From: Sibi Sankar <sibis@codeaurora.org>
To: bjorn.andersson@linaro.org, robh+dt@kernel.org, will@kernel.org,
saiprakash.ranjan@codeaurora.org
Cc: ohad@wizery.com, agross@kernel.org, mathieu.poirier@linaro.org,
robin.murphy@arm.com, joro@8bytes.org, p.zabel@pengutronix.de,
linux-arm-msm@vger.kernel.org, linux-remoteproc@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, evgreen@chromium.org,
dianders@chromium.org, swboyd@chromium.org,
Sibi Sankar <sibis@codeaurora.org>
Subject: [PATCH 3/9] dt-bindings: remoteproc: qcom: Add Q6V5 Modem PIL binding
Date: Fri, 25 Jun 2021 01:17:32 +0530 [thread overview]
Message-ID: <1624564058-24095-4-git-send-email-sibis@codeaurora.org> (raw)
In-Reply-To: <1624564058-24095-1-git-send-email-sibis@codeaurora.org>
Add a new modem compatible string for QTI SC7280 SoCs and introduce the
"qcom,ext-regs" and "qcom,qaccept-regs" bindings needed by the modem
sub-system running on SC7280 SoCs.
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
---
.../devicetree/bindings/remoteproc/qcom,q6v5.txt | 32 ++++++++++++++++++++--
1 file changed, 30 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt b/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt
index 494257010629..d802e57701b8 100644
--- a/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt
@@ -15,6 +15,7 @@ on the Qualcomm Hexagon core.
"qcom,msm8996-mss-pil"
"qcom,msm8998-mss-pil"
"qcom,sc7180-mss-pil"
+ "qcom,sc7280-mss-pil"
"qcom,sdm845-mss-pil"
- reg:
@@ -47,6 +48,7 @@ on the Qualcomm Hexagon core.
qcom,msm8996-mss-pil:
qcom,msm8998-mss-pil:
qcom,sc7180-mss-pil:
+ qcom,sc7280-mss-pil:
qcom,sdm845-mss-pil:
must be "wdog", "fatal", "ready", "handover", "stop-ack",
"shutdown-ack"
@@ -87,6 +89,8 @@ on the Qualcomm Hexagon core.
qcom,sc7180-mss-pil:
must be "iface", "bus", "xo", "snoc_axi", "mnoc_axi",
"nav"
+ qcom,sc7280-mss-pil:
+ must be "iface", "xo", "snoc_axi", "offline"
qcom,sdm845-mss-pil:
must be "iface", "bus", "mem", "xo", "gpll0_mss",
"snoc_axi", "mnoc_axi", "prng"
@@ -98,7 +102,7 @@ on the Qualcomm Hexagon core.
reference to the list of 3 reset-controllers for the
wcss sub-system
reference to the list of 2 reset-controllers for the modem
- sub-system on SC7180, SDM845 SoCs
+ sub-system on SC7180, SC7280, SDM845 SoCs
- reset-names:
Usage: required
@@ -107,7 +111,7 @@ on the Qualcomm Hexagon core.
must be "wcss_aon_reset", "wcss_reset", "wcss_q6_reset"
for the wcss sub-system
must be "mss_restart", "pdc_reset" for the modem
- sub-system on SC7180, SDM845 SoCs
+ sub-system on SC7180, SC7280, SDM845 SoCs
For devices where the mba and mpss sub-nodes are not specified, mba/mpss region
should be referenced as follows:
@@ -173,6 +177,9 @@ For the compatible string below the following supplies are required:
qcom,msm8998-mss-pil:
must be "cx", "mx"
qcom,sc7180-mss-pil:
+ must be "cx", "mx", "mss"
+ qcom,sc7280-mss-pil:
+ must be "cx", "mss"
qcom,sdm845-mss-pil:
must be "cx", "mx", "mss"
@@ -198,6 +205,9 @@ For the compatible string below the following supplies are required:
Definition: a phandle reference to a syscon representing TCSR followed
by the three offsets within syscon for q6, modem and nc
halt registers.
+ a phandle reference to a syscon representing TCSR followed
+ by the four offsets within syscon for q6, modem, nc and vq6
+ halt registers on SC7280 SoCs.
For the compatible strings below the following phandle references are required:
"qcom,sc7180-mss-pil"
@@ -208,6 +218,24 @@ For the compatible strings below the following phandle references are required:
by the offset within syscon for conn_box_spare0 register
used by the modem sub-system running on SC7180 SoC.
