* [PATCH v3] Add support for duty-cycle for RCG
@ 2021-04-25 7:08 Taniya Das
2021-04-25 7:08 ` [PATCH v3] clk: qcom: clk-rcg2: " Taniya Das
2021-04-28 0:19 ` [PATCH v3] " Stephen Boyd
0 siblings, 2 replies; 6+ messages in thread
From: Taniya Das @ 2021-04-25 7:08 UTC (permalink / raw)
To: Stephen Boyd, Michael Turquette
Cc: Rajendra Nayak, linux-arm-msm, linux-soc, linux-clk,
linux-kernel, Taniya Das
The root clock generators with MND divider has the capability to support
change in duty-cycle by updating the 'D'. Add the clock ops which would
check all the boundary conditions and enable setting the desired duty-cycle
as per the consumer.
[v3]
* Implement clockops for get_duty_cycle.
* Return -EINVAL for Non-MND or HID RCGs.
Taniya Das (1):
clk: qcom: clk-rcg2: Add support for duty-cycle for RCG
drivers/clk/qcom/clk-rcg2.c | 81 +++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 81 insertions(+)
--
Qualcomm INDIA, on behalf of Qualcomm Innovation Center, Inc.is a member
of the Code Aurora Forum, hosted by the Linux Foundation.
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH v3] clk: qcom: clk-rcg2: Add support for duty-cycle for RCG
2021-04-25 7:08 [PATCH v3] Add support for duty-cycle for RCG Taniya Das
@ 2021-04-25 7:08 ` Taniya Das
2021-05-26 3:36 ` Stephen Boyd
2021-04-28 0:19 ` [PATCH v3] " Stephen Boyd
1 sibling, 1 reply; 6+ messages in thread
From: Taniya Das @ 2021-04-25 7:08 UTC (permalink / raw)
To: Stephen Boyd, Michael Turquette
Cc: Rajendra Nayak, linux-arm-msm, linux-soc, linux-clk,
linux-kernel, Taniya Das
The root clock generators with MND divider has the capability to support
change in duty-cycle by updating the 'D'. Add the clock ops which would
check all the boundary conditions and enable setting the desired duty-cycle
as per the consumer.
Signed-off-by: Taniya Das <tdas@codeaurora.org>
---
drivers/clk/qcom/clk-rcg2.c | 81 +++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 81 insertions(+)
diff --git a/drivers/clk/qcom/clk-rcg2.c b/drivers/clk/qcom/clk-rcg2.c
index 05ff3b0..aa03e31 100644
--- a/drivers/clk/qcom/clk-rcg2.c
+++ b/drivers/clk/qcom/clk-rcg2.c
@@ -357,6 +357,83 @@ static int clk_rcg2_set_floor_rate_and_parent(struct clk_hw *hw,
return __clk_rcg2_set_rate(hw, rate, FLOOR);
}
+static int clk_rcg2_get_duty_cycle(struct clk_hw *hw, struct clk_duty *duty)
+{
+ struct clk_rcg2 *rcg = to_clk_rcg2(hw);
+ u32 notn_m_val, n_val, m_val, d_val, not2d_val, mask;
+
+ if (!rcg->mnd_width) {
+ /* 50 % duty-cycle for Non-MND RCGs */
+ duty->num = 1;
+ duty->den = 2;
+ return 0;
+ }
+
+ regmap_read(rcg->clkr.regmap, RCG_D_OFFSET(rcg), ¬2d_val);
+ regmap_read(rcg->clkr.regmap, RCG_M_OFFSET(rcg), &m_val);
+ regmap_read(rcg->clkr.regmap, RCG_N_OFFSET(rcg), ¬n_m_val);
+
+ if (!not2d_val && !m_val && !notn_m_val) {
+ /* 50 % duty-cycle always */
+ duty->num = 1;
+ duty->den = 2;
+ return 0;
+ }
+
+ mask = BIT(rcg->mnd_width) - 1;
+
+ d_val = ~(not2d_val) & mask;
+ d_val = DIV_ROUND_CLOSEST(d_val, 2);
+
+ n_val = (~(notn_m_val) + m_val) & mask;
+
+ duty->num = d_val;
+ duty->den = n_val;
+
+ return 0;
+}
+
+static int clk_rcg2_set_duty_cycle(struct clk_hw *hw, struct clk_duty *duty)
+{
+ struct clk_rcg2 *rcg = to_clk_rcg2(hw);
+ u32 notn_m_val, n_val, m_val, d_val, not2d_val, mask, duty_per;
+ int ret;
+
+ /* Duty-cycle cannot be modified for non-MND RCGs */
+ if (!rcg->mnd_width)
+ return -EINVAL;
+
+ mask = BIT(rcg->mnd_width) - 1;
