From mboxrd@z Thu Jan 1 00:00:00 1970 From: Borislav Petkov Subject: Re: [PATCH v4 1/6] edac: Don't try to cancel workqueue when it's never setup Date: Tue, 7 Jan 2014 18:19:55 +0100 Message-ID: <20140107171955.GA4164@pd.tnic> References: <1388434457-4194-1-git-send-email-sboyd@codeaurora.org> <1388434457-4194-2-git-send-email-sboyd@codeaurora.org> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Content-Disposition: inline In-Reply-To: <1388434457-4194-2-git-send-email-sboyd@codeaurora.org> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=m.gmane.org@lists.infradead.org To: Stephen Boyd Cc: linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-edac@vger.kernel.org List-Id: linux-arm-msm@vger.kernel.org On Mon, Dec 30, 2013 at 12:14:12PM -0800, Stephen Boyd wrote: > We only setup a workqueue for edac devices that use the polling > method. We still try to cancel the workqueue if an edac_device > uses the irq method though. This causes a warning from debug > objects when we remove an edac device: > > WARNING: CPU: 0 PID: 56 at lib/debugobjects.c:260 debug_print_object+0x98/0xc0() > ODEBUG: assert_init not available (active state 0) object type: timer_list hint: stub_timer+0x0/0x28 > Modules linked in: krait_edac(-) > CPU: 0 PID: 56 Comm: rmmod Not tainted 3.12.0-rc2-00035-g15292a0 #69 > (unwind_backtrace+0x0/0x144) > (show_stack+0x20/0x24) > (dump_stack+0x74/0xb4) > (warn_slowpath_common+0x78/0x9c) > (warn_slowpath_fmt+0x40/0x48) > (debug_print_object+0x98/0xc0) > (debug_object_assert_init+0xdc/0xec) > (del_timer+0x24/0x7c) > (try_to_grab_pending+0xc0/0x1b0) > (cancel_delayed_work+0x2c/0xa0) > (edac_device_workq_teardown+0x1c/0x38) > (edac_device_del_device+0xb8/0xe4) > (krait_edac_remove+0x50/0x70 [krait_edac]) > (platform_drv_remove+0x24/0x28) > (__device_release_driver+0x68/0xc0) > (driver_detach+0xc4/0xc8) > (bus_remove_driver+0xac/0x114) > (driver_unregister+0x38/0x58) > (platform_driver_unregister+0x1c/0x20) > (krait_edac_driver_exit+0x14/0x1c [krait_edac]) > (SyS_delete_module+0x178/0x2b4) > > Fix it by skipping the workqueue teardown for such devices. > > Acked-by: Borislav Petkov > Signed-off-by: Stephen Boyd Applied, thanks. -- Regards/Gruss, Boris. Sent from a fat crate under my desk. Formatting is fine. --