Linux-ARM-MSM Archive on lore.kernel.org
 help / color / Atom feed
WARNING: multiple messages refer to this Message-ID
From: Viresh Kumar <viresh.kumar@linaro.org>
To: Rajendra Nayak <rnayak@codeaurora.org>
Cc: linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org,
	linux-pm@vger.kernel.org, linux-serial@vger.kernel.org,
	linux-spi@vger.kernel.org, dri-devel@lists.freedesktop.org,
	linux-scsi@vger.kernel.org, swboyd@chromium.org,
	ulf.hansson@linaro.org, dianders@chromium.org, rafael@kernel.org
Subject: Re: [RFC v2 09/11] drm/msm/dpu: Use OPP API to set clk/perf state
Date: Wed, 10 Apr 2019 09:19:28 +0530
Message-ID: <20190410034928.wkfnebwmcdonhto6@vireshk-i7> (raw)
In-Reply-To: <20190320094918.20234-10-rnayak@codeaurora.org>

On 20-03-19, 15:19, Rajendra Nayak wrote:
> On some qualcomm platforms DPU needs to express a perforamnce state
> requirement on a power domain depennding on the clock rates.
> Use OPP table from DT to register with OPP framework and use
> dev_pm_opp_set_rate() to set the clk/perf state.
> 
> Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
> ---
>  drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c | 7 ++++++-
>  drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c       | 9 +++++++++
>  2 files changed, 15 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c
> index 9f20f397f77d..db21a86b242b 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c
> @@ -15,6 +15,7 @@
>  #include <linux/debugfs.h>
>  #include <linux/errno.h>
>  #include <linux/mutex.h>
> +#include <linux/pm_opp.h>
>  #include <linux/sort.h>
>  #include <linux/clk.h>
>  #include <linux/bitmap.h>
> @@ -298,7 +299,11 @@ static int _dpu_core_perf_set_core_clk_rate(struct dpu_kms *kms, u64 rate)
>  		rate = core_clk->max_rate;
>  
>  	core_clk->rate = rate;
> -	return msm_dss_clk_set_rate(core_clk, 1);
> +
> +	if (dev_pm_opp_get_opp_table(&kms->pdev->dev))

This takes a reference of the OPP table, you need to call put thing as well to
balance it off.

> +		return dev_pm_opp_set_rate(&kms->pdev->dev, core_clk->rate);
> +	else
> +		return msm_dss_clk_set_rate(core_clk, 1);
>  }
-- 
viresh

From: Viresh Kumar <viresh.kumar@linaro.org>
To: Rajendra Nayak <rnayak@codeaurora.org>
Cc: linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org,
	linux-pm@vger.kernel.org, linux-serial@vger.kernel.org,
	linux-spi@vger.kernel.org, dri-devel@lists.freedesktop.org,
	linux-scsi@vger.kernel.org, swboyd@chromium.org,
	ulf.hansson@linaro.org, dianders@chromium.org, rafael@kernel.org
Subject: Re: [RFC v2 09/11] drm/msm/dpu: Use OPP API to set clk/perf state
Date: Wed, 10 Apr 2019 09:19:28 +0530
Message-ID: <20190410034928.wkfnebwmcdonhto6@vireshk-i7> (raw)
Message-ID: <20190410034928.9P4Va0ZB5--3Lym0-60zAUpPoWxU9Ieowbdx_ooy5hw@z> (raw)
In-Reply-To: <20190320094918.20234-10-rnayak@codeaurora.org>

On 20-03-19, 15:19, Rajendra Nayak wrote:
> On some qualcomm platforms DPU needs to express a perforamnce state
> requirement on a power domain depennding on the clock rates.
> Use OPP table from DT to register with OPP framework and use
> dev_pm_opp_set_rate() to set the clk/perf state.
> 
> Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
> ---
>  drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c | 7 ++++++-
>  drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c       | 9 +++++++++
>  2 files changed, 15 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c
> index 9f20f397f77d..db21a86b242b 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c
> @@ -15,6 +15,7 @@
>  #include <linux/debugfs.h>
>  #include <linux/errno.h>
>  #include <linux/mutex.h>
> +#include <linux/pm_opp.h>
>  #include <linux/sort.h>
>  #include <linux/clk.h>
>  #include <linux/bitmap.h>
> @@ -298,7 +299,11 @@ static int _dpu_core_perf_set_core_clk_rate(struct dpu_kms *kms, u64 rate)
>  		rate = core_clk->max_rate;
>  
>  	core_clk->rate = rate;
> -	return msm_dss_clk_set_rate(core_clk, 1);
> +
> +	if (dev_pm_opp_get_opp_table(&kms->pdev->dev))

This takes a reference of the OPP table, you need to call put thing as well to
balance it off.

