linux-arm-msm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Lina Iyer <ilina@codeaurora.org>
To: andy.gross@linaro.org, david.brown@linaro.org,
	linux-arm-msm@vger.kernel.org, linux-soc@vger.kernel.org
Cc: rnayak@codeaurora.org, bjorn.andersson@linaro.org,
	linux-kernel@vger.kernel.org, sboyd@kernel.org,
	evgreen@chromium.org, dianders@chromium.org,
	Lina Iyer <ilina@codeaurora.org>
Subject: [PATCH v5 04/10] drivers: qcom: rpmh: add RPMH helper functions
Date: Thu,  5 Apr 2018 10:18:28 -0600	[thread overview]
Message-ID: <20180405161834.3850-5-ilina@codeaurora.org> (raw)
In-Reply-To: <20180405161834.3850-1-ilina@codeaurora.org>

Sending RPMH requests and waiting for response from the controller
through a callback is common functionality across all platform drivers.
To simplify drivers, add a library functions to create RPMH client and
send resource state requests.

rpmh_write() is a synchronous blocking call that can be used to send
active state requests.

Signed-off-by: Lina Iyer <ilina@codeaurora.org>
---

Changes in v4:
	- use const struct tcs_cmd in API
	- remove wait count from this patch
	- changed -EFAULT to -EINVAL
---
 drivers/soc/qcom/Makefile        |   4 +-
 drivers/soc/qcom/rpmh-internal.h |   2 +
 drivers/soc/qcom/rpmh-rsc.c      |   7 ++
 drivers/soc/qcom/rpmh.c          | 253 +++++++++++++++++++++++++++++++++++++++
 include/soc/qcom/rpmh.h          |  34 ++++++
 5 files changed, 299 insertions(+), 1 deletion(-)
 create mode 100644 drivers/soc/qcom/rpmh.c
 create mode 100644 include/soc/qcom/rpmh.h

diff --git a/drivers/soc/qcom/Makefile b/drivers/soc/qcom/Makefile
index cb6300f6a8e9..bb395c3202ca 100644
--- a/drivers/soc/qcom/Makefile
+++ b/drivers/soc/qcom/Makefile
@@ -7,7 +7,9 @@ obj-$(CONFIG_QCOM_PM)	+=	spm.o
 obj-$(CONFIG_QCOM_QMI_HELPERS)	+= qmi_helpers.o
 qmi_helpers-y	+= qmi_encdec.o qmi_interface.o
 obj-$(CONFIG_QCOM_RMTFS_MEM)	+= rmtfs_mem.o
-obj-$(CONFIG_QCOM_RPMH)	+=	rpmh-rsc.o
+obj-$(CONFIG_QCOM_RPMH)		+= qcom_rpmh.o
+qcom_rpmh-y			+= rpmh-rsc.o
+qcom_rpmh-y			+= rpmh.o
 obj-$(CONFIG_QCOM_SMD_RPM)	+= smd-rpm.o
 obj-$(CONFIG_QCOM_SMEM) +=	smem.o
 obj-$(CONFIG_QCOM_SMEM_STATE) += smem_state.o
diff --git a/drivers/soc/qcom/rpmh-internal.h b/drivers/soc/qcom/rpmh-internal.h
index aa73ec4b3e42..125f9faec536 100644
--- a/drivers/soc/qcom/rpmh-internal.h
+++ b/drivers/soc/qcom/rpmh-internal.h
@@ -86,4 +86,6 @@ struct rsc_drv {
 
 int rpmh_rsc_send_data(struct rsc_drv *drv, const struct tcs_request *msg);
 
+void rpmh_tx_done(const struct tcs_request *msg, int r);
+
 #endif /* __RPM_INTERNAL_H__ */
diff --git a/drivers/soc/qcom/rpmh-rsc.c b/drivers/soc/qcom/rpmh-rsc.c
index f604101a4fc2..c5cde917dba6 100644
--- a/drivers/soc/qcom/rpmh-rsc.c
+++ b/drivers/soc/qcom/rpmh-rsc.c
@@ -252,6 +252,8 @@ static void tcs_notify_tx_done(unsigned long data)
 	struct rsc_drv *drv = (struct rsc_drv *)data;
 	struct tcs_response *resp;
 	unsigned long flags;
+	const struct tcs_request *msg;
+	int err;
 
 	for (;;) {
 		spin_lock_irqsave(&drv->drv_lock, flags);
@@ -264,7 +266,10 @@ static void tcs_notify_tx_done(unsigned long data)
 		list_del(&resp->list);
 		spin_unlock_irqrestore(&drv->drv_lock, flags);
 		trace_rpmh_notify_tx_done(drv, resp);
+		msg = resp->msg;
+		err = resp->err;
 		free_response(resp);
+		rpmh_tx_done(msg, err);
 	}
 }
 
