[v15 3/6] usb: dwc3: core: Host wake up support from system suspend

[Krishna Kurapati <quic_kriskura@quicinc.com>]

From: Sandeep Maheswaram <quic_c_sanm@quicinc.com>

During suspend read the status of all port and set hs phy mode
based on current speed. Use this hs phy mode to configure wakeup
interrupts in qcom glue driver.

Check wakeup-source property for dwc3 core node to set the
wakeup capability. Drop the device_init_wakeup call from
runtime suspend and resume.

Also check during suspend if any wakeup capable devices are
connected to the controller (directly or through hubs), if there
are none set a flag to indicate that the PHY is powered
down during suspend.

Signed-off-by: Sandeep Maheswaram <quic_c_sanm@quicinc.com>
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
---
 drivers/usb/dwc3/core.c | 33 ++++++++++++++++++++-------------
 drivers/usb/dwc3/core.h |  4 ++++
 drivers/usb/dwc3/host.c | 24 ++++++++++++++++++++++++
 3 files changed, 48 insertions(+), 13 deletions(-)

diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 950e238..cf377f5 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -33,6 +33,7 @@
 #include <linux/usb/gadget.h>
 #include <linux/usb/of.h>
 #include <linux/usb/otg.h>
+#include <linux/usb/hcd.h>
 
 #include "core.h"
 #include "gadget.h"
@@ -1787,6 +1788,7 @@ static int dwc3_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, dwc);
 	dwc3_cache_hwparams(dwc);
+	device_init_wakeup(&pdev->dev, of_property_read_bool(dev->of_node, "wakeup-source"));
 
 	spin_lock_init(&dwc->lock);
 	mutex_init(&dwc->mutex);
@@ -1936,6 +1938,7 @@ static int dwc3_suspend_common(struct dwc3 *dwc, pm_message_t msg)
 {
 	unsigned long	flags;
 	u32 reg;
+	struct usb_hcd  *hcd = platform_get_drvdata(dwc->xhci);
 
 	switch (dwc->current_dr_role) {
 	case DWC3_GCTL_PRTCAP_DEVICE:
@@ -1948,10 +1951,7 @@ static int dwc3_suspend_common(struct dwc3 *dwc, pm_message_t msg)
 		dwc3_core_exit(dwc);
 		break;
 	case DWC3_GCTL_PRTCAP_HOST:
-		if (!PMSG_IS_AUTO(msg)) {
-			dwc3_core_exit(dwc);
-			break;
-		}
+		dwc3_check_phy_speed_mode(dwc);
 
 		/* Let controller to suspend HSPHY before PHY driver suspends */
 		if (dwc->dis_u2_susphy_quirk ||
@@ -1967,6 +1967,16 @@ static int dwc3_suspend_common(struct dwc3 *dwc, pm_message_t msg)
 
 		phy_pm_runtime_put_sync(dwc->usb2_generic_phy);
 		phy_pm_runtime_put_sync(dwc->usb3_generic_phy);
+
+		if (!PMSG_IS_AUTO(msg)) {
+			if (device_may_wakeup(dwc->dev) &&
+					device_wakeup_path(dwc->dev)) {
+				dwc->phy_power_off = false;
+			} else {
+				dwc->phy_power_off = true;
+				dwc3_core_exit(dwc);
+			}
+		}
 		break;
 	case DWC3_GCTL_PRTCAP_OTG:
 		/* do nothing during runtime_suspend */
@@ -2010,11 +2020,12 @@ static int dwc3_resume_common(struct dwc3 *dwc, pm_message_t msg)
 		break;
 	case DWC3_GCTL_PRTCAP_HOST:
 		if (!PMSG_IS_AUTO(msg)) {
-			ret = dwc3_core_init_for_resume(dwc);
-			if (ret)
-				return ret;
-			dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_HOST);
-			break;
+			if (dwc->phy_power_off) {
+				ret = dwc3_core_init_for_resume(dwc);
+				if (ret)
+					return ret;
+				dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_HOST);
+			}
 		}
 		/* Restore GUSB2PHYCFG bits that were modified in suspend */
 		reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
@@ -2086,8 +2097,6 @@ static int dwc3_runtime_suspend(struct device *dev)
 	if (ret)
 		return ret;
 
-	device_init_wakeup(dev, true);
-
 	return 0;
 }
 
@@ -2096,8 +2105,6 @@ static int dwc3_runtime_resume(struct device *dev)
 	struct dwc3     *dwc = dev_get_drvdata(dev);
 	int		ret;
 
-	device_init_wakeup(dev, false);
-
 	ret = dwc3_resume_common(dwc, PMSG_AUTO_RESUME);
 	if (ret)
 		return ret;
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index 81c486b..37397a8 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -1155,6 +1155,9 @@ struct dwc3 {
 
 	bool			phys_ready;
 
+	unsigned int            hs_phy_mode;
+	bool			phy_power_off;
+
 	struct ulpi		*ulpi;
 	bool			ulpi_ready;
 
@@ -1539,6 +1542,7 @@ int dwc3_core_soft_reset(struct dwc3 *dwc);
 #if IS_ENABLED(CONFIG_USB_DWC3_HOST) || IS_ENABLED(CONFIG_USB_DWC3_DUAL_ROLE)
 int dwc3_host_init(struct dwc3 *dwc);
 void dwc3_host_exit(struct dwc3 *dwc);
+void dwc3_check_phy_speed_mode(struct dwc3 *dwc);
 #else
 static inline int dwc3_host_init(struct dwc3 *dwc)
 { return 0; }
diff --git a/drivers/usb/dwc3/host.c b/drivers/usb/dwc3/host.c
index eda8719..3902b56 100644
--- a/drivers/usb/dwc3/host.c
+++ b/drivers/usb/dwc3/host.c
@@ -13,6 +13,7 @@
 #include <linux/platform_device.h>
 
 #include "core.h"
+#include "../host/xhci.h"
 
 static void dwc3_host_fill_xhci_irq_res(struct dwc3 *dwc,
 					int irq, char *name)
@@ -138,3 +139,26 @@ void dwc3_host_exit(struct dwc3 *dwc)
 {
 	platform_device_unregister(dwc->xhci);
 }
+
+void dwc3_check_phy_speed_mode(struct dwc3 *dwc)
+{
+	int i, num_ports;
+	u32 reg;
+	struct usb_hcd	*hcd = platform_get_drvdata(dwc->xhci);
+	struct xhci_hcd	*xhci_hcd = hcd_to_xhci(hcd);
+
+	dwc->hs_phy_mode = 0;
+
+	reg = readl(&xhci_hcd->cap_regs->hcs_params1);
+
+	num_ports = HCS_MAX_PORTS(reg);
+	for (i = 0; i < num_ports; i++) {
+		reg = readl(&xhci_hcd->op_regs->port_status_base + i * NUM_PORT_REGS);
+		if (reg & PORT_PE) {
+			if (DEV_HIGHSPEED(reg) || DEV_FULLSPEED(reg))
+				dwc->hs_phy_mode |= PHY_MODE_USB_HOST_HS;
+			else if (DEV_LOWSPEED(reg))
+				dwc->hs_phy_mode |= PHY_MODE_USB_HOST_LS;
+		}
+	}
+}
-- 
2.7.4