Linux-ARM-MSM Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH 1/2] dt-bindings: pinctrl: qcom: Add SM8150 pinctrl binding
@ 2019-06-14  5:30 Vinod Koul
  2019-06-14  5:30 ` [PATCH 2/2] pinctrl: qcom: Add SM8150 pinctrl driver Vinod Koul
                   ` (2 more replies)
  0 siblings, 3 replies; 8+ messages in thread
From: Vinod Koul @ 2019-06-14  5:30 UTC (permalink / raw)
  To: Linus Walleij
  Cc: linux-arm-msm, Bjorn Andersson, Prasad Sodagudi, Andy Gross,
	David Brown, Rob Herring, Mark Rutland, linux-gpio, devicetree,
	linux-kernel, Isaac J . Manjarres, Vinod Koul

From: Prasad Sodagudi <psodagud@codeaurora.org>

Add the binding for the TLMM pinctrl block found in the SM8150 platform.

Signed-off-by: Prasad Sodagudi <psodagud@codeaurora.org>
Signed-off-by: Isaac J. Manjarres <isaacm@codeaurora.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
---
 .../bindings/pinctrl/qcom,sm8150-pinctrl      | 200 ++++++++++++++++++
 1 file changed, 200 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,sm8150-pinctrl

diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8150-pinctrl b/Documentation/devicetree/bindings/pinctrl/qcom,sm8150-pinctrl
new file mode 100644
index 000000000000..4f21d18b0be2
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8150-pinctrl
@@ -0,0 +1,200 @@
+Qualcomm SM8150 TLMM block
+
+This binding describes the Top Level Mode Multiplexer block found in the
+QCS404 platform.
+
+- compatible:
+	Usage: required
+	Value type: <string>
+	Definition: must be "qcom,sm8150-pinctrl"
+
+- reg:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: the base address and size of the north, south , west
+		    and east TLMM tiles.
+
+- reg-names:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Defintiion: names for the cells of reg, must contain "north", "south"
+		    "west" and "east".
+
+- interrupts:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: should specify the TLMM summary IRQ.
+
+- interrupt-controller:
+	Usage: required
+	Value type: <none>
+	Definition: identifies this node as an interrupt controller
+
+- #interrupt-cells:
+	Usage: required
+	Value type: <u32>
+	Definition: must be 2. Specifying the pin number and flags, as defined
+		    in <dt-bindings/interrupt-controller/irq.h>
+
+- gpio-controller:
+	Usage: required
+	Value type: <none>
+	Definition: identifies this node as a gpio controller
+
+- #gpio-cells:
+	Usage: required
+	Value type: <u32>
+	Definition: must be 2. Specifying the pin number and flags, as defined
+		    in <dt-bindings/gpio/gpio.h>
+
+Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for
+a general description of GPIO and interrupt bindings.
+
+Please refer to pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices, including the meaning of the
+phrase "pin configuration node".
+
+The pin configuration nodes act as a container for an arbitrary number of
+subnodes. Each of these subnodes represents some desired configuration for a
+pin, a group, or a list of pins or groups. This configuration can include the
+mux function to select on those pin(s)/group(s), and various pin configuration
+parameters, such as pull-up, drive strength, etc.
+
+
+PIN CONFIGURATION NODES:
+
+The name of each subnode is not important; all subnodes should be enumerated
+and processed purely based on their content.
+
+Each subnode only affects those parameters that are explicitly listed. In
+other words, a subnode that lists a mux function but no pin configuration
+parameters implies no information about any pin configuration parameters.
+Similarly, a pin subnode that describes a pullup parameter implies no
+information about e.g. the mux function.
+
+
+The following generic properties as defined in pinctrl-bindings.txt are valid
+to specify in a pin configuration subnode:
+
+- pins:
+	Usage: required
+	Value type: <string-array>
+	Definition: List of gpio pins affected by the properties specified in
+		    this subnode.
+
+		    Valid pins are:
+		      gpio0-gpio149
+		        Supports mux, bias and drive-strength
+
+		      sdc1_clk, sdc1_cmd, sdc1_data sdc2_clk, sdc2_cmd,
+		      sdc2_data sdc1_rclk
+		        Supports bias and drive-strength
+
+		      ufs_reset
+		        Supports bias and drive-strength
+
+- function:
+	Usage: required
+	Value type: <string>
+	Definition: Specify the alternative function to be configured for the
+		    specified pins. Functions are only valid for gpio pins.
+		    Valid values are:
+
+		    blsp_uart1, blsp_spi1, blsp_i2c1, blsp_uim1, atest_tsens,