@@ -554,6 +559,8 @@ static int rpmh_rsc_probe(struct platform_device *pdev)
 	/* Enable the active TCS to send requests immediately */
 	write_tcs_reg(drv, RSC_DRV_IRQ_ENABLE, 0, 0, drv->tcs[ACTIVE_TCS].mask);
 
+	dev_set_drvdata(&pdev->dev, drv);
+
 	return devm_of_platform_populate(&pdev->dev);
 }
 
diff --git a/drivers/soc/qcom/rpmh.c b/drivers/soc/qcom/rpmh.c
new file mode 100644
index 000000000000..e3c7491e7baf
--- /dev/null
+++ b/drivers/soc/qcom/rpmh.c
@@ -0,0 +1,253 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2016-2018, The Linux Foundation. All rights reserved.
+ */
+
+#include <linux/atomic.h>
+#include <linux/interrupt.h>
+#include <linux/jiffies.h>
+#include <linux/kernel.h>
+#include <linux/mailbox_client.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <linux/wait.h>
+
+#include <soc/qcom/rpmh.h>
+
+#include "rpmh-internal.h"
+
+#define RPMH_MAX_MBOXES			2
+#define RPMH_TIMEOUT_MS			10000
+
+#define DEFINE_RPMH_MSG_ONSTACK(rc, s, q, name)		\
+	struct rpmh_request name = {			\
+		.msg = {				\
+			.state = s,			\
+			.cmds = name.cmd,		\
+			.num_cmds = 0,			\
+			.wait_for_compl = true,		\
+		},					\
+		.cmd = { { 0 } },			\
+		.completion = q,			\
+		.rc = rc,				\
+	}
+
+/**
+ * struct rpmh_request: the message to be sent to rpmh-rsc
+ *
+ * @msg: the request
+ * @cmd: the payload that will be part of the @msg
+ * @completion: triggered when request is done
+ * @err: err return from the controller
+ */
+struct rpmh_request {
+	struct tcs_request msg;
+	struct tcs_cmd cmd[MAX_RPMH_PAYLOAD];
+	struct completion *completion;
+	struct rpmh_client *rc;
+	int err;
+};
+
+/**
+ * struct rpmh_ctrlr: our representation of the controller
+ *
+ * @drv: the controller instance
+ */
+struct rpmh_ctrlr {
+	struct rsc_drv *drv;
+};
+
+/**
+ * struct rpmh_client: the client object
+ *
+ * @dev: the platform device that is the owner
+ * @ctrlr: the controller associated with this client.
+ */
+struct rpmh_client {
+	struct device *dev;
+	struct rpmh_ctrlr *ctrlr;
+};
+
+static struct rpmh_ctrlr rpmh_rsc[RPMH_MAX_MBOXES];
+static DEFINE_MUTEX(rpmh_ctrlr_mutex);
+
+void rpmh_tx_done(const struct tcs_request *msg, int r)
+{
+	struct rpmh_request *rpm_msg = container_of(msg, struct rpmh_request,
+						    msg);
+	struct completion *compl = rpm_msg->completion;
+
+	rpm_msg->err = r;
+
+	if (r)
+		dev_err(rpm_msg->rc->dev,
+			"RPMH TX fail in msg addr=%#x, err=%d\n",
+			rpm_msg->msg.cmds[0].addr, r);
+
+	/* Signal the blocking thread we are done */
+	if (compl)
+		complete(compl);
+}
+EXPORT_SYMBOL(rpmh_tx_done);
+
+/**
+ * wait_for_tx_done: Wait until the response is received.
+ *
+ * @rc: The RPMH client
+ * @compl: The completion object
+ * @addr: An addr that we sent in that request
+ * @data: The data for the address in that request
+ */
+static int wait_for_tx_done(struct rpmh_client *rc,
+			    struct completion *compl, u32 addr, u32 data)
+{
+	int ret;
+
+	might_sleep();
+
+	ret = wait_for_completion_timeout(compl,
+					  msecs_to_jiffies(RPMH_TIMEOUT_MS));
+	if (ret)
+		dev_dbg(rc->dev,
+			"RPMH response received addr=%#x data=%#x\n",
+			addr, data);
+	else
+		dev_err(rc->dev,
+			"RPMH response timeout addr=%#x data=%#x\n",
+			addr, data);
+
+	return (ret > 0) ? 0 : -ETIMEDOUT;
+}
+
+/**
+ * __rpmh_write: send the RPMH request
+ *
+ * @rc: The RPMH client
+ * @state: Active/Sleep request type
+ * @rpm_msg: The data that needs to be sent (cmds).
+ */
+static int __rpmh_write(struct rpmh_client *rc, enum rpmh_state state,
+			struct rpmh_request *rpm_msg)
+{
+	int ret = -EINVAL;
+
+	rpm_msg->msg.state = state;
+
+	if (state == RPMH_ACTIVE_ONLY_STATE) {
+		WARN_ON(irqs_disabled());
