Linux-ARM-MSM Archive on lore.kernel.org
 help / color / Atom feed
From: "Raju P.L.S.S.S.N" <rplsssn@codeaurora.org>
To: andy.gross@linaro.org, david.brown@linaro.org,
	linux-arm-msm@vger.kernel.org, linux-soc@vger.kernel.org
Cc: rnayak@codeaurora.org, bjorn.andersson@linaro.org,
	linux-kernel@vger.kernel.org, linux-pm@vger.kernel.org,
	sboyd@kernel.org, evgreen@chromium.org, dianders@chromium.org,
	mka@chromium.org, ilina@codeaurora.org,
	"Raju P . L . S . S . S . N" <rplsssn@codeaurora.org>
Subject: [PATCH RESEND v1 2/2] drivers: qcom: rpmh: write PDC data
Date: Mon, 18 Feb 2019 19:32:10 +0530
Message-ID: <20190218140210.14631-3-rplsssn@codeaurora.org> (raw)
In-Reply-To: <20190218140210.14631-1-rplsssn@codeaurora.org>

From: Lina Iyer <ilina@codeaurora.org>

The Power Domain Controller can be programmed to wakeup the RSC and
setup the resources back in the active state, before the processor is
woken up by a timer interrupt. The wakeup value from the timer hardware
can be copied to the PDC which has its own timer and is in an always-on
power domain. Programming the wakeup value is done through a separate
register on the RSC.

Signed-off-by: Lina Iyer <ilina@codeaurora.org>
Signed-off-by: Raju P.L.S.S.S.N <rplsssn@codeaurora.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
---
 drivers/soc/qcom/rpmh-internal.h |  4 +++-
 drivers/soc/qcom/rpmh-rsc.c      | 35 ++++++++++++++++++++++++++------
 drivers/soc/qcom/rpmh.c          | 28 +++++++++++++++++++++++++
 include/soc/qcom/rpmh.h          |  7 +++++++
 4 files changed, 67 insertions(+), 7 deletions(-)

diff --git a/drivers/soc/qcom/rpmh-internal.h b/drivers/soc/qcom/rpmh-internal.h
index a7bbbb67991c..8c316b4d36dc 100644
--- a/drivers/soc/qcom/rpmh-internal.h
+++ b/drivers/soc/qcom/rpmh-internal.h
@@ -85,6 +85,7 @@ struct rpmh_ctrlr {
  * Resource State Coordinator controller (RSC)
  *
  * @name:       controller identifier
+ * @base:       start address of the RSC's DRV registers
  * @tcs_base:   start address of the TCS registers in this controller
  * @id:         instance id in the controller (Direct Resource Voter)
  * @num_tcs:    number of TCSes in this DRV
@@ -95,6 +96,7 @@ struct rpmh_ctrlr {
  */
 struct rsc_drv {
 	const char *name;
+	void __iomem *base;
 	void __iomem *tcs_base;
 	int id;
 	int num_tcs;
@@ -108,7 +110,7 @@ int rpmh_rsc_send_data(struct rsc_drv *drv, const struct tcs_request *msg);
 int rpmh_rsc_write_ctrl_data(struct rsc_drv *drv,
 			     const struct tcs_request *msg);
 int rpmh_rsc_invalidate(struct rsc_drv *drv);
-
+int rpmh_rsc_write_pdc_data(struct rsc_drv *drv, const struct tcs_request *msg);
 void rpmh_tx_done(const struct tcs_request *msg, int r);
 
 #endif /* __RPM_INTERNAL_H__ */
diff --git a/drivers/soc/qcom/rpmh-rsc.c b/drivers/soc/qcom/rpmh-rsc.c
index 6cc7f219ce48..73d5b9802a29 100644
--- a/drivers/soc/qcom/rpmh-rsc.c
+++ b/drivers/soc/qcom/rpmh-rsc.c
@@ -61,6 +61,11 @@
 #define CMD_STATUS_ISSUED		BIT(8)
 #define CMD_STATUS_COMPL		BIT(16)
 
+/* PDC wakeup */
+#define RSC_PDC_DATA_SIZE		2
+#define RSC_PDC_DRV_DATA		0x38
+#define RSC_PDC_DATA_OFFSET		0x08
+
 static u32 read_tcs_reg(struct rsc_drv *drv, int reg, int tcs_id, int cmd_id)
 {
 	return readl_relaxed(drv->tcs_base + reg + RSC_DRV_TCS_OFFSET * tcs_id +
@@ -552,6 +557,25 @@ int rpmh_rsc_write_ctrl_data(struct rsc_drv *drv, const struct tcs_request *msg)
 	return tcs_ctrl_write(drv, msg);
 }
 
