linux-arm-msm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Rajendra Nayak <rnayak@codeaurora.org>
To: linux-kernel@vger.kernel.org
Cc: ulf.hansson@linaro.org, Rajendra Nayak <rnayak@codeaurora.org>,
	linux-scsi@vger.kernel.org, linux-pm@vger.kernel.org,
	linux-arm-msm@vger.kernel.org, rafael@kernel.org,
	dianders@chromium.org, dri-devel@lists.freedesktop.org,
	linux-spi@vger.kernel.org, linux-serial@vger.kernel.org,
	viresh.kumar@linaro.org, swboyd@chromium.org
Subject: [RFC v2 10/11] drm/msm: dsi: Use OPP API to set clk/perf state
Date: Wed, 20 Mar 2019 15:19:17 +0530	[thread overview]
Message-ID: <20190320094918.20234-11-rnayak@codeaurora.org> (raw)
In-Reply-To: <20190320094918.20234-1-rnayak@codeaurora.org>

On SDM845 DSI needs to express a perforamnce state
requirement on a power domain depending on the clock rates.
Use OPP table from DT to register with OPP framework and use
dev_pm_opp_set_rate() to set the clk/perf state.

Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
---
 drivers/gpu/drm/msm/dsi/dsi.h      |  2 +
 drivers/gpu/drm/msm/dsi/dsi_cfg.c  |  4 +-
 drivers/gpu/drm/msm/dsi/dsi_host.c | 88 +++++++++++++++++++++++++++---
 3 files changed, 84 insertions(+), 10 deletions(-)

diff --git a/drivers/gpu/drm/msm/dsi/dsi.h b/drivers/gpu/drm/msm/dsi/dsi.h
index 9c6b31c2d79f..b4398a798370 100644
--- a/drivers/gpu/drm/msm/dsi/dsi.h
+++ b/drivers/gpu/drm/msm/dsi/dsi.h
@@ -188,8 +188,10 @@ int msm_dsi_runtime_suspend(struct device *dev);
 int msm_dsi_runtime_resume(struct device *dev);
 int dsi_link_clk_enable_6g(struct msm_dsi_host *msm_host);
 int dsi_link_clk_enable_v2(struct msm_dsi_host *msm_host);
+int dsi_link_clk_enable_6g_v2(struct msm_dsi_host *msm_host);
 void dsi_link_clk_disable_6g(struct msm_dsi_host *msm_host);
 void dsi_link_clk_disable_v2(struct msm_dsi_host *msm_host);
+void dsi_link_clk_disable_6g_v2(struct msm_dsi_host *msm_host);
 int dsi_tx_buf_alloc_6g(struct msm_dsi_host *msm_host, int size);
 int dsi_tx_buf_alloc_v2(struct msm_dsi_host *msm_host, int size);
 void *dsi_tx_buf_get_6g(struct msm_dsi_host *msm_host);
diff --git a/drivers/gpu/drm/msm/dsi/dsi_cfg.c b/drivers/gpu/drm/msm/dsi/dsi_cfg.c
index dcdfb1bb54f9..c18532f92e4a 100644
--- a/drivers/gpu/drm/msm/dsi/dsi_cfg.c
+++ b/drivers/gpu/drm/msm/dsi/dsi_cfg.c
@@ -159,8 +159,8 @@ const static struct msm_dsi_host_cfg_ops msm_dsi_6g_host_ops = {
 };
 
 const static struct msm_dsi_host_cfg_ops msm_dsi_6g_v2_host_ops = {
-	.link_clk_enable = dsi_link_clk_enable_6g,
-	.link_clk_disable = dsi_link_clk_disable_6g,
+	.link_clk_enable = dsi_link_clk_enable_6g_v2,
+	.link_clk_disable = dsi_link_clk_disable_6g_v2,
 	.clk_init_ver = dsi_clk_init_6g_v2,
 	.tx_buf_alloc = dsi_tx_buf_alloc_6g,
 	.tx_buf_get = dsi_tx_buf_get_6g,
diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c b/drivers/gpu/drm/msm/dsi/dsi_host.c
index 610183db1daf..6ed9e6a0520c 100644
--- a/drivers/gpu/drm/msm/dsi/dsi_host.c
+++ b/drivers/gpu/drm/msm/dsi/dsi_host.c
@@ -21,6 +21,7 @@
 #include <linux/of_gpio.h>
 #include <linux/of_irq.h>
 #include <linux/pinctrl/consumer.h>
+#include <linux/pm_opp.h>
 #include <linux/of_graph.h>
 #include <linux/regulator/consumer.h>
 #include <linux/spinlock.h>
@@ -511,7 +512,7 @@ int msm_dsi_runtime_resume(struct device *dev)
 	return dsi_bus_clk_enable(msm_host);
 }
 
