From: Bjorn Andersson <bjorn.andersson@linaro.org>
To: Avaneesh Kumar Dwivedi <akdwived@codeaurora.org>
Cc: linux-remoteproc@vger.kernel.org, linux-arm-msm@vger.kernel.org,
spjoshi@codeaurora.org, kaushalk@codeaurora.org
Subject: Re: [PATCH 1/5] remoteproc: Add q6v55 specific parameters and enable probing for q6v55
Date: Tue, 25 Oct 2016 11:47:08 -0700 [thread overview]
Message-ID: <20161025184708.GM7509@tuxbot> (raw)
In-Reply-To: <1477324559-24752-2-git-send-email-akdwived@codeaurora.org>
On Mon 24 Oct 08:55 PDT 2016, Avaneesh Kumar Dwivedi wrote:
> Adding required definition of parameters along with new structure
> fields specific to q6v55 and enabling probe for q6v55 mss remote-
> proc driver.
>
> Signed-off-by: Avaneesh Kumar Dwivedi <akdwived@codeaurora.org>
> ---
> .../devicetree/bindings/remoteproc/qcom,q6v5.txt | 3 +-
> drivers/remoteproc/qcom_q6v5_pil.c | 33 ++++++++++++++++++++--
> 2 files changed, 32 insertions(+), 4 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt b/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt
> index 57cb49e..0986f8b 100644
> --- a/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt
> +++ b/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt
> @@ -7,7 +7,8 @@ on the Qualcomm Hexagon core.
> Usage: required
> Value type: <string>
> Definition: must be one of:
> - "qcom,q6v5-pil"
> + "qcom,q6v5-pil",
> + "qcom,q6v55-pil"
>
> - reg:
> Usage: required
> diff --git a/drivers/remoteproc/qcom_q6v5_pil.c b/drivers/remoteproc/qcom_q6v5_pil.c
> index 2e0caaa..8df95a0 100644
> --- a/drivers/remoteproc/qcom_q6v5_pil.c
> +++ b/drivers/remoteproc/qcom_q6v5_pil.c
> @@ -30,13 +30,14 @@
> #include <linux/reset.h>
> #include <linux/soc/qcom/smem.h>
> #include <linux/soc/qcom/smem_state.h>
> +#include <linux/mutex.h>
>
> #include "remoteproc_internal.h"
> #include "qcom_mdt_loader.h"
>
> #include <linux/qcom_scm.h>
>
> -#define MBA_FIRMWARE_NAME "mba.b00"
> +#define MBA_FIRMWARE_NAME "mba.mbn"
On 8974 we must load the mba.b00, on 8916 and 8996 we must load mba.mbn.
But looking at downstream we seem to have:
8974: q6v5 -> mba.b00
8916: q6v56 -> mba.mbn
8996: q6v55 -> mba.mbn
So we should be able to pick this based on compatible then.
> #define MPSS_FIRMWARE_NAME "modem.mdt"
>
> #define MPSS_CRASH_REASON_SMEM 421
> @@ -65,6 +66,8 @@
> #define QDSP6SS_RESET_REG 0x014
> #define QDSP6SS_GFMUX_CTL_REG 0x020
> #define QDSP6SS_PWR_CTL_REG 0x030
> +#define QDSP6SS_MEM_PWR_CTL 0x0B0
> +#define QDSP6SS_STRAP_ACC 0x110
>
> /* AXI Halt Register Offsets */
> #define AXI_HALTREQ_REG 0x0
> @@ -93,13 +96,24 @@
> #define QDSS_BHS_ON BIT(21)
> #define QDSS_LDO_BYP BIT(22)
>
> +/* QDSP6v55 parameters */
> +#define QDSP6v55_LDO_BYP BIT(25)
> +#define QDSP6v55_BHS_ON BIT(24)
> +#define QDSP6v55_CLAMP_WL BIT(21)
> +#define QDSP6v55_CLAMP_QMC_MEM BIT(22)
> +
> +#define HALT_CHECK_MAX_LOOPS (200)
> +#define QDSP6SS_XO_CBCR (0x0038)
> +
> +#define QDSP6SS_ACC_OVERRIDE_VAL 0x20
> +
> struct q6v5 {
> struct device *dev;
> struct rproc *rproc;
>
> void __iomem *reg_base;
> void __iomem *rmb_base;
> -
> + void __iomem *restart_reg;
The restart_reg is a register in the gcc, on 8974 this is exposed as a
reset by gcc. Please add the GCC_MSS_RESTART to the list of resets in
gcc-msm8996 rather than remapping and poking the register directly from
this driver.