+int rpmh_rsc_write_pdc_data(struct rsc_drv *drv, const struct tcs_request *msg)
+{
+	int i;
+	void __iomem *addr = drv->base + RSC_PDC_DRV_DATA;
+
+	if (!msg || !msg->cmds || msg->num_cmds != RSC_PDC_DATA_SIZE)
+		return -EINVAL;
+
+	for (i = 0; i < msg->num_cmds; i++) {
+		/* Only data is write capable */
+		writel_relaxed(msg->cmds[i].data, addr);
+		trace_rpmh_send_msg(drv, RSC_PDC_DRV_DATA, i, 0,
+				    &msg->cmds[i]);
+		addr += RSC_PDC_DATA_OFFSET;
+	}
+
+	return 0;
+}
+
 static int rpmh_probe_tcs_config(struct platform_device *pdev,
 				 struct rsc_drv *drv)
 {
@@ -564,21 +588,20 @@ static int rpmh_probe_tcs_config(struct platform_device *pdev,
 	int i, ret, n, st = 0;
 	struct tcs_group *tcs;
 	struct resource *res;
-	void __iomem *base;
 	char drv_id[10] = {0};
 
 	snprintf(drv_id, ARRAY_SIZE(drv_id), "drv-%d", drv->id);
 	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, drv_id);
-	base = devm_ioremap_resource(&pdev->dev, res);
-	if (IS_ERR(base))
-		return PTR_ERR(base);
+	drv->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(drv->base))
+		return PTR_ERR(drv->base);
 
 	ret = of_property_read_u32(dn, "qcom,tcs-offset", &offset);
 	if (ret)
 		return ret;
-	drv->tcs_base = base + offset;
+	drv->tcs_base = drv->base + offset;
 
-	config = readl_relaxed(base + DRV_PRNT_CHLD_CONFIG);
+	config = readl_relaxed(drv->base + DRV_PRNT_CHLD_CONFIG);
 
 	max_tcs = config;
 	max_tcs &= DRV_NUM_TCS_MASK << (DRV_NUM_TCS_SHIFT * drv->id);
diff --git a/drivers/soc/qcom/rpmh.c b/drivers/soc/qcom/rpmh.c
index c7beb6841289..71a76eaa4b63 100644
--- a/drivers/soc/qcom/rpmh.c
+++ b/drivers/soc/qcom/rpmh.c
@@ -413,6 +413,34 @@ int rpmh_write_batch(const struct device *dev, enum rpmh_state state,
 }
 EXPORT_SYMBOL(rpmh_write_batch);
 
+/**
+ * rpmh_write_pdc_data: Write PDC data to the controller
+ *
+ * @dev: the device making the request
+ * @cmd: The payload data
+ * @n: The number of elements in payload
+ *
+ * Write PDC data to the controller. The messages are always sent async.
+ *
+ * May be called from atomic contexts.
+ */
+int rpmh_write_pdc_data(const struct device *dev,
+			const struct tcs_cmd *cmd, u32 n)
+{
+	DEFINE_RPMH_MSG_ONSTACK(dev, 0, NULL, rpm_msg);
+	struct rpmh_ctrlr *ctrlr = get_rpmh_ctrlr(dev);
+
+	if (!n || n > MAX_RPMH_PAYLOAD)
+		return -EINVAL;
+
+	memcpy(rpm_msg.cmd, cmd, n * sizeof(*cmd));
+	rpm_msg.msg.num_cmds = n;
+	rpm_msg.msg.wait_for_compl = false;
+
+	return rpmh_rsc_write_pdc_data(ctrlr_to_drv(ctrlr), &rpm_msg.msg);
+}
+EXPORT_SYMBOL(rpmh_write_pdc_data);
+
 static int is_req_valid(struct cache_req *req)
 {
 	return (req->sleep_val != UINT_MAX &&
diff --git a/include/soc/qcom/rpmh.h b/include/soc/qcom/rpmh.h
index 619e07c75da9..b05e31aaf047 100644
--- a/include/soc/qcom/rpmh.h
+++ b/include/soc/qcom/rpmh.h
@@ -24,6 +24,9 @@ int rpmh_flush(const struct device *dev);
 
 int rpmh_invalidate(const struct device *dev);
 
+int rpmh_write_pdc_data(const struct device *dev,
+			const struct tcs_cmd *cmd, u32 n);
+
 #else
 
 static inline int rpmh_write(const struct device *dev, enum rpmh_state state,
@@ -46,6 +49,10 @@ static inline int rpmh_flush(const struct device *dev)
 static inline int rpmh_invalidate(const struct device *dev)
 { return -ENODEV; }
 
+static inline int rpmh_write_pdc_data(const struct device *dev,
+				      const struct tcs_cmd *cmd, u32 n)
+{ return -ENODEV; }
+
 #endif /* CONFIG_QCOM_RPMH */
 
 #endif /* __SOC_QCOM_RPMH_H__ */
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of the Code Aurora Forum, hosted by The Linux Foundation.

      parent reply index

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-02-18 14:02 [PATCH RESEND v1 0/2] drivers/qcom: add additional functionality to RPMH Raju P.L.S.S.S.N
2019-02-18 14:02 ` [PATCH RESEND v1 1/2] drivers: qcom: rpmh-rsc: clear active mode configuration for wake TCS Raju P.L.S.S.S.N
2020-03-26 18:07   ` Doug Anderson
2019-02-18 14:02 ` Raju P.L.S.S.S.N [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190218140210.14631-3-rplsssn@codeaurora.org \
    --to=rplsssn@codeaurora.org \
    --cc=andy.gross@linaro.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=david.brown@linaro.org \
    --cc=dianders@chromium.org \
    --cc=evgreen@chromium.org \
    --cc=ilina@codeaurora.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=linux-soc@vger.kernel.org \
    --cc=mka@chromium.org \
    --cc=rnayak@codeaurora.org \
    --cc=sboyd@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-ARM-MSM Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-arm-msm/0 linux-arm-msm/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-arm-msm linux-arm-msm/ https://lore.kernel.org/linux-arm-msm \
		linux-arm-msm@vger.kernel.org
	public-inbox-index linux-arm-msm

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-arm-msm


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git