+For the compatible strings below the following phandle references are required:
+ "qcom,sc7280-mss-pil"
+- qcom,ext-regs:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: two phandles reference to syscons representing TCSR_REG and
+ TCSR register space followed by the two offset within the syscon
+ to force_clk_en/rscc_disable and axim1_clk_off/crypto_clk_off
+ registers respectively.
+
+- qcom,qaccept-regs:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: a phandle reference to a syscon representing TCSR followed
+ by the three offsets within syscon for mdm, cx and axi
+ qaccept registers used by the modem sub-system running on
+ SC7280 SoC.
+
The Hexagon node must contain iommus property as described in ../iommu/iommu.txt
on platforms which do not have TrustZone.
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
next prev parent reply other threads:[~2021-06-24 19:48 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-24 19:47 [PATCH 0/9] Add Modem support on SC7280 SoCs Sibi Sankar
2021-06-24 19:47 ` [PATCH 1/9] dt-bindings: remoteproc: qcom: pas: Add SC7280 MPSS support Sibi Sankar
2021-06-25 17:12 ` Matthias Kaehlcke
2021-06-25 17:28 ` Sibi Sankar
2021-06-25 23:20 ` Matthias Kaehlcke
2021-07-14 19:36 ` Rob Herring
2021-06-24 19:47 ` [PATCH 2/9] remoteproc: qcom: pas: Add SC7280 Modem support Sibi Sankar
2021-06-25 23:23 ` Matthias Kaehlcke
2021-06-24 19:47 ` Sibi Sankar [this message]
2021-06-25 23:43 ` [PATCH 3/9] dt-bindings: remoteproc: qcom: Add Q6V5 Modem PIL binding Matthias Kaehlcke
2021-06-30 19:57 ` Sibi Sankar
2021-07-14 19:37 ` Rob Herring
2021-06-24 19:47 ` [PATCH 4/9] iommu/arm-smmu-qcom: Request direct mapping for modem device Sibi Sankar
2021-06-25 4:27 ` Sai Prakash Ranjan
2021-06-24 19:47 ` [PATCH 5/9] remoteproc: mss: q6v5-mss: Add modem support on SC7280 Sibi Sankar
2021-06-25 0:35 ` Matthias Kaehlcke
2021-06-25 14:21 ` Sibi Sankar
2021-06-25 16:39 ` Matthias Kaehlcke
2021-06-24 19:47 ` [PATCH 6/9] arm64: dts: qcom: sc7280: Update reserved memory map Sibi Sankar
2021-06-28 18:11 ` Matthias Kaehlcke
2021-06-30 20:02 ` Sibi Sankar
2021-07-30 18:24 ` Bjorn Andersson
2021-06-24 19:47 ` [PATCH 7/9] arm64: dts: qcom: sc7280: Add nodes to boot modem Sibi Sankar
2021-07-30 18:00 ` Bjorn Andersson
2021-06-24 19:47 ` [PATCH 8/9] arm64: dts: qcom: sc7280: Add Q6V5 MSS node Sibi Sankar
2021-06-28 18:39 ` Matthias Kaehlcke
2021-06-30 20:03 ` Sibi Sankar
2021-07-30 18:01 ` Bjorn Andersson
2021-06-24 19:47 ` [PATCH 9/9] arm64: dts: qcom: sc7280: Update " Sibi Sankar
2021-06-28 19:05 ` Matthias Kaehlcke
2021-06-30 20:08 ` Sibi Sankar
2021-07-30 18:14 ` Bjorn Andersson
2021-07-01 20:02 ` [PATCH 0/9] Add Modem support on SC7280 SoCs Pavel Machek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1624564058-24095-4-git-send-email-sibis@codeaurora.org \
--to=sibis@codeaurora.org \
--cc=agross@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=dianders@chromium.org \
--cc=evgreen@chromium.org \
--cc=joro@8bytes.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-remoteproc@vger.kernel.org \
--cc=mathieu.poirier@linaro.org \
--cc=ohad@wizery.com \
--cc=p.zabel@pengutronix.de \
--cc=robh+dt@kernel.org \
--cc=robin.murphy@arm.com \
--cc=saiprakash.ranjan@codeaurora.org \
--cc=swboyd@chromium.org \
--cc=will@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).