> struct regmap *halt_map;
> u32 halt_q6;
> u32 halt_modem;
> @@ -115,6 +129,13 @@ struct q6v5 {
> struct clk *ahb_clk;
> struct clk *axi_clk;
> struct clk *rom_clk;
> + struct clk *gpll0_mss_clk;
> + struct clk *snoc_axi_clk;
> + struct clk *mnoc_axi_clk;
> +
> + struct clk *xo;
> + struct clk *pnoc_clk;
> + struct clk *qdss_clk;
Please introduce these changes as they are needed by the implementation,
rather than in a separate patch. It makes it much much easier to review.
>
> struct completion start_done;
> struct completion stop_done;
> @@ -128,13 +149,18 @@ struct q6v5 {
> phys_addr_t mpss_reloc;
> void *mpss_region;
> size_t mpss_size;
> + struct mutex q6_lock;
> + u32 boot_count;
> + bool unvote_flag;
> + bool is_q6v55;
> + bool ahb_clk_vote;
Dito
> };
>
> enum {
> Q6V5_SUPPLY_CX,
> Q6V5_SUPPLY_MX,
> - Q6V5_SUPPLY_MSS,
> Q6V5_SUPPLY_PLL,
> + Q6V5_SUPPLY_MSS,
> };
>
> static int q6v5_regulator_init(struct q6v5 *qproc)
> @@ -892,6 +918,7 @@ static int q6v5_remove(struct platform_device *pdev)
>
> static const struct of_device_id q6v5_of_match[] = {
> { .compatible = "qcom,q6v5-pil", },
> + { .compatible = "qcom,q6v55-pil", },
Just out of curiosity, is the version 55 or 5.5?
> { },
> };
Regards,
Bjorn
next prev parent reply other threads:[~2016-10-25 18:47 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-10-24 15:55 [PATCH 0/5] Self authenticating hexagon driver for q6v55 Avaneesh Kumar Dwivedi
2016-10-24 15:55 ` [PATCH 1/5] remoteproc: Add q6v55 specific parameters and enable probing " Avaneesh Kumar Dwivedi
2016-10-25 18:47 ` Bjorn Andersson [this message]
2016-11-04 13:27 ` Avaneesh Kumar Dwivedi
2016-11-08 5:28 ` Bjorn Andersson
2016-10-24 15:55 ` [PATCH 2/5] remoteproc: Adding q6v55 specific regulator, clk, reset interface Avaneesh Kumar Dwivedi
2016-10-25 19:05 ` Bjorn Andersson
2016-11-04 13:41 ` Avaneesh Kumar Dwivedi
2016-10-24 15:55 ` [PATCH 3/5] remoteproc: Adding reset sequence and halt seq changes for q6v55 Avaneesh Kumar Dwivedi
2016-10-25 19:15 ` Bjorn Andersson
2016-11-04 13:42 ` Avaneesh Kumar Dwivedi
2016-10-24 15:55 ` [PATCH 4/5] remoteproc: Add start and shutdown interface " Avaneesh Kumar Dwivedi
2016-10-25 19:27 ` Bjorn Andersson
2016-11-04 13:46 ` Avaneesh Kumar Dwivedi
2016-10-24 15:55 ` [PATCH 5/5] remoteproc: Modifying probe for initializing q6v55 specific resources Avaneesh Kumar Dwivedi
2016-10-25 19:35 ` Bjorn Andersson
2016-11-04 13:47 ` Avaneesh Kumar Dwivedi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20161025184708.GM7509@tuxbot \
--to=bjorn.andersson@linaro.org \
--cc=akdwived@codeaurora.org \
--cc=kaushalk@codeaurora.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-remoteproc@vger.kernel.org \
--cc=spjoshi@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).