[PATCH linux-next] PCI: qcom-ep: Remove surplus dev_err() when using platform_get_irq_byname()

[PATCH linux-next] PCI: qcom-ep: Remove surplus dev_err() when using platform_get_irq_byname()

[Krzysztof Wilczyński]

There is no need to call the dev_err() function directly to print a
custom message when handling an error from either the platform_get_irq()
or platform_get_irq_byname() functions as both are going to display an
appropriate error message in case of a failure.

This change is as per suggestions from Coccinelle, e.g.,
  drivers/pci/controller/dwc/pcie-qcom-ep.c:556:2-9: line 556 is redundant because platform_get_irq() already prints an error

Related:
  https://lore.kernel.org/all/20210310131913.2802385-1-kw@linux.com/
  https://lore.kernel.org/all/20200802142601.1635926-1-kw@linux.com/

Signed-off-by: Krzysztof Wilczyński <kw@linux.com>
---
 drivers/pci/controller/dwc/pcie-qcom-ep.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/drivers/pci/controller/dwc/pcie-qcom-ep.c b/drivers/pci/controller/dwc/pcie-qcom-ep.c
index 7b17da2f9b3f..cdabd514dcc1 100644
--- a/drivers/pci/controller/dwc/pcie-qcom-ep.c
+++ b/drivers/pci/controller/dwc/pcie-qcom-ep.c
@@ -552,10 +552,8 @@ static int qcom_pcie_ep_enable_irq_resources(struct platform_device *pdev,
 	int irq, ret;
 
 	irq = platform_get_irq_byname(pdev, "global");
-	if (irq < 0) {
-		dev_err(&pdev->dev, "Failed to get Global IRQ\n");
+	if (irq < 0)
 		return irq;
-	}
 
 	ret = devm_request_threaded_irq(&pdev->dev, irq, NULL,
 					qcom_pcie_ep_global_irq_thread,
-- 
2.33.1

Re: [PATCH linux-next] PCI: qcom-ep: Remove surplus dev_err() when using platform_get_irq_byname()

[Lorenzo Pieralisi]

On Wed, 27 Oct 2021 11:29:31 +0000, Krzysztof Wilczyński wrote:
> There is no need to call the dev_err() function directly to print a
> custom message when handling an error from either the platform_get_irq()
> or platform_get_irq_byname() functions as both are going to display an
> appropriate error message in case of a failure.
> 
> This change is as per suggestions from Coccinelle, e.g.,
>   drivers/pci/controller/dwc/pcie-qcom-ep.c:556:2-9: line 556 is redundant because platform_get_irq() already prints an error
> 
> [...]

Applied to pci/dwc, thanks!

[1/1] PCI: qcom-ep: Remove surplus dev_err() when using platform_get_irq_byname()
      https://git.kernel.org/lpieralisi/pci/c/549bf94dd2

Thanks,
Lorenzo