[V2 0/3] Add L3 provider support for SC7280

[V2 0/3] Add L3 provider support for SC7280

[Odelu Kukatla]

Add Epoch Subsystem (EPSS) L3 provider support on SM7280 SoCs.

v2:
 - Addressed review comments (Georgi/Sibi)
 
Depends on: https://lore.kernel.org/patchwork/cover/1418814/
 
Odelu Kukatla (3):
  dt-bindings: interconnect: Add EPSS L3 DT binding on SC7280
  interconnect: qcom: Add EPSS L3 support on SC7280
  arm64: dts: qcom: sc7280: Add EPSS L3 interconnect provider

 .../bindings/interconnect/qcom,osm-l3.yaml         |   3 +-
 arch/arm64/boot/dts/qcom/sc7280.dtsi               |   9 ++
 drivers/interconnect/qcom/osm-l3.c                 | 135 ++++++++++++++++-----
 drivers/interconnect/qcom/sc7280.h                 |  10 ++
 include/dt-bindings/interconnect/qcom,osm-l3.h     |  10 +-
 5 files changed, 136 insertions(+), 31 deletions(-)

-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

[V2 1/3] dt-bindings: interconnect: Add EPSS L3 DT binding on SC7280

[Odelu Kukatla]

Add Epoch Subsystem (EPSS) L3 interconnect provider binding on SC7280
SoCs.

Signed-off-by: Odelu Kukatla <okukatla@codeaurora.org>
---
 .../devicetree/bindings/interconnect/qcom,osm-l3.yaml          |  3 ++-
 include/dt-bindings/interconnect/qcom,osm-l3.h                 | 10 +++++++++-
 2 files changed, 11 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/interconnect/qcom,osm-l3.yaml b/Documentation/devicetree/bindings/interconnect/qcom,osm-l3.yaml
index d6a95c3..aa76949 100644
--- a/Documentation/devicetree/bindings/interconnect/qcom,osm-l3.yaml
+++ b/Documentation/devicetree/bindings/interconnect/qcom,osm-l3.yaml
@@ -18,12 +18,13 @@ properties:
   compatible:
     enum:
       - qcom,sc7180-osm-l3
+      - qcom,sc7280-epss-l3
       - qcom,sdm845-osm-l3
       - qcom,sm8150-osm-l3
       - qcom,sm8250-epss-l3
 
   reg:
-    maxItems: 1
+    maxItems: 4
 
   clocks:
     items:
diff --git a/include/dt-bindings/interconnect/qcom,osm-l3.h b/include/dt-bindings/interconnect/qcom,osm-l3.h
index 61ef649..99534a5 100644
--- a/include/dt-bindings/interconnect/qcom,osm-l3.h
+++ b/include/dt-bindings/interconnect/qcom,osm-l3.h
@@ -1,6 +1,6 @@
 /* SPDX-License-Identifier: GPL-2.0 */
 /*
- * Copyright (C) 2019 The Linux Foundation. All rights reserved.
+ * Copyright (C) 2019, 2021 The Linux Foundation. All rights reserved.
  */
 
 #ifndef __DT_BINDINGS_INTERCONNECT_QCOM_OSM_L3_H
@@ -11,5 +11,13 @@
 
 #define MASTER_EPSS_L3_APPS	0
 #define SLAVE_EPSS_L3_SHARED	1
+#define SLAVE_EPSS_L3_CPU0	2
+#define SLAVE_EPSS_L3_CPU1	3
+#define SLAVE_EPSS_L3_CPU2	4
+#define SLAVE_EPSS_L3_CPU3	5
+#define SLAVE_EPSS_L3_CPU4	6
+#define SLAVE_EPSS_L3_CPU5	7
+#define SLAVE_EPSS_L3_CPU6	8
+#define SLAVE_EPSS_L3_CPU7	9
 
 #endif
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

Re: [V2 1/3] dt-bindings: interconnect: Add EPSS L3 DT binding on SC7280

[Rob Herring]

On Tue, 18 May 2021 23:04:00 +0530, Odelu Kukatla wrote:
> Add Epoch Subsystem (EPSS) L3 interconnect provider binding on SC7280
> SoCs.
> 
> Signed-off-by: Odelu Kukatla <okukatla@codeaurora.org>
> ---
>  .../devicetree/bindings/interconnect/qcom,osm-l3.yaml          |  3 ++-
>  include/dt-bindings/interconnect/qcom,osm-l3.h                 | 10 +++++++++-
>  2 files changed, 11 insertions(+), 2 deletions(-)
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/interconnect/qcom,osm-l3.example.dt.yaml: interconnect@17d41000: reg: [[399773696, 5120]] is too short
	From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/interconnect/qcom,osm-l3.yaml

See https://patchwork.ozlabs.org/patch/1480367

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.