+		ret = rpmh_rsc_send_data(rc->ctrlr->drv, &rpm_msg->msg);
+		if (!ret)
+			dev_dbg(rc->dev,
+				"RPMH request sent addr=%#x, data=%i#x\n",
+				rpm_msg->msg.cmds[0].addr,
+				rpm_msg->msg.cmds[0].data);
+		else
+			dev_warn(rc->dev,
+				 "Error in RPMH request addr=%#x, data=%#x\n",
+				 rpm_msg->msg.cmds[0].addr,
+				 rpm_msg->msg.cmds[0].data);
+	}
+
+	return ret;
+}
+
+/**
+ * rpmh_write: Write a set of RPMH commands and block until response
+ *
+ * @rc: The RPMh handle got from rpmh_get_client
+ * @state: Active/sleep set
+ * @cmd: The payload data
+ * @n: The number of elements in @cmd
+ *
+ * May sleep. Do not call from atomic contexts.
+ */
+int rpmh_write(struct rpmh_client *rc, enum rpmh_state state,
+	       const struct tcs_cmd *cmd, u32 n)
+{
+	DECLARE_COMPLETION_ONSTACK(compl);
+	DEFINE_RPMH_MSG_ONSTACK(rc, state, &compl, rpm_msg);
+	int ret;
+
+	if (IS_ERR_OR_NULL(rc) || !cmd || !n || n > MAX_RPMH_PAYLOAD)
+		return -EINVAL;
+
+	memcpy(rpm_msg.cmd, cmd, n * sizeof(*cmd));
+	rpm_msg.msg.num_cmds = n;
+
+	ret = __rpmh_write(rc, state, &rpm_msg);
+	if (ret)
+		return ret;
+
+	return wait_for_tx_done(rc, &compl, cmd[0].addr, cmd[0].data);
+}
+EXPORT_SYMBOL(rpmh_write);
+
+static struct rpmh_ctrlr *get_rpmh_ctrlr(struct platform_device *pdev)
+{
+	int i;
+	struct rsc_drv *drv = dev_get_drvdata(pdev->dev.parent);
+	struct rpmh_ctrlr *ctrlr = ERR_PTR(-EINVAL);
+
+	if (!drv)
+		return ctrlr;
+
+	mutex_lock(&rpmh_ctrlr_mutex);
+	for (i = 0; i < RPMH_MAX_MBOXES; i++) {
+		if (rpmh_rsc[i].drv == drv) {
+			ctrlr = &rpmh_rsc[i];
+			goto unlock;
+		}
+	}
+
+	for (i = 0; i < RPMH_MAX_MBOXES; i++) {
+		if (rpmh_rsc[i].drv == NULL) {
+			ctrlr = &rpmh_rsc[i];
+			ctrlr->drv = drv;
+			break;
+		}
+	}
+	WARN_ON(i == RPMH_MAX_MBOXES);
+unlock:
+	mutex_unlock(&rpmh_ctrlr_mutex);
+	return ctrlr;
+}
+
+/**
+ * rpmh_get_client: Get the RPMh handle
+ *
+ * @pdev: the platform device which needs to communicate with RPM
+ * accelerators
+ * May sleep.
+ */
+struct rpmh_client *rpmh_get_client(struct platform_device *pdev)
+{
+	struct rpmh_client *rc;
+
+	rc = kzalloc(sizeof(*rc), GFP_KERNEL);
+	if (!rc)
+		return ERR_PTR(-ENOMEM);
+
+	rc->dev = &pdev->dev;
+	rc->ctrlr = get_rpmh_ctrlr(pdev);
+	if (IS_ERR(rc->ctrlr)) {
+		kfree(rc);
+		return ERR_PTR(-EINVAL);
+	}
+
+	return rc;
+}
+EXPORT_SYMBOL(rpmh_get_client);
+
+/**
+ * rpmh_release: Release the RPMH client
+ *
+ * @rc: The RPMh handle to be freed.
+ */
+void rpmh_release(struct rpmh_client *rc)
+{
+	kfree(rc);
+}
+EXPORT_SYMBOL(rpmh_release);
diff --git a/include/soc/qcom/rpmh.h b/include/soc/qcom/rpmh.h
new file mode 100644
index 000000000000..95334d4c1ede
--- /dev/null
+++ b/include/soc/qcom/rpmh.h
@@ -0,0 +1,34 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2016-2018, The Linux Foundation. All rights reserved.
+ */
+
+#ifndef __SOC_QCOM_RPMH_H__
+#define __SOC_QCOM_RPMH_H__
+
+#include <soc/qcom/tcs.h>
+#include <linux/platform_device.h>
+
+struct rpmh_client;
+
+#if IS_ENABLED(CONFIG_QCOM_RPMH)
+int rpmh_write(struct rpmh_client *rc, enum rpmh_state state,
+	       const struct tcs_cmd *cmd, u32 n);
+
+struct rpmh_client *rpmh_get_client(struct platform_device *pdev);
+
+void rpmh_release(struct rpmh_client *rc);
+
+#else
+
+static inline int rpmh_write(struct rpmh_client *rc, enum rpmh_state state,
+			     const struct tcs_cmd *cmd, u32 n)
+{ return -ENODEV; }
+
+static inline struct rpmh_client *rpmh_get_client(struct platform_device *pdev)
+{ return ERR_PTR(-ENODEV); }
+
+static inline void rpmh_release(struct rpmh_client *rc) { }
+#endif /* CONFIG_QCOM_RPMH */
+
+#endif /* __SOC_QCOM_RPMH_H__ */
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

