Re: [PATCH V2 4/6] slim: qcom: Add Qualcomm Slimbus controller driver

[Mark Brown <broonie@kernel.org>]

[-- Attachment #1: Type: text/plain, Size: 5972 bytes --]

On Tue, Jun 16, 2015 at 07:46:02PM -0600, Sagar Dharia wrote:

> + - dmaengine, and pipes used to communicate between controller and memory if
> +	sps-BAM HW is used

This needs more detail.

> +		 */
> +		mb();
> +		if (notify_rx)
> +			complete(&dev->rx_msgq_notify);
> +	}
> +	return IRQ_HANDLED;

This interrupt handler unconditionally returns IRQ_HANDLED regardless of
if that's true or not.

> +static void msm_slim_wait_retry(struct msm_slim_ctrl *dev)
> +{
> +	int msec_per_frm = 0;
> +	int sfr_per_sec;
> +
> +	/* Wait for 1 superframe, or default time and then retry */
> +	sfr_per_sec = dev->framer.superfreq /
> +			(1 << (SLIM_MAX_CLK_GEAR - dev->ctrl.clkgear));
> +	if (sfr_per_sec)
> +		msec_per_frm = MSEC_PER_SEC / sfr_per_sec;
> +	if (msec_per_frm < DEF_RETRY_MS)
> +		msec_per_frm = DEF_RETRY_MS;
> +	msleep(msec_per_frm);
> +}

Is this device specific?

> +static void msm_slim_cb(void *ctx, int err)
> +{
> +	if (err)
> +		pr_err("MSM-slim completion reported err:%d\n", err);

dev_err()?

> +	else if (ctx)
> +		complete(ctx);
> +}

That's weird, if we get an error we don't signal whatever's waiting -
won't it just time out at best then?  Also, what happens if we get
neither an error nor context?

> +	if (txn->msg->wbuf)
> +		memcpy(puc, txn->msg->wbuf, txn->msg->num_bytes);
> +	msm_slim_queue_tx(dev, pbuf, txn->rl, MGR_TX_MSG);
> +	timeout = wait_for_completion_timeout(&done,
> +					      msecs_to_jiffies(txn->rl + 100));
> +
> +	if (!timeout)
> +		dev_err(dev->dev, "TX timed out:MC:0x%x,mt:0x%x\n", txn->mc,
> +			txn->mt);
> +
> +	mutex_unlock(&dev->txn_lock);
> +	return timeout ? 0 : -ETIMEDOUT;
> +}

Shouldn't we provide a route for error reports here (and might some of
this timeout stuff go into the core)?

> +
> +	if ((msm_slim_put_rx(dev, (u8 *)buf)) != -ENODATA) {
> +		len = buf[0] & 0x1F;
> +		mt = (buf[0] >> 5) & 0x7;
> +		mc = buf[1];
> +		if (mt == SLIM_MSG_MT_CORE &&
> +			mc == SLIM_MSG_MC_REPORT_PRESENT) {

Looks like a switch statement.

> +static int msm_slim_rx_msgq_thread(void *data)
> +{
> +	struct msm_slim_ctrl *dev = (struct msm_slim_ctrl *)data;
> +	struct completion *notify = &dev->rx_msgq_notify;
> +	int ret;
> +
> +	while (!kthread_should_stop()) {
> +		set_current_state(TASK_INTERRUPTIBLE);
> +		ret = wait_for_completion_interruptible(notify);
> +
> +		if (ret)
> +			dev_err(dev->dev, "rx thread wait error:%d\n", ret);
> +		else
> +			msm_slim_rxwq(dev);
> +	}
> +
> +	return 0;
> +}

It's not entirely clear to me why this is a kthread rather than a
workqueue or something.  I'm also unclear what happens if more than one
piece of work is queued prior to msm_slim_rxwq() running, it looks like
it only handles a single operation.

> +	/* SLEW RATE register for this slimbus */
> +	dev->slew_mem = platform_get_resource_byname(pdev, IORESOURCE_MEM,
> +						"slimbus_slew_reg");
> +	if (!dev->slew_mem) {
> +		dev_err(&pdev->dev, "no slimbus slew resource\n");
> +		return;
> +	}

Warning not an error isn't it?