Re: [V2 1/3] dt-bindings: interconnect: Add EPSS L3 DT binding on SC7280

[okukatla]

On 2021-05-19 08:18, Rob Herring wrote:
> On Tue, 18 May 2021 23:04:00 +0530, Odelu Kukatla wrote:
>> Add Epoch Subsystem (EPSS) L3 interconnect provider binding on SC7280
>> SoCs.
>> 
>> Signed-off-by: Odelu Kukatla <okukatla@codeaurora.org>
>> ---
>>  .../devicetree/bindings/interconnect/qcom,osm-l3.yaml          |  3 
>> ++-
>>  include/dt-bindings/interconnect/qcom,osm-l3.h                 | 10 
>> +++++++++-
>>  2 files changed, 11 insertions(+), 2 deletions(-)
>> 
> 
> My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
> on your patch (DT_CHECKER_FLAGS is new in v5.13):
> 
> yamllint warnings/errors:
> 
> dtschema/dtc warnings/errors:
> /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/interconnect/qcom,osm-l3.example.dt.yaml:
> interconnect@17d41000: reg: [[399773696, 5120]] is too short
> 	From schema:
> /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/interconnect/qcom,osm-l3.yaml
> 
> See https://patchwork.ozlabs.org/patch/1480367
> 
> This check can fail if there are any dependencies. The base for a patch
> series is generally the most recent rc1.
> 
> If you already ran 'make dt_binding_check' and didn't see the above
> error(s), then make sure 'yamllint' is installed and dt-schema is up to
> date:
> 
> pip3 install dtschema --upgrade
> 
> Please check and re-submit.
Thanks Rob!.
I will address this in next revision.

[V2 2/3] interconnect: qcom: Add EPSS L3 support on SC7280

[Odelu Kukatla]

Add Epoch Subsystem (EPSS) L3 interconnect provider support on
SC7280 SoCs.

Signed-off-by: Odelu Kukatla <okukatla@codeaurora.org>
---
 drivers/interconnect/qcom/osm-l3.c | 135 +++++++++++++++++++++++++++++--------
 drivers/interconnect/qcom/sc7280.h |  10 +++
 2 files changed, 116 insertions(+), 29 deletions(-)

diff --git a/drivers/interconnect/qcom/osm-l3.c b/drivers/interconnect/qcom/osm-l3.c
index 695f287..a8c0ee8 100644
--- a/drivers/interconnect/qcom/osm-l3.c
+++ b/drivers/interconnect/qcom/osm-l3.c
@@ -15,6 +15,7 @@
 #include <dt-bindings/interconnect/qcom,osm-l3.h>
 
 #include "sc7180.h"
+#include "sc7280.h"
 #include "sdm845.h"
 #include "sm8150.h"
 #include "sm8250.h"
@@ -32,17 +33,33 @@
 
 /* EPSS Register offsets */
 #define EPSS_LUT_ROW_SIZE		4
+#define EPSS_REG_L3_VOTE		0x90
 #define EPSS_REG_FREQ_LUT		0x100
 #define EPSS_REG_PERF_STATE		0x320
+#define EPSS_CORE_OFFSET		0x4
+#define EPSS_L3_VOTE_REG(base, cpu)\
+			(((base) + EPSS_REG_L3_VOTE) +\
+			((cpu) * EPSS_CORE_OFFSET))
 
-#define OSM_L3_MAX_LINKS		1
+#define L3_DOMAIN_CNT		4
+#define L3_MAX_LINKS		9
 
 #define to_qcom_provider(_provider) \
 	container_of(_provider, struct qcom_osm_l3_icc_provider, provider)
 
