From mboxrd@z Thu Jan 1 00:00:00 1970 From: srinivas.kandagatla@linaro.org Subject: [PATCH] arm64: msm8916: fix gic_irq_domain_translate warnings Date: Wed, 18 Apr 2018 17:34:15 +0100 Message-ID: <20180418163415.21646-1-srinivas.kandagatla@linaro.org> Return-path: Sender: linux-kernel-owner@vger.kernel.org To: andy.gross@linaro.org, linux-arm-msm@vger.kernel.org Cc: david.brown@linaro.org, robh+dt@kernel.org, linux-soc@vger.kernel.org, linux-kernel@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, Srinivas Kandagatla List-Id: linux-arm-msm@vger.kernel.org From: Srinivas Kandagatla Remove the usage of IRQ_TYPE_NONE to fix loud warnings from patch (83a86fbb5b56b "irqchip/gic: Loudly complain about the use of IRQ_TYPE_NONE"). Signed-off-by: Srinivas Kandagatla --- arch/arm64/boot/dts/qcom/msm8916.dtsi | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi index cfbd72186762..5d66a575c7e1 100644 --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi @@ -180,7 +180,7 @@ pmu { compatible = "arm,cortex-a53-pmu"; - interrupts = ; + interrupts = ; }; thermal-zones { @@ -513,7 +513,7 @@ blsp_i2c2: i2c@78b6000 { compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x078b6000 0x500>; - interrupts = ; + interrupts = ; clocks = <&gcc GCC_BLSP1_AHB_CLK>, <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>; clock-names = "iface", "core"; @@ -528,7 +528,7 @@ blsp_i2c4: i2c@78b8000 { compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x078b8000 0x500>; - interrupts = ; + interrupts = ; clocks = <&gcc GCC_BLSP1_AHB_CLK>, <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>; clock-names = "iface", "core"; @@ -543,7 +543,7 @@ blsp_i2c6: i2c@78ba000 { compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x078ba000 0x500>; - interrupts = ; + interrupts = ; clocks = <&gcc GCC_BLSP1_AHB_CLK>, <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>; clock-names = "iface", "core"; @@ -575,7 +575,7 @@ "mi2s-bit-clk3"; #sound-dai-cells = <1>; - interrupts = <0 160 0>; + interrupts = <0 160 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "lpass-irq-lpaif"; reg = <0x07708000 0x10000>; reg-names = "lpass-lpaif"; @@ -595,7 +595,7 @@ reg = <0x07824900 0x11c>, <0x07824000 0x800>; reg-names = "hc_mem", "core_mem"; - interrupts = <0 123 0>, <0 138 0>; + interrupts = <0 123 IRQ_TYPE_LEVEL_HIGH>, <0 138 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "hc_irq", "pwr_irq"; clocks = <&gcc GCC_SDCC1_APPS_CLK>, <&gcc GCC_SDCC1_AHB_CLK>, @@ -612,7 +612,7 @@ reg = <0x07864900 0x11c>, <0x07864000 0x800>; reg-names = "hc_mem", "core_mem"; - interrupts = <0 125 0>, <0 221 0>; + interrupts = <0 125 IRQ_TYPE_LEVEL_HIGH>, <0 221 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "hc_irq", "pwr_irq"; clocks = <&gcc GCC_SDCC2_APPS_CLK>, <&gcc GCC_SDCC2_AHB_CLK>, @@ -819,7 +819,7 @@ iommu-ctx@2000 { compatible = "qcom,msm-iommu-v1-ns"; reg = <0x2000 0x1000>; - interrupts = ; + interrupts = ; }; }; @@ -864,7 +864,7 @@ "bus_clk", "vsync_clk"; - interrupts = <0 72 0>; + interrupts = <0 72 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; #interrupt-cells = <1>; -- 2.16.2