+
+ regmap_read(rcg->clkr.regmap, RCG_N_OFFSET(rcg), ¬n_m_val);
+ regmap_read(rcg->clkr.regmap, RCG_M_OFFSET(rcg), &m_val);
+
+ n_val = (~(notn_m_val) + m_val) & mask;
+
+ duty_per = (duty->num * 100) / duty->den;
+
+ /* Calculate 2d value */
+ d_val = DIV_ROUND_CLOSEST(n_val * duty_per * 2, 100);
+
+ /* Check bit widths of 2d. If D is too big reduce duty cycle. */
+ if (d_val > mask)
+ d_val = mask;
+
+ if ((d_val / 2) > (n_val - m_val))
+ d_val = (n_val - m_val) * 2;
+ else if ((d_val / 2) < (m_val / 2))
+ d_val = m_val;
+
+ not2d_val = ~d_val & mask;
+
+ ret = regmap_update_bits(rcg->clkr.regmap, RCG_D_OFFSET(rcg), mask,
+ not2d_val);
+ if (ret)
+ return ret;
+
+ return update_config(rcg);
+}
+
const struct clk_ops clk_rcg2_ops = {
.is_enabled = clk_rcg2_is_enabled,
.get_parent = clk_rcg2_get_parent,
@@ -365,6 +442,8 @@ const struct clk_ops clk_rcg2_ops = {
.determine_rate = clk_rcg2_determine_rate,
.set_rate = clk_rcg2_set_rate,
.set_rate_and_parent = clk_rcg2_set_rate_and_parent,
+ .get_duty_cycle = clk_rcg2_get_duty_cycle,
+ .set_duty_cycle = clk_rcg2_set_duty_cycle,
};
EXPORT_SYMBOL_GPL(clk_rcg2_ops);
@@ -376,6 +455,8 @@ const struct clk_ops clk_rcg2_floor_ops = {
.determine_rate = clk_rcg2_determine_floor_rate,
.set_rate = clk_rcg2_set_floor_rate,
.set_rate_and_parent = clk_rcg2_set_floor_rate_and_parent,
+ .get_duty_cycle = clk_rcg2_get_duty_cycle,
+ .set_duty_cycle = clk_rcg2_set_duty_cycle,
};
EXPORT_SYMBOL_GPL(clk_rcg2_floor_ops);
--
Qualcomm INDIA, on behalf of Qualcomm Innovation Center, Inc.is a member
of the Code Aurora Forum, hosted by the Linux Foundation.
^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH v3] Add support for duty-cycle for RCG
2021-04-25 7:08 [PATCH v3] Add support for duty-cycle for RCG Taniya Das
2021-04-25 7:08 ` [PATCH v3] clk: qcom: clk-rcg2: " Taniya Das
@ 2021-04-28 0:19 ` Stephen Boyd
2021-04-29 6:55 ` Taniya Das
1 sibling, 1 reply; 6+ messages in thread
From: Stephen Boyd @ 2021-04-28 0:19 UTC (permalink / raw)
To: Michael Turquette, Taniya Das
Cc: Rajendra Nayak, linux-arm-msm, linux-soc, linux-clk,
linux-kernel, Taniya Das
Quoting Taniya Das (2021-04-25 00:08:21)
> The root clock generators with MND divider has the capability to support
> change in duty-cycle by updating the 'D'. Add the clock ops which would
> check all the boundary conditions and enable setting the desired duty-cycle
> as per the consumer.
>
> [v3]
> * Implement clockops for get_duty_cycle.
> * Return -EINVAL for Non-MND or HID RCGs.
We don't need cover letters for single patches. Please add these details
after the dash before the diffstat on the single patch.
>
> Taniya Das (1):
> clk: qcom: clk-rcg2: Add support for duty-cycle for RCG
>
> drivers/clk/qcom/clk-rcg2.c | 81 +++++++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 81 insertions(+)
>
> --
> Qualcomm INDIA, on behalf of Qualcomm Innovation Center, Inc.is a member
> of the Code Aurora Forum, hosted by the Linux Foundation.
>
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v3] Add support for duty-cycle for RCG
2021-04-28 0:19 ` [PATCH v3] " Stephen Boyd
@ 2021-04-29 6:55 ` Taniya Das
2021-04-30 2:21 ` Stephen Boyd
0 siblings, 1 reply; 6+ messages in thread
From: Taniya Das @ 2021-04-29 6:55 UTC (permalink / raw)
To: Stephen Boyd, Michael Turquette
Cc: Rajendra Nayak, linux-arm-msm, linux-soc, linux-clk, linux-kernel
Thank you for your review.