+/**
+ * @domain_base: an array of base address for each clock domain
+ * @max_state: max supported frequency level
+ * @per_core_dcvs: flag used to indicate whether the frequency scaling
+ * for each core is enabled
+ * @reg_perf_state: requested frequency level
+ * @lut_tables: an array of supported frequency levels
+ * @provider: interconnect provider of this node
+ */
 struct qcom_osm_l3_icc_provider {
-	void __iomem *base;
+	void __iomem *domain_base[L3_DOMAIN_CNT];
 	unsigned int max_state;
+	bool per_core_dcvs;
 	unsigned int reg_perf_state;
 	unsigned long lut_tables[LUT_MAX_ENTRIES];
 	struct icc_provider provider;
@@ -55,34 +72,41 @@ struct qcom_osm_l3_icc_provider {
  * @id: a unique node identifier
  * @num_links: the total number of @links
  * @buswidth: width of the interconnect between a node and the bus
+ * @domain: clock domain of the cpu node
+ * @cpu: cpu instance within its clock domain
  */
 struct qcom_icc_node {
 	const char *name;
-	u16 links[OSM_L3_MAX_LINKS];
+	u16 links[L3_MAX_LINKS];
 	u16 id;
 	u16 num_links;
 	u16 buswidth;
+	u16 domain;
+	int cpu;
 };
 
 struct qcom_icc_desc {
 	const struct qcom_icc_node **nodes;
 	size_t num_nodes;
+	bool per_core_dcvs;
 	unsigned int lut_row_size;
 	unsigned int reg_freq_lut;
 	unsigned int reg_perf_state;
 };
 
-#define DEFINE_QNODE(_name, _id, _buswidth, ...)			\
-	static const struct qcom_icc_node _name = {			\
-		.name = #_name,						\
-		.id = _id,						\
-		.buswidth = _buswidth,					\
-		.num_links = ARRAY_SIZE(((int[]){ __VA_ARGS__ })),	\
-		.links = { __VA_ARGS__ },				\
+#define DEFINE_QNODE(_name, _id, _buswidth, _domain, _cpu, ...)			\
+	static const struct qcom_icc_node _name = {				\
+		.name = #_name,							\
+		.id = _id,							\
+		.buswidth = _buswidth,						\
+		.domain = _domain,						\
+		.cpu = _cpu,						\
+		.num_links = ARRAY_SIZE(((int[]){ __VA_ARGS__ })),		\
+		.links = { __VA_ARGS__ },					\
 	}
 
-DEFINE_QNODE(sdm845_osm_apps_l3, SDM845_MASTER_OSM_L3_APPS, 16, SDM845_SLAVE_OSM_L3);
-DEFINE_QNODE(sdm845_osm_l3, SDM845_SLAVE_OSM_L3, 16);
+DEFINE_QNODE(sdm845_osm_apps_l3, SDM845_MASTER_OSM_L3_APPS, 16, 0, 0, SDM845_SLAVE_OSM_L3);
+DEFINE_QNODE(sdm845_osm_l3, SDM845_SLAVE_OSM_L3, 16, 0, 0);
 
 static const struct qcom_icc_node *sdm845_osm_l3_nodes[] = {
 	[MASTER_OSM_L3_APPS] = &sdm845_osm_apps_l3,
@@ -97,8 +121,8 @@ static const struct qcom_icc_desc sdm845_icc_osm_l3 = {
 	.reg_perf_state = OSM_REG_PERF_STATE,
 };
 
-DEFINE_QNODE(sc7180_osm_apps_l3, SC7180_MASTER_OSM_L3_APPS, 16, SC7180_SLAVE_OSM_L3);
-DEFINE_QNODE(sc7180_osm_l3, SC7180_SLAVE_OSM_L3, 16);
+DEFINE_QNODE(sc7180_osm_apps_l3, SC7180_MASTER_OSM_L3_APPS, 16, 0, 0, SC7180_SLAVE_OSM_L3);
+DEFINE_QNODE(sc7180_osm_l3, SC7180_SLAVE_OSM_L3, 16, 0, 0);
 
 static const struct qcom_icc_node *sc7180_osm_l3_nodes[] = {
 	[MASTER_OSM_L3_APPS] = &sc7180_osm_apps_l3,
@@ -113,8 +137,8 @@ static const struct qcom_icc_desc sc7180_icc_osm_l3 = {
 	.reg_perf_state = OSM_REG_PERF_STATE,
 };
 
