linux-arm-msm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH] arm64: dts: ipq8074: Add QUP6 I2C node
@ 2021-06-19 16:27 Robert Marko
  2021-06-21 16:30 ` patchwork-bot+linux-arm-msm
  0 siblings, 1 reply; 2+ messages in thread
From: Robert Marko @ 2021-06-19 16:27 UTC (permalink / raw)
  To: agross, bjorn.andersson, robh+dt, linux-arm-msm, devicetree,
	linux-kernel
  Cc: Robert Marko

Add node to support the QUP6 I2C controller inside
of IPQ8074.
It is exactly the same as QUP2 and QUP3 controllers.

Some routers like Xiaomi AX9000 and Netgear RBK850
use this bus.

Signed-off-by: Robert Marko <robimarko@gmail.com>
---
 arch/arm64/boot/dts/qcom/ipq8074.dtsi | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
index a5b16e151485..07404cdbf697 100644
--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
@@ -455,6 +455,21 @@ blsp1_i2c3: i2c@78b7000 {
 			status = "disabled";
 		};
 
+		blsp1_i2c6: i2c@78ba000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x078ba000 0x600>;
+			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_AHB_CLK>,
+				 <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>;
+			clock-names = "iface", "core";
+			clock-frequency = <100000>;
+			dmas = <&blsp_dma 23>, <&blsp_dma 22>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
 		qpic_bam: dma-controller@7984000 {
 			compatible = "qcom,bam-v1.7.0";
 			reg = <0x07984000 0x1a000>;
-- 
2.31.1


^ permalink raw reply related	[flat|nested] 2+ messages in thread

* Re: [PATCH] arm64: dts: ipq8074: Add QUP6 I2C node
  2021-06-19 16:27 [PATCH] arm64: dts: ipq8074: Add QUP6 I2C node Robert Marko
@ 2021-06-21 16:30 ` patchwork-bot+linux-arm-msm
  0 siblings, 0 replies; 2+ messages in thread
From: patchwork-bot+linux-arm-msm @ 2021-06-21 16:30 UTC (permalink / raw)
  To: Robert Marko; +Cc: linux-arm-msm

Hello:

This patch was applied to qcom/linux.git (refs/heads/for-next):

On Sat, 19 Jun 2021 18:27:51 +0200 you wrote:
> Add node to support the QUP6 I2C controller inside
> of IPQ8074.
> It is exactly the same as QUP2 and QUP3 controllers.
> 
> Some routers like Xiaomi AX9000 and Netgear RBK850
> use this bus.
> 
> [...]

Here is the summary with links:
  - arm64: dts: ipq8074: Add QUP6 I2C node
    https://git.kernel.org/qcom/c/abe66bb7a2f6

You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html



^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2021-06-21 16:39 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-06-19 16:27 [PATCH] arm64: dts: ipq8074: Add QUP6 I2C node Robert Marko
2021-06-21 16:30 ` patchwork-bot+linux-arm-msm

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).