On 4/28/2021 5:49 AM, Stephen Boyd wrote:
> Quoting Taniya Das (2021-04-25 00:08:21)
>> The root clock generators with MND divider has the capability to support
>> change in duty-cycle by updating the 'D'. Add the clock ops which would
>> check all the boundary conditions and enable setting the desired duty-cycle
>> as per the consumer.
>>
>> [v3]
>> * Implement clockops for get_duty_cycle.
>> * Return -EINVAL for Non-MND or HID RCGs.
>
> We don't need cover letters for single patches. Please add these details
> after the dash before the diffstat on the single patch.
>
Sure Stephen, will take care from next time. Let me know in case I need
to re-submit the patch again.
>>
>> Taniya Das (1):
>> clk: qcom: clk-rcg2: Add support for duty-cycle for RCG
>>
>> drivers/clk/qcom/clk-rcg2.c | 81 +++++++++++++++++++++++++++++++++++++++++++++
>> 1 file changed, 81 insertions(+)
>>
>> --
>> Qualcomm INDIA, on behalf of Qualcomm Innovation Center, Inc.is a member
>> of the Code Aurora Forum, hosted by the Linux Foundation.
>>
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation.
--
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v3] Add support for duty-cycle for RCG
2021-04-29 6:55 ` Taniya Das
@ 2021-04-30 2:21 ` Stephen Boyd
0 siblings, 0 replies; 6+ messages in thread
From: Stephen Boyd @ 2021-04-30 2:21 UTC (permalink / raw)
To: Michael Turquette, Taniya Das
Cc: Rajendra Nayak, linux-arm-msm, linux-soc, linux-clk, linux-kernel
Quoting Taniya Das (2021-04-28 23:55:16)
> Thank you for your review.
>
> On 4/28/2021 5:49 AM, Stephen Boyd wrote:
> > Quoting Taniya Das (2021-04-25 00:08:21)
> >> The root clock generators with MND divider has the capability to support
> >> change in duty-cycle by updating the 'D'. Add the clock ops which would
> >> check all the boundary conditions and enable setting the desired duty-cycle
> >> as per the consumer.
> >>
> >> [v3]
> >> * Implement clockops for get_duty_cycle.
> >> * Return -EINVAL for Non-MND or HID RCGs.
> >
> > We don't need cover letters for single patches. Please add these details
> > after the dash before the diffstat on the single patch.
> >
>
> Sure Stephen, will take care from next time. Let me know in case I need
> to re-submit the patch again.
>
Don't think so. Merge window is open so I'll apply it in another week.
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v3] clk: qcom: clk-rcg2: Add support for duty-cycle for RCG
2021-04-25 7:08 ` [PATCH v3] clk: qcom: clk-rcg2: " Taniya Das
@ 2021-05-26 3:36 ` Stephen Boyd
0 siblings, 0 replies; 6+ messages in thread
From: Stephen Boyd @ 2021-05-26 3:36 UTC (permalink / raw)
To: Michael Turquette, Taniya Das
Cc: Rajendra Nayak, linux-arm-msm, linux-soc, linux-clk,
linux-kernel, Taniya Das
Quoting Taniya Das (2021-04-25 00:08:22)
> The root clock generators with MND divider has the capability to support
> change in duty-cycle by updating the 'D'. Add the clock ops which would
> check all the boundary conditions and enable setting the desired duty-cycle
> as per the consumer.
>
> Signed-off-by: Taniya Das <tdas@codeaurora.org>
> ---
Applied to clk-next with '_val' removed everywhere as it made it super
hard to read. I also don't like the (d / 2) stuff but I can live with
it.
