From: Georgi Djakov <georgi.djakov@linaro.org>
To: robh+dt@kernel.org, bjorn.andersson@linaro.org,
agross@kernel.org, georgi.djakov@linaro.org
Cc: vkoul@kernel.org, evgreen@chromium.org, daidavid1@codeaurora.org,
linux-pm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org
Subject: [PATCH v4 1/5] dt-bindings: interconnect: Add Qualcomm QCS404 DT bindings
Date: Thu, 13 Jun 2019 18:13:19 +0300 [thread overview]
Message-ID: <20190613151323.10850-2-georgi.djakov@linaro.org> (raw)
In-Reply-To: <20190613151323.10850-1-georgi.djakov@linaro.org>
The Qualcomm QCS404 platform has several buses that could be controlled
and tuned according to the bandwidth demand.
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
---
v4:
- Add the DT header into this patch.
- Pick Bjorn's r-b.
v3:
- Add a reg property and move the interconnect nodes under the "soc" node.
v2:
- No changes.
.../bindings/interconnect/qcom,qcs404.txt | 46 ++++++++++
.../dt-bindings/interconnect/qcom,qcs404.h | 88 +++++++++++++++++++
2 files changed, 134 insertions(+)
create mode 100644 Documentation/devicetree/bindings/interconnect/qcom,qcs404.txt
create mode 100644 include/dt-bindings/interconnect/qcom,qcs404.h
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,qcs404.txt b/Documentation/devicetree/bindings/interconnect/qcom,qcs404.txt
new file mode 100644
index 000000000000..14a827268dda
--- /dev/null
+++ b/Documentation/devicetree/bindings/interconnect/qcom,qcs404.txt
@@ -0,0 +1,46 @@
+Qualcomm QCS404 Network-On-Chip interconnect driver binding
+-----------------------------------------------------------
+
+Required properties :
+- compatible : shall contain only one of the following:
+ "qcom,qcs404-bimc"
+ "qcom,qcs404-pcnoc"
+ "qcom,qcs404-snoc"
+- #interconnect-cells : should contain 1
+
+Optional properties :
+reg : specifies the physical base address and size of registers
+clocks : list of phandles and specifiers to all interconnect bus clocks
+clock-names : clock names should include both "bus_clk" and "bus_a_clk"
+
+Example:
+
+soc {
+ ...
+ bimc: interconnect@400000 {
+ reg = <0x00400000 0x80000>;
+ compatible = "qcom,qcs404-bimc";
+ #interconnect-cells = <1>;
+ clock-names = "bus_clk", "bus_a_clk";
+ clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
+ <&rpmcc RPM_SMD_BIMC_A_CLK>;
+ };
+
+ pnoc: interconnect@500000 {
+ reg = <0x00500000 0x15080>;
+ compatible = "qcom,qcs404-pcnoc";
+ #interconnect-cells = <1>;
+ clock-names = "bus_clk", "bus_a_clk";
+ clocks = <&rpmcc RPM_SMD_PNOC_CLK>,
+ <&rpmcc RPM_SMD_PNOC_A_CLK>;
+ };
+
+ snoc: interconnect@580000 {
+ reg = <0x00580000 0x23080>;
+ compatible = "qcom,qcs404-snoc";
+ #interconnect-cells = <1>;
+ clock-names = "bus_clk", "bus_a_clk";
+ clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
+ <&rpmcc RPM_SMD_SNOC_A_CLK>;
+ };
+};
diff --git a/include/dt-bindings/interconnect/qcom,qcs404.h b/include/dt-bindings/interconnect/qcom,qcs404.h
new file mode 100644
index 000000000000..960f6e39c5f2
--- /dev/null
+++ b/include/dt-bindings/interconnect/qcom,qcs404.h
@@ -0,0 +1,88 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Qualcomm interconnect IDs
+ *
+ * Copyright (c) 2019, Linaro Ltd.
