From: Wesley Cheng <wcheng@codeaurora.org>
To: balbi@kernel.org, gregkh@linuxfoundation.org, agross@kernel.org,
bjorn.andersson@linaro.org, robh+dt@kernel.org
Cc: linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
jackp@codeaurora.org, Thinh.Nguyen@synopsys.com,
Wesley Cheng <wcheng@codeaurora.org>
Subject: [PATCH v9 1/5] usb: gadget: udc: core: Introduce check_config to verify USB configuration
Date: Wed, 19 May 2021 00:49:17 -0700 [thread overview]
Message-ID: <1621410561-32762-2-git-send-email-wcheng@codeaurora.org> (raw)
In-Reply-To: <1621410561-32762-1-git-send-email-wcheng@codeaurora.org>
Some UDCs may have constraints on how many high bandwidth endpoints it can
support in a certain configuration. This API allows for the composite
driver to pass down the total number of endpoints to the UDC so it can verify
it has the required resources to support the configuration.
Signed-off-by: Wesley Cheng <wcheng@codeaurora.org>
---
drivers/usb/gadget/udc/core.c | 25 +++++++++++++++++++++++++
include/linux/usb/gadget.h | 5 +++++
2 files changed, 30 insertions(+)
diff --git a/drivers/usb/gadget/udc/core.c b/drivers/usb/gadget/udc/core.c
index 493ff93..e67fd93 100644
--- a/drivers/usb/gadget/udc/core.c
+++ b/drivers/usb/gadget/udc/core.c
@@ -1003,6 +1003,31 @@ int usb_gadget_ep_match_desc(struct usb_gadget *gadget,
}
EXPORT_SYMBOL_GPL(usb_gadget_ep_match_desc);
+/**
+ * usb_gadget_check_config - checks if the UDC can support the number of eps
+ * @gadget: controller to check the USB configuration
+ * @ep_map: bitmap of endpoints being requested by a USB configuration
+ *
+ * Ensure that a UDC is able to support the number of endpoints within a USB
+ * configuration, and that there are no resource limitations to support all
+ * requested eps.
+ *
+ * Returns zero on success, else a negative errno.
+ */
+int usb_gadget_check_config(struct usb_gadget *gadget, unsigned long ep_map)
+{
+ int ret = 0;
+
+ if (!gadget->ops->check_config)
+ goto out;
+
+ ret = gadget->ops->check_config(gadget, ep_map);
+
+out:
+ return ret;
+}
+EXPORT_SYMBOL_GPL(usb_gadget_check_config);
+
/* ------------------------------------------------------------------------- */
static void usb_gadget_state_work(struct work_struct *work)
diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h
index ee04ef2..9fb69eb 100644
--- a/include/linux/usb/gadget.h
+++ b/include/linux/usb/gadget.h
@@ -328,6 +328,7 @@ struct usb_gadget_ops {
struct usb_ep *(*match_ep)(struct usb_gadget *,
struct usb_endpoint_descriptor *,
struct usb_ss_ep_comp_descriptor *);
+ int (*check_config)(struct usb_gadget *gadget, unsigned long ep_map);
};
/**
@@ -607,6 +608,7 @@ int usb_gadget_connect(struct usb_gadget *gadget);
int usb_gadget_disconnect(struct usb_gadget *gadget);
int usb_gadget_deactivate(struct usb_gadget *gadget);
int usb_gadget_activate(struct usb_gadget *gadget);
+int usb_gadget_check_config(struct usb_gadget *gadget, unsigned long ep_map);
#else
static inline int usb_gadget_frame_number(struct usb_gadget *gadget)
{ return 0; }
@@ -630,6 +632,9 @@ static inline int usb_gadget_deactivate(struct usb_gadget *gadget)
{ return 0; }
static inline int usb_gadget_activate(struct usb_gadget *gadget)
{ return 0; }
+static inline int usb_gadget_check_config(struct usb_gadget *gadget,
+ unsigned long ep_map)
+{ return 0; }
#endif /* CONFIG_USB_GADGET */
/*-------------------------------------------------------------------------*/
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
next prev parent reply other threads:[~2021-05-19 7:49 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-19 7:49 [PATCH v9 0/5] Re-introduce TX FIFO resize for larger EP bursting Wesley Cheng
2021-05-19 7:49 ` Wesley Cheng [this message]
2021-05-19 7:49 ` [PATCH v9 2/5] usb: gadget: configfs: Check USB configuration before adding Wesley Cheng
2021-05-19 7:49 ` [PATCH v9 3/5] usb: dwc3: Resize TX FIFOs to meet EP bursting requirements Wesley Cheng
2021-05-19 7:49 ` [PATCH v9 4/5] usb: dwc3: dwc3-qcom: Enable tx-fifo-resize property by default Wesley Cheng
2021-05-19 7:49 ` [PATCH v9 5/5] dt-bindings: usb: dwc3: Update dwc3 TX fifo properties Wesley Cheng
2021-06-04 11:54 ` [PATCH v9 0/5] Re-introduce TX FIFO resize for larger EP bursting Greg KH
2021-06-04 14:18 ` Felipe Balbi
2021-06-04 14:36 ` Greg KH
2021-06-08 5:44 ` Wesley Cheng
2021-06-10 9:20 ` Felipe Balbi
2021-06-10 10:03 ` Greg KH
2021-06-10 10:16 ` Felipe Balbi
2021-06-10 18:15 ` Wesley Cheng
2021-06-11 6:29 ` Felipe Balbi
2021-06-11 8:43 ` Wesley Cheng
2021-06-11 13:00 ` Felipe Balbi
2021-06-11 13:14 ` Heikki Krogerus
2021-06-11 13:21 ` Andy Shevchenko
2021-06-12 21:27 ` Ferry Toth
2021-06-12 21:37 ` Andy Shevchenko
2021-06-14 18:58 ` Wesley Cheng
2021-06-14 19:30 ` Ferry Toth
2021-06-15 4:22 ` Wesley Cheng
2021-06-15 19:53 ` Ferry Toth
2021-06-17 4:25 ` Wesley Cheng
[not found] ` <fe834dbf-786a-2996-5c4b-1eac92e3ed18@gmail.com>
2021-06-17 8:30 ` Wesley Cheng
2021-06-17 19:54 ` Ferry Toth
2021-07-01 1:08 ` Wesley Cheng
2021-06-07 16:04 ` Jack Pham
2021-06-08 5:07 ` Wesley Cheng
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1621410561-32762-2-git-send-email-wcheng@codeaurora.org \
--to=wcheng@codeaurora.org \
--cc=Thinh.Nguyen@synopsys.com \
--cc=agross@kernel.org \
--cc=balbi@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=jackp@codeaurora.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).