> +	hclk = clk_get(&pdev->dev, "iface_clk");
> +	if (IS_ERR(hclk))
> +		return PTR_ERR(hclk);

devm_clk_get()

> +	ret = clk_set_rate(rclk, SLIM_ROOT_FREQ);

You're ignoring this error in spite of assigning to ret.

> +	slim_mem = platform_get_resource_byname(pdev, IORESOURCE_MEM,
> +						"slimbus_physical");
> +	if (!slim_mem) {
> +		dev_err(&pdev->dev, "no slimbus physical memory resource\n");
> +		ret = ENODEV;
> +		goto err_get_mem_failed;
> +	}
> +	slim_io = request_mem_region(slim_mem->start, resource_size(slim_mem),
> +					pdev->name);
> +	if (!slim_io) {
> +		dev_err(&pdev->dev, "slimbus memory already claimed\n");
> +		ret = EBUSY;
> +		goto err_get_mem_failed;
> +	}

devm_ioremap_resource() and a lot of this starts looking simpler.

> +	dev = kzalloc(sizeof(struct msm_slim_ctrl), GFP_KERNEL);

devm_kzalloc()

> +	if (pdev->dev.of_node) {
> +
> +		ret = of_property_read_u32(pdev->dev.of_node, "cell-index",
> +					&dev->ctrl.nr);

Was that in the binding?

> +	/* Register with framework before enabling frame, clock */
> +	ret = slim_add_numbered_controller(&dev->ctrl);
> +	if (ret) {
> +		dev_err(dev->dev, "error adding controller\n");
> +		goto err_ctrl_failed;
> +	}

This is suspicious - why are you adding a numbered controller with DT?
And looking at this interface why is it a separate call to add a
numbered controller, why not just register the controller using the same
API and handle any number that was set when doing that?

> +	dev->ver = readl_relaxed(dev->base);
> +	/* Version info in 16 MSbits */
> +	dev->ver >>= 16;
> +	/* Component register initialization */
> +	writel_relaxed(1, dev->base + CFG_PORT(COMP_CFG, dev->ver));
> +	writel_relaxed((EE_MGR_RSC_GRP | EE_NGD_2 | EE_NGD_1),
> +				dev->base + CFG_PORT(COMP_TRUST_CFG, dev->ver));

You've registered the device with the core prior to initialising the
hardware - I'd expect this means the generic code will start trying to
register slaves immediately.  The normal pattern would be to initialise
the hardware then register it.

> +#ifdef CONFIG_PM_SLEEP
> +static int msm_slim_suspend(struct device *dev)
> +{
> +	return 0;
> +}
> +
> +static int msm_slim_resume(struct device *dev)
> +{
> +	return 0;
> +}
> +#endif /* CONFIG_PM_SLEEP */

Omit empty functions.

> +static int msm_slim_init(void)
> +{
> +	return platform_driver_register(&msm_slim_driver);
> +}
> +module_init(msm_slim_init);

module_platform_driver().

> +u8 *msm_slim_get_tx(struct msm_slim_ctrl *dev, struct msm_wr_cb *cur)
> +{
> +	unsigned long flags;
> +	int idx;
> +
> +	spin_lock_irqsave(&dev->tx.lock, flags);
> +	if (((dev->tx.head + 1) % MSM_TX_MSGS) == dev->tx.tail) {
> +		spin_unlock_irqrestore(&dev->tx.lock, flags);
> +		return NULL;
> +	}
> +	idx = dev->tx.tail;
> +	dev->tx.tail = (dev->tx.tail + 1) % MSM_TX_MSGS;
> +	spin_unlock_irqrestore(&dev->tx.lock, flags);
> +	dev->pending_wr[idx] = cur;
> +	return dev->tx.base + (idx * SLIM_MSGQ_BUF_LEN);
> +}

Would just using a regular list hurt?

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 473 bytes --]