> +		return dev_pm_opp_set_rate(&kms->pdev->dev, core_clk->rate);
> +	else
> +		return msm_dss_clk_set_rate(core_clk, 1);
>  }
-- 
viresh

  reply index

Thread overview: 32+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-03-20  9:49 [RFC v2 00/11] DVFS in the OPP core Rajendra Nayak
2019-03-20  9:49 ` [RFC v2 01/11] OPP: Don't overwrite rounded clk rate Rajendra Nayak
2019-06-11 10:54   ` Viresh Kumar
2019-06-12  7:42     ` Rajendra Nayak
2019-06-12  8:25       ` Viresh Kumar
2019-06-13  9:54         ` Viresh Kumar
2019-06-14  5:27           ` Viresh Kumar
2019-06-17  3:50             ` Viresh Kumar
2019-06-17  4:07               ` Rajendra Nayak
2019-06-17  4:17                 ` Viresh Kumar
2019-06-17  4:25                   ` Rajendra Nayak
2019-06-14  5:54           ` Rajendra Nayak
2019-03-20  9:49 ` [RFC v2 02/11] OPP: Make dev_pm_opp_set_rate() with freq=0 as valid Rajendra Nayak
2019-06-14  6:32   ` Viresh Kumar
2019-06-17  4:04     ` Rajendra Nayak
2019-03-20  9:49 ` [RFC v2 03/11] tty: serial: qcom_geni_serial: Use OPP API to set clk/perf state Rajendra Nayak
2019-03-20  9:49 ` [RFC v2 04/11] spi: spi-geni-qcom: " Rajendra Nayak
2019-03-20  9:49 ` [RFC v2 05/11] arm64: dts: sdm845: Add OPP table for all qup devices Rajendra Nayak
2019-03-20  9:49 ` [RFC v2 06/11] scsi: ufs: Add support to manage multiple power domains in ufshcd-pltfrm Rajendra Nayak
2019-03-20  9:49 ` [RFC v2 07/11] scsi: ufs: Add support for specifying OPP tables in DT Rajendra Nayak
2019-03-20  9:49 ` [RFC v2 08/11] arm64: dts: sdm845: Add ufs opps and power-domains Rajendra Nayak
2019-05-14  7:53   ` Ulf Hansson
2019-03-20  9:49 ` [RFC v2 09/11] drm/msm/dpu: Use OPP API to set clk/perf state Rajendra Nayak
2019-04-10  3:49   ` Viresh Kumar [this message]
2019-04-10  3:49     ` Viresh Kumar
2019-03-20  9:49 ` [RFC v2 10/11] drm/msm: dsi: " Rajendra Nayak
2019-03-20  9:49 ` [RFC v2 11/11] arm64: dts: sdm845: Add DSI and MDP OPP tables and power-domains Rajendra Nayak
2019-04-10  3:51 ` [RFC v2 00/11] DVFS in the OPP core Viresh Kumar
2019-04-10  3:51   ` Viresh Kumar
2019-05-21  6:22 ` Viresh Kumar
2019-05-24  6:03   ` Rajendra Nayak
2019-06-17  4:26 ` Viresh Kumar

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190410034928.wkfnebwmcdonhto6@vireshk-i7 \
    --to=viresh.kumar@linaro.org \
    --cc=dianders@chromium.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=linux-scsi@vger.kernel.org \
    --cc=linux-serial@vger.kernel.org \
    --cc=linux-spi@vger.kernel.org \
    --cc=rafael@kernel.org \
    --cc=rnayak@codeaurora.org \
    --cc=swboyd@chromium.org \
    --cc=ulf.hansson@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-ARM-MSM Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-arm-msm/0 linux-arm-msm/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-arm-msm linux-arm-msm/ https://lore.kernel.org/linux-arm-msm \
		linux-arm-msm@vger.kernel.org linux-arm-msm@archiver.kernel.org
	public-inbox-index linux-arm-msm


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-arm-msm


AGPL code for this site: git clone https://public-inbox.org/ public-inbox