  parent reply	other threads:[~2018-04-05 16:18 UTC|newest]

Thread overview: 37+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-04-05 16:18 [PATCH v5 00/10] drivers/qcom: add RPMH communication suppor Lina Iyer
2018-04-05 16:18 ` [PATCH v5 01/10] drivers: qcom: rpmh-rsc: add RPMH controller for QCOM SoCs Lina Iyer
2018-04-10 23:40   ` Bjorn Andersson
2018-04-13 16:16     ` Lina Iyer
     [not found]   ` <152342153642.180276.4927130412537860735@swboyd.mtv.corp.google.com>
2018-04-13 15:37     ` Lina Iyer
2018-04-13 17:43       ` Stephen Boyd
2018-04-16 19:51         ` Lina Iyer
2018-04-05 16:18 ` [PATCH v5 02/10] dt-bindings: introduce RPMH RSC bindings for Qualcomm SoCs Lina Iyer
2018-04-07  1:14   ` Stephen Boyd
2018-04-09 16:08     ` Lina Iyer
2018-04-10 19:36       ` Bjorn Andersson
2018-04-11 21:26         ` Lina Iyer
2018-04-11 15:29       ` Stephen Boyd
2018-04-11 21:24         ` Lina Iyer
2018-04-13 22:40           ` Stephen Boyd
2018-04-16 16:08             ` Lina Iyer
2018-04-17  6:01               ` Stephen Boyd
2018-04-18 19:31                 ` Lina Iyer
2018-04-05 16:18 ` [PATCH v5 03/10] drivers: qcom: rpmh-rsc: log RPMH requests in FTRACE Lina Iyer
2018-04-05 18:32   ` Steven Rostedt
2018-04-05 16:18 ` Lina Iyer [this message]
2018-04-07  1:21   ` [PATCH v5 04/10] drivers: qcom: rpmh: add RPMH helper functions Stephen Boyd
2018-04-09 15:36     ` Lina Iyer
2018-04-11  2:23       ` Stephen Boyd
2018-04-11 16:34         ` Lina Iyer
2018-04-11  0:01   ` Bjorn Andersson
2018-04-13 17:18     ` Stephen Boyd
2018-04-05 16:18 ` [PATCH v5 05/10] drivers: qcom: rpmh-rsc: write sleep/wake requests to TCS Lina Iyer
2018-04-11  0:31   ` Bjorn Andersson
2018-04-11 16:33     ` Lina Iyer
2018-04-05 16:18 ` [PATCH v5 06/10] drivers: qcom: rpmh-rsc: allow invalidation of sleep/wake TCS Lina Iyer
2018-04-05 16:18 ` [PATCH v5 07/10] drivers: qcom: rpmh: cache sleep/wake state requests Lina Iyer
2018-04-19  6:12   ` Stephen Boyd
2018-04-19 15:06     ` Lina Iyer
2018-04-05 16:18 ` [PATCH v5 08/10] drivers: qcom: rpmh: allow requests to be sent asynchronously Lina Iyer
2018-04-05 16:18 ` [PATCH v5 09/10] drivers: qcom: rpmh: add support for batch RPMH request Lina Iyer
2018-04-05 16:18 ` [PATCH v5 10/10] drivers: qcom: rpmh-rsc: allow active requests from wake TCS Lina Iyer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180405161834.3850-5-ilina@codeaurora.org \
    --to=ilina@codeaurora.org \
    --cc=andy.gross@linaro.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=david.brown@linaro.org \
    --cc=dianders@chromium.org \
    --cc=evgreen@chromium.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-soc@vger.kernel.org \
    --cc=rnayak@codeaurora.org \
    --cc=sboyd@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).