply-To: <1620630064-16354-1-git-send-email-skakit@codeaurora.org>
Convert qcom PON binding from .txt to .yaml format.
The example has been removed in favour of full example being
available in the qcom,pm8941-pwrkey binding.
Signed-off-by: satya priya <skakit@codeaurora.org>
---
Changes in V2:
- As per Rob's comments, converted the main PON binding and added in V2.
Changes in V3:
- As per Sebastian's comments, added allOf to refer reboot-mode.yaml and
used unevaluatedProperties = false. Added maxItems for reg.
.../devicetree/bindings/power/reset/qcom,pon.txt | 49 ----------------------
.../devicetree/bindings/power/reset/qcom,pon.yaml | 44 +++++++++++++++++++
2 files changed, 44 insertions(+), 49 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/power/reset/qcom,pon.txt
create mode 100644 Documentation/devicetree/bindings/power/reset/qcom,pon.yaml
diff --git a/Documentation/devicetree/bindings/power/reset/qcom,pon.txt b/Documentation/devicetree/bindings/power/reset/qcom,pon.txt
deleted file mode 100644
index 0c0dc3a..0000000
--- a/Documentation/devicetree/bindings/power/reset/qcom,pon.txt
+++ /dev/null
@@ -1,49 +0,0 @@
-Qualcomm PON Device
-
-The Power On device for Qualcomm PM8xxx is MFD supporting pwrkey
-and resin along with the Android reboot-mode.
-
-This DT node has pwrkey and resin as sub nodes.
-
-Required Properties:
--compatible: Must be one of:
- "qcom,pm8916-pon"
- "qcom,pms405-pon"
- "qcom,pm8998-pon"
-
--reg: Specifies the physical address of the pon register
-
-Optional subnode:
--pwrkey: Specifies the subnode pwrkey and should follow the
- qcom,pm8941-pwrkey.txt description.
--resin: Specifies the subnode resin and should follow the
- qcom,pm8xxx-pwrkey.txt description.
-
-The rest of the properties should follow the generic reboot-mode description
-found in reboot-mode.txt
-
-Example:
-
- pon@800 {
- compatible = "qcom,pm8916-pon";
-
- reg = <0x800>;
- mode-bootloader = <0x2>;
- mode-recovery = <0x1>;
-
- pwrkey {
- compatible = "qcom,pm8941-pwrkey";
- interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
- debounce = <15625>;
- bias-pull-up;
- linux,code = <KEY_POWER>;
- };
-
- resin {
- compatible = "qcom,pm8941-resin";
- interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
- debounce = <15625>;
- bias-pull-up;
- linux,code = <KEY_VOLUMEDOWN>;
- };
- };
diff --git a/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml b/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml
new file mode 100644
index 0000000..439f082
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/reset/qcom,pon.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm PON Device
+
+maintainers:
+ - Vinod Koul <vkoul@kernel.org>
+
+description: |
+ The Power On device for Qualcomm PM8xxx is MFD supporting pwrkey
+ and resin along with the Android reboot-mode.
+
+ This DT node has pwrkey and resin as sub nodes.
+
+allOf:
+ - $ref: reboot-mode.yaml#
+
+properties:
+ compatible:
+ enum:
+ - qcom,pm8916-pon
+ - qcom,pms405-pon
+ - qcom,pm8998-pon
+
+ reg:
+ maxItems: 1
+
+ pwrkey:
+ type: object
+ $ref: "../../input/qcom,pm8941-pwrkey.yaml#"
+
+ resin:
+ type: object
+ $ref: "../../input/qcom,pm8941-pwrkey.yaml#"
+
+required:
+ - compatible
+ - reg
+
+unevaluatedProperties: false
+...
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation
next prev parent reply other threads:[~2021-05-10 7:02 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-10 7:00 [PATCH V3 0/5] Add support for PMK8350 PON_HLOS PMIC peripheral satya priya
2021-05-10 7:01 ` [PATCH V3 1/5] input: pm8941-pwrkey: add " satya priya
2021-06-02 4:36 ` Dmitry Torokhov
2021-05-10 7:01 ` [PATCH V3 2/5] dt-bindings: input: pm8941-pwrkey: add pmk8350 compatible strings satya priya
2021-06-02 4:36 ` Dmitry Torokhov
2021-05-10 7:01 ` [PATCH V3 3/5] dt-bindings: power: reset: Change 'additionalProperties' to true satya priya
2021-05-10 16:20 ` Rob Herring
2021-06-04 11:08 ` Sebastian Reichel
2021-05-10 7:01 ` [PATCH V3 4/5] dt-bindings: input: pm8941-pwrkey: Convert pm8941 power key binding to yaml satya priya
2021-05-10 14:01 ` Rob Herring
2021-05-10 16:24 ` Rob Herring
2021-05-12 4:47 ` skakit
2021-06-02 4:37 ` Dmitry Torokhov
2021-06-02 10:31 ` skakit
2021-05-10 7:01 ` satya priya [this message]
2021-05-10 16:25 ` [PATCH V3 5/5] dt-bindings: power: reset: qcom-pon: Convert qcom PON " Rob Herring
2021-06-04 11:09 ` Sebastian Reichel
2021-06-04 11:42 ` skakit
2021-06-04 11:45 ` skakit
2021-06-04 11:58 ` Sebastian Reichel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1620630064-16354-6-git-send-email-skakit@codeaurora.org \
--to=skakit@codeaurora.org \
--cc=agross@kernel.org \
--cc=andy.yan@rock-chips.com \
--cc=bjorn.andersson@linaro.org \
--cc=collinsd@codeaurora.org \
--cc=courtney.cavin@sonymobile.com \
--cc=devicetree@vger.kernel.org \
--cc=dmitry.torokhov@gmail.com \
--cc=kgunda@codeaurora.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=sre@kernel.org \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).