-int dsi_link_clk_enable_6g(struct msm_dsi_host *msm_host)
+static int dsi_link_clk_set_rate_6g(struct msm_dsi_host *msm_host)
 {
 	int ret;
 
@@ -521,29 +522,65 @@ int dsi_link_clk_enable_6g(struct msm_dsi_host *msm_host)
 	ret = clk_set_rate(msm_host->byte_clk, msm_host->byte_clk_rate);
 	if (ret) {
 		pr_err("%s: Failed to set rate byte clk, %d\n", __func__, ret);
-		goto error;
+		return ret;
 	}
 
 	ret = clk_set_rate(msm_host->pixel_clk, msm_host->pixel_clk_rate);
 	if (ret) {
 		pr_err("%s: Failed to set rate pixel clk, %d\n", __func__, ret);
-		goto error;
+		return ret;
 	}
 
 	if (msm_host->byte_intf_clk) {
 		ret = clk_set_rate(msm_host->byte_intf_clk,
 				   msm_host->byte_clk_rate / 2);
-		if (ret) {
+		if (ret)
+			pr_err("%s: Failed to set rate byte intf clk, %d\n",
+			       __func__, ret);
+	}
+
+	return ret;
+}
+
+static int dsi_link_clk_set_rate_6g_v2(struct msm_dsi_host *msm_host)
+{
+	int ret;
+	struct device *dev = &msm_host->pdev->dev;
+
+	DBG("Set clk rates: pclk=%d, byteclk=%d",
+		msm_host->mode->clock, msm_host->byte_clk_rate);
+
+	ret = dev_pm_opp_set_rate(dev, msm_host->byte_clk_rate);
+	if (ret) {
+		pr_err("%s: dev_pm_opp_set_rate failed %d\n", __func__, ret);
+		return ret;
+	}
+
+	ret = clk_set_rate(msm_host->pixel_clk, msm_host->pixel_clk_rate);
+	if (ret) {
+		pr_err("%s: Failed to set rate pixel clk, %d\n", __func__, ret);
+		return ret;
+	}
+
+	if (msm_host->byte_intf_clk) {
+		ret = clk_set_rate(msm_host->byte_intf_clk,
+				msm_host->byte_clk_rate / 2);
+		if (ret)
 			pr_err("%s: Failed to set rate byte intf clk, %d\n",
 			       __func__, ret);
-			goto error;
-		}
 	}
 
+	return ret;
+}
+
+static int dsi_link_clk_prepare_enable_6g(struct msm_dsi_host *msm_host)
+{
+	int ret;
+
 	ret = clk_prepare_enable(msm_host->esc_clk);
 	if (ret) {
 		pr_err("%s: Failed to enable dsi esc clk\n", __func__);
-		goto error;
+		return ret;
 	}
 
 	ret = clk_prepare_enable(msm_host->byte_clk);
@@ -575,10 +612,31 @@ int dsi_link_clk_enable_6g(struct msm_dsi_host *msm_host)
 	clk_disable_unprepare(msm_host->byte_clk);
 byte_clk_err:
 	clk_disable_unprepare(msm_host->esc_clk);
-error:
 	return ret;
 }
 
+int dsi_link_clk_enable_6g(struct msm_dsi_host *msm_host)
+{
+	int ret;
+
+	ret = dsi_link_clk_set_rate_6g(msm_host);
+	if (ret)
+		return ret;
+
+	return dsi_link_clk_prepare_enable_6g(msm_host);
+}
+
+int dsi_link_clk_enable_6g_v2(struct msm_dsi_host *msm_host)
+{
+	int ret;
+
+	ret = dsi_link_clk_set_rate_6g_v2(msm_host);
+	if (ret)
+		return ret;
+
+	return dsi_link_clk_prepare_enable_6g(msm_host);
+}
+
 int dsi_link_clk_enable_v2(struct msm_dsi_host *msm_host)
 {
 	int ret;
@@ -656,6 +714,13 @@ void dsi_link_clk_disable_6g(struct msm_dsi_host *msm_host)
 	clk_disable_unprepare(msm_host->byte_clk);
 }
 
+void dsi_link_clk_disable_6g_v2(struct msm_dsi_host *msm_host)
+{
+	/* Drop the performance state vote */
+	dev_pm_opp_set_rate(&msm_host->pdev->dev, 0);
+	dsi_link_clk_disable_6g(msm_host);
+}
+
 void dsi_link_clk_disable_v2(struct msm_dsi_host *msm_host)
 {
 	clk_disable_unprepare(msm_host->pixel_clk);
@@ -1864,6 +1929,12 @@ int msm_dsi_host_init(struct msm_dsi *msm_dsi)
 		goto fail;
 	}
 
