Linux-ARM-MSM Archive on lore.kernel.org
 help / color / Atom feed
From: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
To: unlisted-recipients:; (no To-header on input)
Cc: agross@kernel.org, bjorn.andersson@linaro.org,
	lgirdwood@gmail.com, broonie@kernel.org, robh+dt@kernel.org,
	mark.rutland@arm.com, linux-arm-msm@vger.kernel.org,
	linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
	Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Subject: [PATCH v4 0/7] PM8005 and PMS405 regulator support
Date: Thu, 13 Jun 2019 14:24:36 -0700
Message-ID: <20190613212436.6940-1-jeffrey.l.hugo@gmail.com> (raw)

The MSM8998 MTP reference platform supplies VDD_GFX from s1 of the
pm8005 PMIC.  VDD_GFX is needed to turn on the GPU.  As we are looking
to bring up the GPU, add the support for pm8005 and wire up s1 in a
basic manner so that we have this dependency out of the way and can
focus on enabling the GPU driver.

The s3 regulator of PMS405 is used for voltage scaling of the CPU on
QCS404.

Both PMICs are very similar in design, so add the base support with one,
and trivially add the support for the other on top.

v4:
-fix the linear range change to use the correct implementation
-mask out the non-mode bits when reading the hardware reg
-correct the pms405 supply pins listing
-correct the pms405 s3 supply name in the match struct
-correct subject names to be more aligned with the subsystem history

v3:
-Allow PMS405 regulators to be enabled and disabled, instead of the
outdated "always on" concept

v2:
-Perform if statement cleanups per review discussion
-Pull in linear range support since its related, and simple
-Rework the PM8005 to minimize special cases in the driver
-"common2" is now ftsmps426 since that design first implemented it
-Reworked the PMS405 changes on top, since they are related to pm8005
and
trivial

Jeffrey Hugo (4):
  drivers: regulator: qcom_spmi: Refactor get_mode/set_mode
  dt-bindings: qcom_spmi: Document PM8005 regulators
  regulator: qcom_spmi: Add support for PM8005
  arm64: dts: msm8998-mtp: Add pm8005_s1 regulator

Jorge Ramirez (2):
  dt-bindings: qcom_spmi: Document pms405 support
  drivers: regulator: qcom: add PMS405 SPMI regulator

Jorge Ramirez-Ortiz (1):
  drivers: regulator: qcom_spmi: enable linear range info

 .../regulator/qcom,spmi-regulator.txt         |  22 ++
 arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi     |  17 ++
 drivers/regulator/qcom_spmi-regulator.c       | 237 +++++++++++++++++-
 3 files changed, 269 insertions(+), 7 deletions(-)

-- 
2.17.1


             reply index

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-06-13 21:24 Jeffrey Hugo [this message]
2019-06-13 21:25 ` [PATCH v4 1/7] regulator: qcom_spmi: enable linear range info Jeffrey Hugo
2019-06-13 21:25   ` [PATCH v4 2/7] regulator: qcom_spmi: Refactor get_mode/set_mode Jeffrey Hugo
2019-06-13 21:32     ` Bjorn Andersson
2019-06-17 15:24     ` Applied "regulator: qcom_spmi: Refactor get_mode/set_mode" to the regulator tree Mark Brown
2019-06-17 15:24   ` Applied "regulator: qcom_spmi: enable linear range info" " Mark Brown
2019-06-13 21:25 ` [PATCH v4 3/7] dt-bindings: qcom_spmi: Document PM8005 regulators Jeffrey Hugo
2019-06-13 21:25   ` [PATCH v4 4/7] regulator: qcom_spmi: Add support for PM8005 Jeffrey Hugo
2019-06-17 15:05     ` Mark Brown
2019-06-17 15:17       ` Jeffrey Hugo
2019-06-17 16:03         ` Mark Brown
2019-06-17 17:07           ` Jeffrey Hugo
2019-06-17 18:37             ` Mark Brown
     [not found]               ` <CAOCk7NpbZwAreGpVCvF2yFBDJKbAxBZ23oncfF_SyEwoiC2+PQ@mail.gmail.com>
     [not found]                 ` <20190617192413.GI5316@sirena.org.uk>
2019-06-17 19:41                   ` Jeffrey Hugo
2019-06-13 21:26 ` [PATCH v4 5/7] arm64: dts: msm8998-mtp: Add pm8005_s1 regulator Jeffrey Hugo
2019-06-13 21:27 ` [PATCH v4 6/7] dt-bindings: qcom_spmi: Document pms405 support Jeffrey Hugo
2019-06-13 21:27   ` [PATCH v4 7/7] regulator: qcom_spmi: add PMS405 SPMI regulator Jeffrey Hugo
2019-06-13 21:37     ` Bjorn Andersson
2019-06-13 21:37   ` [PATCH v4 6/7] dt-bindings: qcom_spmi: Document pms405 support Bjorn Andersson
2019-06-17 14:58 ` [PATCH v4 0/7] PM8005 and PMS405 regulator support Mark Brown
2019-06-17 15:04   ` Jeffrey Hugo
2019-06-17 15:12     ` Mark Brown

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190613212436.6940-1-jeffrey.l.hugo@gmail.com \
    --to=jeffrey.l.hugo@gmail.com \
    --cc=agross@kernel.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=broonie@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=lgirdwood@gmail.com \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-ARM-MSM Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-arm-msm/0 linux-arm-msm/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-arm-msm linux-arm-msm/ https://lore.kernel.org/linux-arm-msm \
		linux-arm-msm@vger.kernel.org linux-arm-msm@archiver.kernel.org
	public-inbox-index linux-arm-msm


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-arm-msm


AGPL code for this site: git clone https://public-inbox.org/ public-inbox