* [PATCH v2] dt-bindings: cpufreq: cpufreq-qcom-hw: Convert to YAML bindings
@ 2021-10-05 4:49 Manivannan Sadhasivam
2021-10-05 12:26 ` Rob Herring
0 siblings, 1 reply; 4+ messages in thread
From: Manivannan Sadhasivam @ 2021-10-05 4:49 UTC (permalink / raw)
To: rafael, viresh.kumar, robh+dt
Cc: bjorn.andersson, linux-pm, devicetree, linux-arm-msm,
linux-kernel, Manivannan Sadhasivam, AngeloGioacchino Del Regno,
Rob Herring
Convert Qualcomm cpufreq devicetree binding to YAML.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
Changes in v2:
* Removed maxItems property as reported by the bot
.../bindings/cpufreq/cpufreq-qcom-hw.txt | 172 ---------------
.../bindings/cpufreq/cpufreq-qcom-hw.yaml | 201 ++++++++++++++++++
2 files changed, 201 insertions(+), 172 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.txt
create mode 100644 Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml
diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.txt b/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.txt
deleted file mode 100644
index 9299028ee712..000000000000
--- a/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.txt
+++ /dev/null
@@ -1,172 +0,0 @@
-Qualcomm Technologies, Inc. CPUFREQ Bindings
-
-CPUFREQ HW is a hardware engine used by some Qualcomm Technologies, Inc. (QTI)
-SoCs to manage frequency in hardware. It is capable of controlling frequency
-for multiple clusters.
-
-Properties:
-- compatible
- Usage: required
- Value type: <string>
- Definition: must be "qcom,cpufreq-hw" or "qcom,cpufreq-epss".
-
-- clocks
- Usage: required
- Value type: <phandle> From common clock binding.
- Definition: clock handle for XO clock and GPLL0 clock.
-
-- clock-names
- Usage: required
- Value type: <string> From common clock binding.
- Definition: must be "xo", "alternate".
-
-- reg
- Usage: required
- Value type: <prop-encoded-array>
- Definition: Addresses and sizes for the memory of the HW bases in
- each frequency domain.
-- reg-names
- Usage: Optional
- Value type: <string>
- Definition: Frequency domain name i.e.
- "freq-domain0", "freq-domain1".
-
-- #freq-domain-cells:
- Usage: required.
- Definition: Number of cells in a freqency domain specifier.
-
-* Property qcom,freq-domain
-Devices supporting freq-domain must set their "qcom,freq-domain" property with
-phandle to a cpufreq_hw followed by the Domain ID(0/1) in the CPU DT node.
-
-
-Example:
-
-Example 1: Dual-cluster, Quad-core per cluster. CPUs within a cluster switch
-DCVS state together.
-
-/ {
- cpus {
- #address-cells = <2>;
- #size-cells = <0>;
-
- CPU0: cpu@0 {
- device_type = "cpu";
- compatible = "qcom,kryo385";
- reg = <0x0 0x0>;
- enable-method = "psci";
- next-level-cache = <&L2_0>;
- qcom,freq-domain = <&cpufreq_hw 0>;
- L2_0: l2-cache {
- compatible = "cache";
- next-level-cache = <&L3_0>;
- L3_0: l3-cache {
- compatible = "cache";
- };
- };
- };
-
- CPU1: cpu@100 {
- device_type = "cpu";
- compatible = "qcom,kryo385";
- reg = <0x0 0x100>;
- enable-method = "psci";
- next-level-cache = <&L2_100>;
- qcom,freq-domain = <&cpufreq_hw 0>;
- L2_100: l2-cache {
- compatible = "cache";
- next-level-cache = <&L3_0>;
- };
- };
-
- CPU2: cpu@200 {
- device_type = "cpu";
- compatible = "qcom,kryo385";
- reg = <0x0 0x200>;
- enable-method = "psci";
- next-level-cache = <&L2_200>;
- qcom,freq-domain = <&cpufreq_hw 0>;
- L2_200: l2-cache {
- compatible = "cache";