---8<---
diff --git a/drivers/clk/qcom/clk-rcg2.c b/drivers/clk/qcom/clk-rcg2.c
index aa03e315d891..e1b1b426fae4 100644
--- a/drivers/clk/qcom/clk-rcg2.c
+++ b/drivers/clk/qcom/clk-rcg2.c
@@ -360,7 +360,7 @@ static int clk_rcg2_set_floor_rate_and_parent(struct clk_hw *hw,
static int clk_rcg2_get_duty_cycle(struct clk_hw *hw, struct clk_duty *duty)
{
struct clk_rcg2 *rcg = to_clk_rcg2(hw);
- u32 notn_m_val, n_val, m_val, d_val, not2d_val, mask;
+ u32 notn_m, n, m, d, not2d, mask;
if (!rcg->mnd_width) {
/* 50 % duty-cycle for Non-MND RCGs */
@@ -369,11 +369,11 @@ static int clk_rcg2_get_duty_cycle(struct clk_hw *hw, struct clk_duty *duty)
return 0;
}
- regmap_read(rcg->clkr.regmap, RCG_D_OFFSET(rcg), ¬2d_val);
- regmap_read(rcg->clkr.regmap, RCG_M_OFFSET(rcg), &m_val);
- regmap_read(rcg->clkr.regmap, RCG_N_OFFSET(rcg), ¬n_m_val);
+ regmap_read(rcg->clkr.regmap, RCG_D_OFFSET(rcg), ¬2d);
+ regmap_read(rcg->clkr.regmap, RCG_M_OFFSET(rcg), &m);
+ regmap_read(rcg->clkr.regmap, RCG_N_OFFSET(rcg), ¬n_m);
- if (!not2d_val && !m_val && !notn_m_val) {
+ if (!not2d && !m && !notn_m) {
/* 50 % duty-cycle always */
duty->num = 1;
duty->den = 2;
@@ -382,13 +382,13 @@ static int clk_rcg2_get_duty_cycle(struct clk_hw *hw, struct clk_duty *duty)
mask = BIT(rcg->mnd_width) - 1;
- d_val = ~(not2d_val) & mask;
- d_val = DIV_ROUND_CLOSEST(d_val, 2);
+ d = ~(not2d) & mask;
+ d = DIV_ROUND_CLOSEST(d, 2);
- n_val = (~(notn_m_val) + m_val) & mask;
+ n = (~(notn_m) + m) & mask;
- duty->num = d_val;
- duty->den = n_val;
+ duty->num = d;
+ duty->den = n;
return 0;
}
@@ -396,7 +396,7 @@ static int clk_rcg2_get_duty_cycle(struct clk_hw *hw, struct clk_duty *duty)
static int clk_rcg2_set_duty_cycle(struct clk_hw *hw, struct clk_duty *duty)
{
struct clk_rcg2 *rcg = to_clk_rcg2(hw);
- u32 notn_m_val, n_val, m_val, d_val, not2d_val, mask, duty_per;
+ u32 notn_m, n, m, d, not2d, mask, duty_per;
int ret;
/* Duty-cycle cannot be modified for non-MND RCGs */
@@ -405,29 +405,29 @@ static int clk_rcg2_set_duty_cycle(struct clk_hw *hw, struct clk_duty *duty)
mask = BIT(rcg->mnd_width) - 1;
- regmap_read(rcg->clkr.regmap, RCG_N_OFFSET(rcg), ¬n_m_val);
- regmap_read(rcg->clkr.regmap, RCG_M_OFFSET(rcg), &m_val);
+ regmap_read(rcg->clkr.regmap, RCG_N_OFFSET(rcg), ¬n_m);
+ regmap_read(rcg->clkr.regmap, RCG_M_OFFSET(rcg), &m);
- n_val = (~(notn_m_val) + m_val) & mask;
+ n = (~(notn_m) + m) & mask;
duty_per = (duty->num * 100) / duty->den;
/* Calculate 2d value */
- d_val = DIV_ROUND_CLOSEST(n_val * duty_per * 2, 100);
+ d = DIV_ROUND_CLOSEST(n * duty_per * 2, 100);
/* Check bit widths of 2d. If D is too big reduce duty cycle. */
- if (d_val > mask)
- d_val = mask;
+ if (d > mask)
+ d = mask;
- if ((d_val / 2) > (n_val - m_val))
- d_val = (n_val - m_val) * 2;
- else if ((d_val / 2) < (m_val / 2))
- d_val = m_val;
+ if ((d / 2) > (n - m))
+ d = (n - m) * 2;
+ else if ((d / 2) < (m / 2))
+ d = m;
- not2d_val = ~d_val & mask;
+ not2d = ~d & mask;
ret = regmap_update_bits(rcg->clkr.regmap, RCG_D_OFFSET(rcg), mask,
- not2d_val);
+ not2d);
if (ret)
return ret;
^ permalink raw reply related [flat|nested] 6+ messages in thread
end of thread, other threads:[~2021-05-26 3:36 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-04-25 7:08 [PATCH v3] Add support for duty-cycle for RCG Taniya Das
2021-04-25 7:08 ` [PATCH v3] clk: qcom: clk-rcg2: " Taniya Das
2021-05-26 3:36 ` Stephen Boyd
2021-04-28 0:19 ` [PATCH v3] " Stephen Boyd
2021-04-29 6:55 ` Taniya Das
2021-04-30 2:21 ` Stephen Boyd
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).