-DEFINE_QNODE(sm8150_osm_apps_l3, SM8150_MASTER_OSM_L3_APPS, 32, SM8150_SLAVE_OSM_L3);
-DEFINE_QNODE(sm8150_osm_l3, SM8150_SLAVE_OSM_L3, 32);
+DEFINE_QNODE(sm8150_osm_apps_l3, SM8150_MASTER_OSM_L3_APPS, 32, 0, 0, SM8150_SLAVE_OSM_L3);
+DEFINE_QNODE(sm8150_osm_l3, SM8150_SLAVE_OSM_L3, 32, 0, 0);
 
 static const struct qcom_icc_node *sm8150_osm_l3_nodes[] = {
 	[MASTER_OSM_L3_APPS] = &sm8150_osm_apps_l3,
@@ -129,8 +153,8 @@ static const struct qcom_icc_desc sm8150_icc_osm_l3 = {
 	.reg_perf_state = OSM_REG_PERF_STATE,
 };
 
-DEFINE_QNODE(sm8250_epss_apps_l3, SM8250_MASTER_EPSS_L3_APPS, 32, SM8250_SLAVE_EPSS_L3);
-DEFINE_QNODE(sm8250_epss_l3, SM8250_SLAVE_EPSS_L3, 32);
+DEFINE_QNODE(sm8250_epss_apps_l3, SM8250_MASTER_EPSS_L3_APPS, 32, 0, 0, SM8250_SLAVE_EPSS_L3);
+DEFINE_QNODE(sm8250_epss_l3, SM8250_SLAVE_EPSS_L3, 32, 0, 0);
 
 static const struct qcom_icc_node *sm8250_epss_l3_nodes[] = {
 	[MASTER_EPSS_L3_APPS] = &sm8250_epss_apps_l3,
@@ -145,6 +169,39 @@ static const struct qcom_icc_desc sm8250_icc_epss_l3 = {
 	.reg_perf_state = EPSS_REG_PERF_STATE,
 };
 
+DEFINE_QNODE(sc7280_epss_apps_l3, SC7280_MASTER_EPSS_L3_APPS, 32, 0, 0, SC7280_SLAVE_EPSS_L3_SHARED, SC7280_SLAVE_EPSS_L3_CPU0, SC7280_SLAVE_EPSS_L3_CPU1, SC7280_SLAVE_EPSS_L3_CPU2, SC7280_SLAVE_EPSS_L3_CPU3, SC7280_SLAVE_EPSS_L3_CPU4, SC7280_SLAVE_EPSS_L3_CPU5, SC7280_SLAVE_EPSS_L3_CPU6, SC7280_SLAVE_EPSS_L3_CPU7);
+DEFINE_QNODE(sc7280_epss_l3_shared, SC7280_SLAVE_EPSS_L3_SHARED, 32, 0, 0);
+DEFINE_QNODE(sc7280_epss_l3_cpu0, SC7280_SLAVE_EPSS_L3_CPU0, 32, 1, 0);
+DEFINE_QNODE(sc7280_epss_l3_cpu1, SC7280_SLAVE_EPSS_L3_CPU1, 32, 1, 1);
+DEFINE_QNODE(sc7280_epss_l3_cpu2, SC7280_SLAVE_EPSS_L3_CPU2, 32, 1, 2);
+DEFINE_QNODE(sc7280_epss_l3_cpu3, SC7280_SLAVE_EPSS_L3_CPU3, 32, 1, 3);
+DEFINE_QNODE(sc7280_epss_l3_cpu4, SC7280_SLAVE_EPSS_L3_CPU4, 32, 2, 0);
+DEFINE_QNODE(sc7280_epss_l3_cpu5, SC7280_SLAVE_EPSS_L3_CPU5, 32, 2, 1);
+DEFINE_QNODE(sc7280_epss_l3_cpu6, SC7280_SLAVE_EPSS_L3_CPU6, 32, 2, 2);
+DEFINE_QNODE(sc7280_epss_l3_cpu7, SC7280_SLAVE_EPSS_L3_CPU7, 32, 3, 0);
+
+static const struct qcom_icc_node *sc7280_epss_l3_nodes[] = {
+	[MASTER_EPSS_L3_APPS] = &sc7280_epss_apps_l3,
+	[SLAVE_EPSS_L3_SHARED] = &sc7280_epss_l3_shared,
+	[SLAVE_EPSS_L3_CPU0] = &sc7280_epss_l3_cpu0,
+	[SLAVE_EPSS_L3_CPU1] = &sc7280_epss_l3_cpu1,
+	[SLAVE_EPSS_L3_CPU2] = &sc7280_epss_l3_cpu2,
+	[SLAVE_EPSS_L3_CPU3] = &sc7280_epss_l3_cpu3,
+	[SLAVE_EPSS_L3_CPU4] = &sc7280_epss_l3_cpu4,
+	[SLAVE_EPSS_L3_CPU5] = &sc7280_epss_l3_cpu5,
+	[SLAVE_EPSS_L3_CPU6] = &sc7280_epss_l3_cpu6,
+	[SLAVE_EPSS_L3_CPU7] = &sc7280_epss_l3_cpu7,
+};
+
+static const struct qcom_icc_desc sc7280_icc_epss_l3 = {
+	.nodes = sc7280_epss_l3_nodes,
+	.num_nodes = ARRAY_SIZE(sc7280_epss_l3_nodes),
+	.per_core_dcvs = true,
+	.lut_row_size = EPSS_LUT_ROW_SIZE,
+	.reg_freq_lut = EPSS_REG_FREQ_LUT,
+	.reg_perf_state = EPSS_REG_PERF_STATE,
+};
+
 static int qcom_icc_set(struct icc_node *src, struct icc_node *dst)
 {
 	struct qcom_osm_l3_icc_provider *qp;
@@ -156,13 +213,18 @@ static int qcom_icc_set(struct icc_node *src, struct icc_node *dst)
 	u32 agg_avg = 0;
 	u64 rate;
 