- next-level-cache = <&L3_0>;
- };
- };
-
- CPU3: cpu@300 {
- device_type = "cpu";
- compatible = "qcom,kryo385";
- reg = <0x0 0x300>;
- enable-method = "psci";
- next-level-cache = <&L2_300>;
- qcom,freq-domain = <&cpufreq_hw 0>;
- L2_300: l2-cache {
- compatible = "cache";
- next-level-cache = <&L3_0>;
- };
- };
-
- CPU4: cpu@400 {
- device_type = "cpu";
- compatible = "qcom,kryo385";
- reg = <0x0 0x400>;
- enable-method = "psci";
- next-level-cache = <&L2_400>;
- qcom,freq-domain = <&cpufreq_hw 1>;
- L2_400: l2-cache {
- compatible = "cache";
- next-level-cache = <&L3_0>;
- };
- };
-
- CPU5: cpu@500 {
- device_type = "cpu";
- compatible = "qcom,kryo385";
- reg = <0x0 0x500>;
- enable-method = "psci";
- next-level-cache = <&L2_500>;
- qcom,freq-domain = <&cpufreq_hw 1>;
- L2_500: l2-cache {
- compatible = "cache";
- next-level-cache = <&L3_0>;
- };
- };
-
- CPU6: cpu@600 {
- device_type = "cpu";
- compatible = "qcom,kryo385";
- reg = <0x0 0x600>;
- enable-method = "psci";
- next-level-cache = <&L2_600>;
- qcom,freq-domain = <&cpufreq_hw 1>;
- L2_600: l2-cache {
- compatible = "cache";
- next-level-cache = <&L3_0>;
- };
- };
-
- CPU7: cpu@700 {
- device_type = "cpu";
- compatible = "qcom,kryo385";
- reg = <0x0 0x700>;
- enable-method = "psci";
- next-level-cache = <&L2_700>;
- qcom,freq-domain = <&cpufreq_hw 1>;
- L2_700: l2-cache {
- compatible = "cache";
- next-level-cache = <&L3_0>;
- };
- };
- };
-
- soc {
- cpufreq_hw: cpufreq@17d43000 {
- compatible = "qcom,cpufreq-hw";
- reg = <0x17d43000 0x1400>, <0x17d45800 0x1400>;
- reg-names = "freq-domain0", "freq-domain1";
-
- clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
- clock-names = "xo", "alternate";
-
- #freq-domain-cells = <1>;
- };
-}
diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml b/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml
new file mode 100644
index 000000000000..2f1b8b6852a0
--- /dev/null
+++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml
@@ -0,0 +1,201 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/cpufreq/cpufreq-qcom-hw.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. CPUFREQ
+
+maintainers:
+ - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+description: |
+
+ CPUFREQ HW is a hardware engine used by some Qualcomm Technologies, Inc. (QTI)
+ SoCs to manage frequency in hardware. It is capable of controlling frequency
+ for multiple clusters.
+
+properties:
+ compatible:
+ oneOf:
+ - description: v1 of CPUFREQ HW
+ items:
+ - const: qcom,cpufreq-hw
+
+ - description: v2 of CPUFREQ HW (EPSS)
+ items:
+ - enum:
+ - qcom,sm8250-cpufreq-epss
+ - const: qcom,cpufreq-epss
+
+ reg:
+ minItems: 2
+ items:
+ - description: Frequency domain 0 register region
+ - description: Frequency domain 1 register region
+ - description: Frequency domain 2 register region
+
+ reg-names:
+ minItems: 2
+ items:
+ - const: freq-domain0
+ - const: freq-domain1
+ - const: freq-domain2
+
+ clocks:
+ items:
+ - description: XO Clock
+ - description: GPLL0 Clock
+
+ clock-names:
+ items:
+ - const: xo
+ - const: alternate
+
+ '#freq-domain-cells':
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - '#freq-domain-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,gcc-sdm845.h>
+ #include <dt-bindings/clock/qcom,rpmh.h>
+
+ // Example 1: Dual-cluster, Quad-core per cluster. CPUs within a cluster
+ // switch DCVS state together.
