linux-arm-msm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Kuogee Hsieh <khsieh@codeaurora.org>
To: robdclark@gmail.com, sean@poorly.run, swboyd@chromium.org,
	vkoul@kernel.org, agross@kernel.org, bjorn.andersson@linaro.org
Cc: abhinavk@codeaurora.org, aravindh@codeaurora.org,
	khsieh@codeaurora.org, freedreno@lists.freedesktop.org,
	linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v5] drm/msm/dp: power off DP phy at suspend
Date: Thu,  3 Jun 2021 08:40:46 -0700	[thread overview]
Message-ID: <1622734846-14179-1-git-send-email-khsieh@codeaurora.org> (raw)

Normal DP suspend operation contains two steps, display off followed
by dp suspend, to complete system wide suspending cycle if display is
up at that time. In this case, DP phy will be powered off at display
off. However there is an exception case that depending on the timing
of dongle plug in during system wide suspending, sometimes display off
procedure may be skipped and dp suspend was called directly. In this
case, dp phy is stay at powered on (phy->power_count = 1) so that at
next resume dp driver crash at main link clock enable due to phy is
not physically powered on. This patch will call dp_ctrl_off_link_stream()
to tear down main link and power off phy at dp_pm_suspend() if main link
had been brought up.

Changes in V2:
-- stashed changes into dp_ctrl.c
-- add is_phy_on to monitor phy state

Changes in V3:
-- delete is_phy_on
-- call dp_ctrl_off_link_stream() from dp_pm_suspend()

Changes in V4:
-- delete changes made at dp_power.c
-- move main link status checking to dp_pm_suspend

Changes in V5:
-- correct commit id at Fixes tag

Fixes: 8dbde399044b ("drm/msm/dp: handle irq_hpd with sink_count = 0 correctly)
Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
Tested-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
---
 drivers/gpu/drm/msm/dp/dp_ctrl.c    | 10 ++++++----
 drivers/gpu/drm/msm/dp/dp_display.c |  7 ++++++-
 2 files changed, 12 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/msm/dp/dp_ctrl.c b/drivers/gpu/drm/msm/dp/dp_ctrl.c
index dbd8943..caf71fa 100644
--- a/drivers/gpu/drm/msm/dp/dp_ctrl.c
+++ b/drivers/gpu/drm/msm/dp/dp_ctrl.c
@@ -1827,10 +1827,12 @@ int dp_ctrl_off_link_stream(struct dp_ctrl *dp_ctrl)
 
 	dp_catalog_ctrl_mainlink_ctrl(ctrl->catalog, false);
 
-	ret = dp_power_clk_enable(ctrl->power, DP_STREAM_PM, false);
-	if (ret) {
-		DRM_ERROR("Failed to disable pixel clocks. ret=%d\n", ret);
-		return ret;
+	if (dp_power_clk_status(ctrl->power, DP_STREAM_PM)) {
+		ret = dp_power_clk_enable(ctrl->power, DP_STREAM_PM, false);
+		if (ret) {
+			DRM_ERROR("Failed to disable pclk. ret=%d\n", ret);
+			return ret;
+		}
 	}
 
 	ret = dp_power_clk_enable(ctrl->power, DP_CTRL_PM, false);
diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c
index cdec0a3..9c59def 100644
--- a/drivers/gpu/drm/msm/dp/dp_display.c
+++ b/drivers/gpu/drm/msm/dp/dp_display.c
@@ -1327,8 +1327,13 @@ static int dp_pm_suspend(struct device *dev)
 
 	mutex_lock(&dp->event_mutex);
 
-	if (dp->core_initialized == true)
+	if (dp->core_initialized == true) {
+		/* mainlink enabled */
+		if (dp_power_clk_status(dp->power, DP_CTRL_PM))
+			dp_ctrl_off_link_stream(dp->ctrl);
+
 		dp_display_host_deinit(dp);
+	}
 
 	dp->hpd_state = ST_SUSPENDED;
 
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project


             reply	other threads:[~2021-06-03 15:41 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-06-03 15:40 Kuogee Hsieh [this message]
2021-06-03 20:22 ` [PATCH v5] drm/msm/dp: power off DP phy at suspend Stephen Boyd
2021-06-03 21:59   ` khsieh
2021-06-03 23:19     ` Stephen Boyd
2021-06-03 23:49 Kuogee Hsieh

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1622734846-14179-1-git-send-email-khsieh@codeaurora.org \
    --to=khsieh@codeaurora.org \
    --cc=abhinavk@codeaurora.org \
    --cc=agross@kernel.org \
    --cc=aravindh@codeaurora.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=freedreno@lists.freedesktop.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robdclark@gmail.com \
    --cc=sean@poorly.run \
    --cc=swboyd@chromium.org \
    --cc=vkoul@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).