-	qn = src->data;
+	qn = dst->data;
 	provider = src->provider;
 	qp = to_qcom_provider(provider);
 
-	list_for_each_entry(n, &provider->nodes, node_list)
-		provider->aggregate(n, 0, n->avg_bw, n->peak_bw,
-				    &agg_avg, &agg_peak);
+	/* Skip aggregation when per core l3 scaling is enabled */
+	if (qp->per_core_dcvs) {
+		agg_peak = dst->peak_bw;
+	} else {
+		list_for_each_entry(n, &provider->nodes, node_list)
+			provider->aggregate(n, 0, n->avg_bw, n->peak_bw,
+						&agg_avg, &agg_peak);
+	}
 
 	rate = max(agg_avg, agg_peak);
 	rate = icc_units_to_bps(rate);
@@ -173,7 +235,10 @@ static int qcom_icc_set(struct icc_node *src, struct icc_node *dst)
 			break;
 	}
 
-	writel_relaxed(index, qp->base + qp->reg_perf_state);
+	if (qp->per_core_dcvs)
+		writel_relaxed(index, EPSS_L3_VOTE_REG(qp->domain_base[qn->domain], qn->cpu));
+	else
+		writel_relaxed(index, qp->domain_base[qn->domain] + qp->reg_perf_state);
 
 	return 0;
 }
@@ -194,11 +259,12 @@ static int qcom_osm_l3_probe(struct platform_device *pdev)
 	const struct qcom_icc_desc *desc;
 	struct icc_onecell_data *data;
 	struct icc_provider *provider;
+	struct property *prop;
 	const struct qcom_icc_node **qnodes;
 	struct icc_node *node;
 	size_t num_nodes;
 	struct clk *clk;
-	int ret;
+	int ret, index, domain_count;
 
 	clk = clk_get(&pdev->dev, "xo");
 	if (IS_ERR(clk))
@@ -218,12 +284,21 @@ static int qcom_osm_l3_probe(struct platform_device *pdev)
 	if (!qp)
 		return -ENOMEM;
 
-	qp->base = devm_platform_ioremap_resource(pdev, 0);
-	if (IS_ERR(qp->base))
-		return PTR_ERR(qp->base);
+	prop = of_find_property(pdev->dev.of_node, "reg", NULL);
+	if (!prop)
+		return -EINVAL;
+	domain_count = prop->length / (4 * sizeof(prop->length));
+	if (!domain_count)
+		return -EINVAL;
+
+	for (index = 0; index < domain_count ; index++) {
+		qp->domain_base[index] = devm_platform_ioremap_resource(pdev, index);
+		if (IS_ERR(qp->domain_base[index]))
+			return PTR_ERR(qp->domain_base[index]);
+	}
 