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ CPU0: cpu@0 {
+ device_type = "cpu";
+ compatible = "qcom,kryo385";
+ reg = <0x0 0x0>;
+ enable-method = "psci";
+ next-level-cache = <&L2_0>;
+ qcom,freq-domain = <&cpufreq_hw 0>;
+ L2_0: l2-cache {
+ compatible = "cache";
+ next-level-cache = <&L3_0>;
+ L3_0: l3-cache {
+ compatible = "cache";
+ };
+ };
+ };
+
+ CPU1: cpu@100 {
+ device_type = "cpu";
+ compatible = "qcom,kryo385";
+ reg = <0x0 0x100>;
+ enable-method = "psci";
+ next-level-cache = <&L2_100>;
+ qcom,freq-domain = <&cpufreq_hw 0>;
+ L2_100: l2-cache {
+ compatible = "cache";
+ next-level-cache = <&L3_0>;
+ };
+ };
+
+ CPU2: cpu@200 {
+ device_type = "cpu";
+ compatible = "qcom,kryo385";
+ reg = <0x0 0x200>;
+ enable-method = "psci";
+ next-level-cache = <&L2_200>;
+ qcom,freq-domain = <&cpufreq_hw 0>;
+ L2_200: l2-cache {
+ compatible = "cache";
+ next-level-cache = <&L3_0>;
+ };
+ };
+
+ CPU3: cpu@300 {
+ device_type = "cpu";
+ compatible = "qcom,kryo385";
+ reg = <0x0 0x300>;
+ enable-method = "psci";
+ next-level-cache = <&L2_300>;
+ qcom,freq-domain = <&cpufreq_hw 0>;
+ L2_300: l2-cache {
+ compatible = "cache";
+ next-level-cache = <&L3_0>;
+ };
+ };
+
+ CPU4: cpu@400 {
+ device_type = "cpu";
+ compatible = "qcom,kryo385";
+ reg = <0x0 0x400>;
+ enable-method = "psci";
+ next-level-cache = <&L2_400>;
+ qcom,freq-domain = <&cpufreq_hw 1>;
+ L2_400: l2-cache {
+ compatible = "cache";
+ next-level-cache = <&L3_0>;
+ };
+ };
+
+ CPU5: cpu@500 {
+ device_type = "cpu";
+ compatible = "qcom,kryo385";
+ reg = <0x0 0x500>;
+ enable-method = "psci";
+ next-level-cache = <&L2_500>;
+ qcom,freq-domain = <&cpufreq_hw 1>;
+ L2_500: l2-cache {
+ compatible = "cache";
+ next-level-cache = <&L3_0>;
+ };
+ };
+
+ CPU6: cpu@600 {
+ device_type = "cpu";
+ compatible = "qcom,kryo385";
+ reg = <0x0 0x600>;
+ enable-method = "psci";
+ next-level-cache = <&L2_600>;
+ qcom,freq-domain = <&cpufreq_hw 1>;
+ L2_600: l2-cache {
+ compatible = "cache";
+ next-level-cache = <&L3_0>;
+ };
+ };
+
+ CPU7: cpu@700 {
+ device_type = "cpu";
+ compatible = "qcom,kryo385";
+ reg = <0x0 0x700>;
+ enable-method = "psci";
+ next-level-cache = <&L2_700>;
+ qcom,freq-domain = <&cpufreq_hw 1>;
+ L2_700: l2-cache {
+ compatible = "cache";
+ next-level-cache = <&L3_0>;
+ };
+ };
+ };
+
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cpufreq@17d43000 {
+ compatible = "qcom,cpufreq-hw";
+ reg = <0x17d43000 0x1400>, <0x17d45800 0x1400>;
+ reg-names = "freq-domain0", "freq-domain1";
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
+ clock-names = "xo", "alternate";
+
+ #freq-domain-cells = <1>;
+ };
+ };
+...