+ * Author: Georgi Djakov <georgi.djakov@linaro.org>
+ */
+
+#ifndef __DT_BINDINGS_INTERCONNECT_QCOM_QCS404_H
+#define __DT_BINDINGS_INTERCONNECT_QCOM_QCS404_H
+
+#define MASTER_AMPSS_M0 0
+#define MASTER_OXILI 1
+#define MASTER_MDP_PORT0 2
+#define MASTER_SNOC_BIMC_1 3
+#define MASTER_TCU_0 4
+#define SLAVE_EBI_CH0 5
+#define SLAVE_BIMC_SNOC 6
+
+#define MASTER_SPDM 0
+#define MASTER_BLSP_1 1
+#define MASTER_BLSP_2 2
+#define MASTER_XI_USB_HS1 3
+#define MASTER_CRYPT0 4
+#define MASTER_SDCC_1 5
+#define MASTER_SDCC_2 6
+#define MASTER_SNOC_PCNOC 7
+#define MASTER_QPIC 8
+#define PCNOC_INT_0 9
+#define PCNOC_INT_2 10
+#define PCNOC_INT_3 11
+#define PCNOC_S_0 12
+#define PCNOC_S_1 13
+#define PCNOC_S_2 14
+#define PCNOC_S_3 15
+#define PCNOC_S_4 16
+#define PCNOC_S_6 17
+#define PCNOC_S_7 18
+#define PCNOC_S_8 19
+#define PCNOC_S_9 20
+#define PCNOC_S_10 21
+#define PCNOC_S_11 22
+#define SLAVE_SPDM 23
+#define SLAVE_PDM 24
+#define SLAVE_PRNG 25
+#define SLAVE_TCSR 26
+#define SLAVE_SNOC_CFG 27
+#define SLAVE_MESSAGE_RAM 28
+#define SLAVE_DISP_SS_CFG 29
+#define SLAVE_GPU_CFG 30
+#define SLAVE_BLSP_1 31
+#define SLAVE_BLSP_2 32
+#define SLAVE_TLMM_NORTH 33
+#define SLAVE_PCIE 34
+#define SLAVE_ETHERNET 35
+#define SLAVE_TLMM_EAST 36
+#define SLAVE_TCU 37
+#define SLAVE_PMIC_ARB 38
+#define SLAVE_SDCC_1 39
+#define SLAVE_SDCC_2 40
+#define SLAVE_TLMM_SOUTH 41
+#define SLAVE_USB_HS 42
+#define SLAVE_USB3 43
+#define SLAVE_CRYPTO_0_CFG 44
+#define SLAVE_PCNOC_SNOC 45
+
+#define MASTER_QDSS_BAM 0
+#define MASTER_BIMC_SNOC 1
+#define MASTER_PCNOC_SNOC 2
+#define MASTER_QDSS_ETR 3
+#define MASTER_EMAC 4
+#define MASTER_PCIE 5
+#define MASTER_USB3 6
+#define QDSS_INT 7
+#define SNOC_INT_0 8
+#define SNOC_INT_1 9
+#define SNOC_INT_2 10
+#define SLAVE_KPSS_AHB 11
+#define SLAVE_WCSS 12
+#define SLAVE_SNOC_BIMC_1 13
+#define SLAVE_IMEM 14
+#define SLAVE_SNOC_PCNOC 15
+#define SLAVE_QDSS_STM 16
+#define SLAVE_CATS_0 17
+#define SLAVE_CATS_1 18
+#define SLAVE_LPASS 19
+
+#endif
next prev parent reply other threads:[~2019-06-13 15:14 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-06-13 15:13 [PATCH v4 0/5] Add QCS404 interconnect provider driver Georgi Djakov
2019-06-13 15:13 ` Georgi Djakov [this message]
2019-06-25 15:00 ` [PATCH v4 1/5] dt-bindings: interconnect: Add Qualcomm QCS404 DT bindings Georgi Djakov
2019-07-08 19:26 ` Bjorn Andersson
2019-07-15 13:56 ` Georgi Djakov
2019-06-13 15:13 ` [PATCH v4 2/5] soc: qcom: smd-rpm: Create RPM interconnect proxy child device Georgi Djakov
2019-06-13 15:40 ` Bjorn Andersson
2019-10-07 2:01 ` Brian Masney
2019-10-07 5:28 ` Bjorn Andersson
2019-06-13 15:13 ` [PATCH v4 3/5] interconnect: qcom: Add interconnect SMD over SMD driver Georgi Djakov
2019-06-13 15:42 ` Bjorn Andersson
2019-06-13 15:13 ` [PATCH v4 4/5] interconnect: qcom: Add QCS404 interconnect provider driver Georgi Djakov
2019-06-13 15:47 ` Bjorn Andersson
2019-06-13 15:13 ` [PATCH v4 5/5] arm64: dts: qcs404: Add interconnect provider DT nodes Georgi Djakov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190613151323.10850-2-georgi.djakov@linaro.org \
--to=georgi.djakov@linaro.org \
--cc=agross@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=daidavid1@codeaurora.org \
--cc=devicetree@vger.kernel.org \
--cc=evgreen@chromium.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).