 	/* HW should be in enabled state to proceed */
-	if (!(readl_relaxed(qp->base + REG_ENABLE) & 0x1)) {
+	if (!(readl_relaxed(qp->domain_base[0] + REG_ENABLE) & 0x1)) {
 		dev_err(&pdev->dev, "error hardware not enabled\n");
 		return -ENODEV;
 	}
@@ -235,7 +310,7 @@ static int qcom_osm_l3_probe(struct platform_device *pdev)
 	qp->reg_perf_state = desc->reg_perf_state;
 
 	for (i = 0; i < LUT_MAX_ENTRIES; i++) {
-		info = readl_relaxed(qp->base + desc->reg_freq_lut +
+		info = readl_relaxed(qp->domain_base[0] + desc->reg_freq_lut +
 				     i * desc->lut_row_size);
 		src = FIELD_GET(LUT_SRC, info);
 		lval = FIELD_GET(LUT_L_VAL, info);
@@ -254,6 +329,7 @@ static int qcom_osm_l3_probe(struct platform_device *pdev)
 		prev_freq = freq;
 	}
 	qp->max_state = i;
+	qp->per_core_dcvs = desc->per_core_dcvs;
 
 	qnodes = desc->nodes;
 	num_nodes = desc->num_nodes;
@@ -309,6 +385,7 @@ static int qcom_osm_l3_probe(struct platform_device *pdev)
 
 static const struct of_device_id osm_l3_of_match[] = {
 	{ .compatible = "qcom,sc7180-osm-l3", .data = &sc7180_icc_osm_l3 },
+	{ .compatible = "qcom,sc7280-epss-l3", .data = &sc7280_icc_epss_l3 },
 	{ .compatible = "qcom,sdm845-osm-l3", .data = &sdm845_icc_osm_l3 },
 	{ .compatible = "qcom,sm8150-osm-l3", .data = &sm8150_icc_osm_l3 },
 	{ .compatible = "qcom,sm8250-epss-l3", .data = &sm8250_icc_epss_l3 },
diff --git a/drivers/interconnect/qcom/sc7280.h b/drivers/interconnect/qcom/sc7280.h
index 175e400..5df7600 100644
--- a/drivers/interconnect/qcom/sc7280.h
+++ b/drivers/interconnect/qcom/sc7280.h
@@ -150,5 +150,15 @@
 #define SC7280_SLAVE_PCIE_1			139
 #define SC7280_SLAVE_QDSS_STM			140
 #define SC7280_SLAVE_TCU			141
+#define SC7280_MASTER_EPSS_L3_APPS			142
+#define SC7280_SLAVE_EPSS_L3_SHARED			143
+#define SC7280_SLAVE_EPSS_L3_CPU0			144
+#define SC7280_SLAVE_EPSS_L3_CPU1			145
+#define SC7280_SLAVE_EPSS_L3_CPU2			146
+#define SC7280_SLAVE_EPSS_L3_CPU3			147
+#define SC7280_SLAVE_EPSS_L3_CPU4			148
+#define SC7280_SLAVE_EPSS_L3_CPU5			149
+#define SC7280_SLAVE_EPSS_L3_CPU6			150
+#define SC7280_SLAVE_EPSS_L3_CPU7			151
 
 #endif
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

[V2 3/3] arm64: dts: qcom: sc7280: Add EPSS L3 interconnect provider

[Odelu Kukatla]

Add Epoch Subsystem (EPSS) L3 interconnect provider node on SC7280
SoCs.

Signed-off-by: Odelu Kukatla <okukatla@codeaurora.org>
---
 arch/arm64/boot/dts/qcom/sc7280.dtsi | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index 6b22021..5aec586 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -1122,6 +1122,15 @@
 			};
 		};
 
+		epss_l3: interconnect@18590000 {
+			compatible = "qcom,sc7280-epss-l3";
+			reg = <0 0x18590000 0 1000>, <0 0x18591000 0 0x100>,
+				<0 0x18592000 0 0x100>, <0 0x18593000 0 0x100>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>;
+			clock-names = "xo", "alternate";
+			#interconnect-cells = <1>;
+		};
+
 		clk_virt: interconnect {
 			compatible = "qcom,sc7280-clk-virt";
 			#interconnect-cells = <2>;
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project