--
2.25.1
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH v2] dt-bindings: cpufreq: cpufreq-qcom-hw: Convert to YAML bindings
2021-10-05 4:49 [PATCH v2] dt-bindings: cpufreq: cpufreq-qcom-hw: Convert to YAML bindings Manivannan Sadhasivam
@ 2021-10-05 12:26 ` Rob Herring
0 siblings, 0 replies; 4+ messages in thread
From: Rob Herring @ 2021-10-05 12:26 UTC (permalink / raw)
To: Manivannan Sadhasivam
Cc: rafael, AngeloGioacchino Del Regno, viresh.kumar, linux-arm-msm,
robh+dt, devicetree, linux-kernel, linux-pm, bjorn.andersson
On Tue, 05 Oct 2021 10:19:20 +0530, Manivannan Sadhasivam wrote:
> Convert Qualcomm cpufreq devicetree binding to YAML.
>
> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
> Reviewed-by: Rob Herring <robh@kernel.org>
> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> ---
>
> Changes in v2:
>
> * Removed maxItems property as reported by the bot
>
> .../bindings/cpufreq/cpufreq-qcom-hw.txt | 172 ---------------
> .../bindings/cpufreq/cpufreq-qcom-hw.yaml | 201 ++++++++++++++++++
> 2 files changed, 201 insertions(+), 172 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.txt
> create mode 100644 Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml
>
My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):
yamllint warnings/errors:
dtschema/dtc warnings/errors:
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/dvfs/performance-domain.example.dt.yaml: performance-controller@12340000: reg: [[305397760, 4096]] is too short
From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/dvfs/performance-domain.example.dt.yaml: performance-controller@12340000: 'clocks' is a required property
From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/dvfs/performance-domain.example.dt.yaml: performance-controller@12340000: 'clock-names' is a required property
From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/dvfs/performance-domain.example.dt.yaml: performance-controller@12340000: '#freq-domain-cells' is a required property
From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/dvfs/performance-domain.example.dt.yaml: performance-controller@12340000: '#performance-domain-cells' does not match any of the regexes: 'pinctrl-[0-9]+'
From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml
doc reference errors (make refcheckdocs):
See https://patchwork.ozlabs.org/patch/1536466
This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.
If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:
pip3 install dtschema --upgrade
Please check and re-submit.
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH v2] dt-bindings: cpufreq: cpufreq-qcom-hw: Convert to YAML bindings
2020-10-12 15:50 Manivannan Sadhasivam
@ 2020-10-13 17:18 ` Rob Herring
0 siblings, 0 replies; 4+ messages in thread
From: Rob Herring @ 2020-10-13 17:18 UTC (permalink / raw)
To: Manivannan Sadhasivam
Cc: rjw, viresh.kumar, linux-pm, devicetree, linux-kernel,
bjorn.andersson, linux-arm-msm
On Mon, Oct 12, 2020 at 09:20:12PM +0530, Manivannan Sadhasivam wrote:
> Convert Qualcomm cpufreq devicetree binding to YAML.
>
> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> ---
>
> Changes in v2:
>
> * Removed qcom,freq-domain property which doesn't belong to this binding
It needs to be defined *somewhere*. As I said before, you need a
separate schema for it.