+	dev_pm_opp_set_clkname(&pdev->dev, "byte");
+
+	ret = dev_pm_opp_of_add_table(&pdev->dev);
+	if (ret < 0)
+		dev_err(&pdev->dev, "failed to init OPP table: %d\n", ret);
+
 	msm_host->rx_buf = devm_kzalloc(&pdev->dev, SZ_4K, GFP_KERNEL);
 	if (!msm_host->rx_buf) {
 		ret = -ENOMEM;
@@ -1896,6 +1967,7 @@ void msm_dsi_host_destroy(struct mipi_dsi_host *host)
 	struct msm_dsi_host *msm_host = to_msm_dsi_host(host);
 
 	DBG("");
+	dev_pm_opp_of_remove_table(&msm_host->pdev->dev);
 	dsi_tx_buf_free(msm_host);
 	if (msm_host->workqueue) {
 		flush_workqueue(msm_host->workqueue);
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

  parent reply	other threads:[~2019-03-20  9:49 UTC|newest]

Thread overview: 38+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-03-20  9:49 [RFC v2 00/11] DVFS in the OPP core Rajendra Nayak
2019-03-20  9:49 ` [RFC v2 01/11] OPP: Don't overwrite rounded clk rate Rajendra Nayak
2019-06-11 10:54   ` Viresh Kumar
2019-06-12  7:42     ` Rajendra Nayak
2019-06-12  8:25       ` Viresh Kumar
2019-06-13  9:54         ` Viresh Kumar
2019-06-14  5:27           ` Viresh Kumar
2019-06-17  3:50             ` Viresh Kumar
2019-06-17  4:07               ` Rajendra Nayak
2019-06-17  4:17                 ` Viresh Kumar
2019-06-17  4:25                   ` Rajendra Nayak
2019-06-14  5:54           ` Rajendra Nayak
2019-03-20  9:49 ` [RFC v2 02/11] OPP: Make dev_pm_opp_set_rate() with freq=0 as valid Rajendra Nayak
2019-06-14  6:32   ` Viresh Kumar
2019-06-17  4:04     ` Rajendra Nayak
2019-03-20  9:49 ` [RFC v2 03/11] tty: serial: qcom_geni_serial: Use OPP API to set clk/perf state Rajendra Nayak
2020-08-11 23:11   ` John Stultz
2020-08-12  1:33     ` John Stultz
2020-08-12  5:48       ` Rajendra Nayak
2020-08-12  7:35         ` Amit Pundir
2020-08-12  7:39           ` Rajendra Nayak
2020-08-12  9:26             ` Rajendra Nayak
2019-03-20  9:49 ` [RFC v2 04/11] spi: spi-geni-qcom: " Rajendra Nayak
2019-03-20  9:49 ` [RFC v2 05/11] arm64: dts: sdm845: Add OPP table for all qup devices Rajendra Nayak
2019-03-20  9:49 ` [RFC v2 06/11] scsi: ufs: Add support to manage multiple power domains in ufshcd-pltfrm Rajendra Nayak
2019-03-20  9:49 ` [RFC v2 07/11] scsi: ufs: Add support for specifying OPP tables in DT Rajendra Nayak
2019-03-20  9:49 ` [RFC v2 08/11] arm64: dts: sdm845: Add ufs opps and power-domains Rajendra Nayak
2019-05-14  7:53   ` Ulf Hansson
2019-03-20  9:49 ` [RFC v2 09/11] drm/msm/dpu: Use OPP API to set clk/perf state Rajendra Nayak
2019-04-10  3:49   ` Viresh Kumar
2019-04-10  3:49     ` Viresh Kumar
2019-03-20  9:49 ` Rajendra Nayak [this message]
2019-03-20  9:49 ` [RFC v2 11/11] arm64: dts: sdm845: Add DSI and MDP OPP tables and power-domains Rajendra Nayak
2019-04-10  3:51 ` [RFC v2 00/11] DVFS in the OPP core Viresh Kumar
2019-04-10  3:51   ` Viresh Kumar
2019-05-21  6:22 ` Viresh Kumar
2019-05-24  6:03   ` Rajendra Nayak
2019-06-17  4:26 ` Viresh Kumar

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190320094918.20234-11-rnayak@codeaurora.org \
    --to=rnayak@codeaurora.org \
    --cc=dianders@chromium.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=linux-scsi@vger.kernel.org \
    --cc=linux-serial@vger.kernel.org \
    --cc=linux-spi@vger.kernel.org \
    --cc=rafael@kernel.org \
    --cc=swboyd@chromium.org \
    --cc=ulf.hansson@linaro.org \
    --cc=viresh.kumar@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).