>
> .../bindings/cpufreq/cpufreq-qcom-hw.txt | 172 ---------------
> .../bindings/cpufreq/cpufreq-qcom-hw.yaml | 204 ++++++++++++++++++
> 2 files changed, 204 insertions(+), 172 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.txt
> create mode 100644 Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml
^ permalink raw reply [flat|nested] 4+ messages in thread
* [PATCH v2] dt-bindings: cpufreq: cpufreq-qcom-hw: Convert to YAML bindings
@ 2020-10-12 15:50 Manivannan Sadhasivam
2020-10-13 17:18 ` Rob Herring
0 siblings, 1 reply; 4+ messages in thread
From: Manivannan Sadhasivam @ 2020-10-12 15:50 UTC (permalink / raw)
To: rjw, viresh.kumar, robh+dt
Cc: linux-pm, devicetree, linux-kernel, bjorn.andersson,
linux-arm-msm, Manivannan Sadhasivam
Convert Qualcomm cpufreq devicetree binding to YAML.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
Changes in v2:
* Removed qcom,freq-domain property which doesn't belong to this binding
.../bindings/cpufreq/cpufreq-qcom-hw.txt | 172 ---------------
.../bindings/cpufreq/cpufreq-qcom-hw.yaml | 204 ++++++++++++++++++
2 files changed, 204 insertions(+), 172 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.txt
create mode 100644 Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml
diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.txt b/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.txt
deleted file mode 100644
index 9299028ee712..000000000000
--- a/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.txt
+++ /dev/null
@@ -1,172 +0,0 @@
-Qualcomm Technologies, Inc. CPUFREQ Bindings
-
-CPUFREQ HW is a hardware engine used by some Qualcomm Technologies, Inc. (QTI)
-SoCs to manage frequency in hardware. It is capable of controlling frequency
-for multiple clusters.
-
-Properties:
-- compatible
- Usage: required
- Value type: <string>
- Definition: must be "qcom,cpufreq-hw" or "qcom,cpufreq-epss".
-
-- clocks
- Usage: required
- Value type: <phandle> From common clock binding.
- Definition: clock handle for XO clock and GPLL0 clock.
-
-- clock-names
- Usage: required
- Value type: <string> From common clock binding.
- Definition: must be "xo", "alternate".
-
-- reg
- Usage: required
- Value type: <prop-encoded-array>
- Definition: Addresses and sizes for the memory of the HW bases in
- each frequency domain.
-- reg-names
- Usage: Optional
- Value type: <string>
- Definition: Frequency domain name i.e.
- "freq-domain0", "freq-domain1".
-
-- #freq-domain-cells:
- Usage: required.
- Definition: Number of cells in a freqency domain specifier.
-
-* Property qcom,freq-domain
-Devices supporting freq-domain must set their "qcom,freq-domain" property with
-phandle to a cpufreq_hw followed by the Domain ID(0/1) in the CPU DT node.
-
-
-Example:
-
-Example 1: Dual-cluster, Quad-core per cluster. CPUs within a cluster switch
-DCVS state together.
-
-/ {
- cpus {
- #address-cells = <2>;
- #size-cells = <0>;
-
- CPU0: cpu@0 {
- device_type = "cpu";
- compatible = "qcom,kryo385";
- reg = <0x0 0x0>;
- enable-method = "psci";
- next-level-cache = <&L2_0>;
- qcom,freq-domain = <&cpufreq_hw 0>;
- L2_0: l2-cache {
- compatible = "cache";
- next-level-cache = <&L3_0>;
- L3_0: l3-cache {
- compatible = "cache";
- };
- };
- };
-
- CPU1: cpu@100 {
- device_type = "cpu";
- compatible = "qcom,kryo385";
- reg = <0x0 0x100>;
- enable-method = "psci";
- next-level-cache = <&L2_100>;
- qcom,freq-domain = <&cpufreq_hw 0>;
- L2_100: l2-cache {
- compatible = "cache";
- next-level-cache = <&L3_0>;
- };
- };
-
- CPU2: cpu@200 {
- device_type = "cpu";
- compatible = "qcom,kryo385";
- reg = <0x0 0x200>;
- enable-method = "psci";
- next-level-cache = <&L2_200>;
- qcom,freq-domain = <&cpufreq_hw 0>;
- L2_200: l2-cache {
- compatible = "cache";
- next-level-cache = <&L3_0>;
- };
- };
-
- CPU3: cpu@300 {
- device_type = "cpu";
- compatible = "qcom,kryo385";
- reg = <0x0 0x300>;
- enable-method = "psci";
- next-level-cache = <&L2_300>;
- qcom,freq-domain = <&cpufreq_hw 0>;
- L2_300: l2-cache {
- compatible = "cache";
- next-level-cache = <&L3_0>;
- };
- };
-
- CPU4: cpu@400 {
- device_type = "cpu";
- compatible = "qcom,kryo385";
- reg = <0x0 0x400>;
- enable-method = "psci";
- next-level-cache = <&L2_400>;
- qcom,freq-domain = <&cpufreq_hw 1>;
- L2_400: l2-cache {
- compatible = "cache";
- next-level-cache = <&L3_0>;
- };
- };
-
- CPU5: cpu@500 {
- device_type = "cpu";
- compatible = "qcom,kryo385";
- reg = <0x0 0x500>;
- enable-method = "psci";
- next-level-cache = <&L2_500>;
- qcom,freq-domain = <&cpufreq_hw 1>;
- L2_500: l2-cache {
- compatible = "cache";
- next-level-cache = <&L3_0>;
- };
- };
-
- CPU6: cpu@600 {
- device_type = "cpu";
- compatible = "qcom,kryo385";
- reg = <0x0 0x600>;
- enable-method = "psci";
- next-level-cache = <&L2_600>;
- qcom,freq-domain = <&cpufreq_hw 1>;
- L2_600: l2-cache {
- compatible = "cache";
- next-level-cache = <&L3_0>;
- };
- };
-
- CPU7: cpu@700 {
- device_type = "cpu";
- compatible = "qcom,kryo385";
- reg = <0x0 0x700>;
- enable-method = "psci";
- next-level-cache = <&L2_700>;
- qcom,freq-domain = <&cpufreq_hw 1>;
- L2_700: l2-cache {
- compatible = "cache";
- next-level-cache = <&L3_0>;
- };
- };
- };
-
- soc {
- cpufreq_hw: cpufreq@17d43000 {
- compatible = "qcom,cpufreq-hw";
- reg = <0x17d43000 0x1400>, <0x17d45800 0x1400>;
- reg-names = "freq-domain0", "freq-domain1";
-
- clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
- clock-names = "xo", "alternate";
-
- #freq-domain-cells = <1>;
- };
-}
diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml b/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml
new file mode 100644
index 000000000000..bc81b6203e27
--- /dev/null
+++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml
@@ -0,0 +1,204 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/cpufreq/cpufreq-qcom-hw.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. CPUFREQ
+
+maintainers:
+ - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+description: |
+
+ CPUFREQ HW is a hardware engine used by some Qualcomm Technologies, Inc. (QTI)
+ SoCs to manage frequency in hardware. It is capable of controlling frequency
+ for multiple clusters.
+
+properties:
+ compatible:
+ oneOf:
+ - description: v1 of CPUFREQ HW
+ items:
+ - const: qcom,cpufreq-hw
+
+ - description: v2 of CPUFREQ HW (EPSS)
+ items:
+ - enum:
+ - qcom,sm8250-cpufreq-epss
+ - const: qcom,cpufreq-epss
+
+ reg:
+ minItems: 2
+ maxItems: 3
+ items:
+ - description: Frequency domain 0 register region
+ - description: Frequency domain 1 register region
+ - description: Frequency domain 2 register region
+
+ reg-names:
+ minItems: 2
+ maxItems: 3
+ items:
+ - const: freq-domain0
+ - const: freq-domain1
+ - const: freq-domain2
+
+ clocks:
+ items:
+ - description: XO Clock
+ - description: GPLL0 Clock
+
+ clock-names:
+ items:
+ - const: xo
+ - const: alternate
+
+ '#freq-domain-cells':
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - clocks
+ - clock-names
+ - '#freq-domain-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,gcc-sdm845.h>
+ #include <dt-bindings/clock/qcom,rpmh.h>
+
+ // Example 1: Dual-cluster, Quad-core per cluster. CPUs within a cluster
+ // switch DCVS state together.
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ CPU0: cpu@0 {
+ device_type = "cpu";
+ compatible = "qcom,kryo385";
+ reg = <0x0 0x0>;
+ enable-method = "psci";
+ next-level-cache = <&L2_0>;
+ qcom,freq-domain = <&cpufreq_hw 0>;
+ L2_0: l2-cache {
+ compatible = "cache";
+ next-level-cache = <&L3_0>;
+ L3_0: l3-cache {
+ compatible = "cache";
+ };
+ };
+ };
+
+ CPU1: cpu@100 {
+ device_type = "cpu";
+ compatible = "qcom,kryo385";
+ reg = <0x0 0x100>;
+ enable-method = "psci";
+ next-level-cache = <&L2_100>;
+ qcom,freq-domain = <&cpufreq_hw 0>;
+ L2_100: l2-cache {
+ compatible = "cache";
+ next-level-cache = <&L3_0>;
+ };
+ };
+
+ CPU2: cpu@200 {
+ device_type = "cpu";
+ compatible = "qcom,kryo385";
+ reg = <0x0 0x200>;
+ enable-method = "psci";
+ next-level-cache = <&L2_200>;
+ qcom,freq-domain = <&cpufreq_hw 0>;
+ L2_200: l2-cache {
+ compatible = "cache";
+ next-level-cache = <&L3_0>;
+ };
+ };
+
+ CPU3: cpu@300 {
+ device_type = "cpu";
+ compatible = "qcom,kryo385";
+ reg = <0x0 0x300>;
+ enable-method = "psci";
+ next-level-cache = <&L2_300>;
+ qcom,freq-domain = <&cpufreq_hw 0>;
+ L2_300: l2-cache {
+ compatible = "cache";
+ next-level-cache = <&L3_0>;
+ };
+ };
+
+ CPU4: cpu@400 {
+ device_type = "cpu";
+ compatible = "qcom,kryo385";
+ reg = <0x0 0x400>;
+ enable-method = "psci";
+ next-level-cache = <&L2_400>;
+ qcom,freq-domain = <&cpufreq_hw 1>;
+ L2_400: l2-cache {
+ compatible = "cache";
+ next-level-cache = <&L3_0>;
+ };
+ };
+
+ CPU5: cpu@500 {
+ device_type = "cpu";
+ compatible = "qcom,kryo385";
+ reg = <0x0 0x500>;
+ enable-method = "psci";
+ next-level-cache = <&L2_500>;
+ qcom,freq-domain = <&cpufreq_hw 1>;
+ L2_500: l2-cache {
+ compatible = "cache";
+ next-level-cache = <&L3_0>;
+ };
+ };
+
+ CPU6: cpu@600 {
+ device_type = "cpu";
+ compatible = "qcom,kryo385";
+ reg = <0x0 0x600>;
+ enable-method = "psci";
+ next-level-cache = <&L2_600>;
+ qcom,freq-domain = <&cpufreq_hw 1>;
+ L2_600: l2-cache {
+ compatible = "cache";
+ next-level-cache = <&L3_0>;
+ };
+ };
+
+ CPU7: cpu@700 {
+ device_type = "cpu";
+ compatible = "qcom,kryo385";
+ reg = <0x0 0x700>;
+ enable-method = "psci";
+ next-level-cache = <&L2_700>;
+ qcom,freq-domain = <&cpufreq_hw 1>;
+ L2_700: l2-cache {
+ compatible = "cache";
+ next-level-cache = <&L3_0>;
+ };
+ };
+ };
+
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cpufreq@17d43000 {
+ compatible = "qcom,cpufreq-hw";
+ reg = <0x17d43000 0x1400>, <0x17d45800 0x1400>;
+ reg-names = "freq-domain0", "freq-domain1";
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
+ clock-names = "xo", "alternate";
+
+ #freq-domain-cells = <1>;
+ };
+ };
+...
--
2.17.1
^ permalink raw reply related [flat|nested] 4+ messages in thread
end of thread, other threads:[~2021-10-05 12:27 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-10-05 4:49 [PATCH v2] dt-bindings: cpufreq: cpufreq-qcom-hw: Convert to YAML bindings Manivannan Sadhasivam
2021-10-05 12:26 ` Rob Herring
-- strict thread matches above, loose matches on Subject: below --
2020-10-12 15:50 Manivannan Sadhasivam
2020-10-13 17:18 ` Rob Herring
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).