+		    bimc_dte1, dac_calib0, blsp_spi8, blsp_uart8, blsp_uim8,
+		    qdss_cti_trig_out_b, bimc_dte0, dac_calib1, qdss_cti_trig_in_b,
+		    dac_calib2, atest_tsens2, atest_usb1, blsp_spi10, blsp_uart10,
+		    blsp_uim10, atest_bbrx1, atest_usb13, atest_bbrx0, atest_usb12,
+		    mdp_vsync, edp_lcd, blsp_i2c10, atest_gpsadc1, atest_usb11,
+		    atest_gpsadc0, edp_hot, atest_usb10, m_voc, dac_gpio, atest_char,
+		    cam_mclk, pll_bypassnl, qdss_stm7, blsp_i2c8, qdss_tracedata_b,
+		    pll_reset, qdss_stm6, qdss_stm5, qdss_stm4, atest_usb2, cci_i2c,
+		    qdss_stm3, dac_calib3, atest_usb23, atest_char3, dac_calib4,
+		    qdss_stm2, atest_usb22, atest_char2, qdss_stm1, dac_calib5,
+		    atest_usb21, atest_char1, dbg_out, qdss_stm0, dac_calib6,
+		    atest_usb20, atest_char0, dac_calib10, qdss_stm10,
+		    qdss_cti_trig_in_a, cci_timer4, blsp_spi6, blsp_uart6, blsp_uim6,
+		    blsp2_spi, qdss_stm9, qdss_cti_trig_out_a, dac_calib11,
+		    qdss_stm8, cci_timer0, qdss_stm13, dac_calib7, cci_timer1,
+		    qdss_stm12, dac_calib8, cci_timer2, blsp1_spi, qdss_stm11,
+		    dac_calib9, cci_timer3, cci_async, dac_calib12, blsp_i2c6,
+		    qdss_tracectl_a, dac_calib13, qdss_traceclk_a, dac_calib14,
+		    dac_calib15, hdmi_rcv, dac_calib16, hdmi_cec, pwr_modem,
+		    dac_calib17, hdmi_ddc, pwr_nav, dac_calib18, pwr_crypto,
+		    dac_calib19, hdmi_hot, dac_calib20, dac_calib21, pci_e0,
+		    dac_calib22, dac_calib23, dac_calib24, tsif1_sync, dac_calib25,
+		    sd_write, tsif1_error, blsp_spi2, blsp_uart2, blsp_uim2,
+		    qdss_cti, blsp_i2c2, blsp_spi3, blsp_uart3, blsp_uim3, blsp_i2c3,
+		    uim3, blsp_spi9, blsp_uart9, blsp_uim9, blsp10_spi, blsp_i2c9,
+		    blsp_spi7, blsp_uart7, blsp_uim7, qdss_tracedata_a, blsp_i2c7,
+		    qua_mi2s, gcc_gp1_clk_a, ssc_irq, uim4, blsp_spi11, blsp_uart11,
+		    blsp_uim11, gcc_gp2_clk_a, gcc_gp3_clk_a, blsp_i2c11, cri_trng0,
+		    cri_trng1, cri_trng, qdss_stm18, pri_mi2s, qdss_stm17, blsp_spi4,
+		    blsp_uart4, blsp_uim4, qdss_stm16, qdss_stm15, blsp_i2c4,
+		    qdss_stm14, dac_calib26, spkr_i2s, audio_ref, lpass_slimbus,
+		    isense_dbg, tsense_pwm1, tsense_pwm2, btfm_slimbus, ter_mi2s,
+		    qdss_stm22, qdss_stm21, qdss_stm20, qdss_stm19, gcc_gp1_clk_b,
+		    sec_mi2s, blsp_spi5, blsp_uart5, blsp_uim5, gcc_gp2_clk_b,
+		    gcc_gp3_clk_b, blsp_i2c5, blsp_spi12, blsp_uart12, blsp_uim12,
+		    qdss_stm25, qdss_stm31, blsp_i2c12, qdss_stm30, qdss_stm29,
+		    tsif1_clk, qdss_stm28, tsif1_en, tsif1_data, sdc4_cmd, qdss_stm27,
+		    qdss_traceclk_b, tsif2_error, sdc43, vfr_1, qdss_stm26, tsif2_clk,
+		    sdc4_clk, qdss_stm24, tsif2_en, sdc42, qdss_stm23, qdss_tracectl_b,
+		    sd_card, tsif2_data, sdc41, tsif2_sync, sdc40, mdp_vsync_p_b,
+		    ldo_en, mdp_vsync_s_b, ldo_update, blsp11_uart_tx_b, blsp11_uart_rx_b,
+		    blsp11_i2c_sda_b, prng_rosc, blsp11_i2c_scl_b, uim2, uim1, uim_batt,
+		    pci_e2, pa_indicator, adsp_ext, ddr_bist, qdss_tracedata_11,
+		    qdss_tracedata_12, modem_tsync, nav_dr, nav_pps, pci_e1, gsm_tx,
+		    qspi_cs, ssbi2, ssbi1, mss_lte, qspi_clk, qspi0, qspi1, qspi2, qspi3,
+		    gpio
+
+- bias-disable:
+	Usage: optional
+	Value type: <none>
+	Definition: The specified pins should be configued as no pull.
+
+- bias-pull-down:
+	Usage: optional
+	Value type: <none>
+	Definition: The specified pins should be configued as pull down.
+
+- bias-pull-up:
+	Usage: optional
+	Value type: <none>
+	Definition: The specified pins should be configued as pull up.
+
+- output-high:
+	Usage: optional
+	Value type: <none>
+	Definition: The specified pins are configured in output mode, driven
+		    high.
+		    Not valid for sdc pins.
+
+- output-low:
+	Usage: optional
+	Value type: <none>
+	Definition: The specified pins are configured in output mode, driven
+		    low.
+		    Not valid for sdc pins.
+
+- drive-strength:
+	Usage: optional
+	Value type: <u32>
+	Definition: Selects the drive strength for the specified pins, in mA.
+		    Valid values are: 2, 4, 6, 8, 10, 12, 14 and 16
+
+Example:
+
+	tlmm: pinctrl@3000000 {
+		compatible = "qcom,sm8150-pinctrl";
+		reg = <0x03100000 0x300000>,
+		      <0x03500000 0x300000>,
+		      <0x03900000 0x300000>,
+		      <0x03D00000 0x300000>;
+		reg-names = "west", "east", "north", "south";
+		interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
-- 
2.20.1


^ permalink raw reply	[flat|nested] 8+ messages in thread

end of thread, back to index

Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-06-14  5:30 [PATCH 1/2] dt-bindings: pinctrl: qcom: Add SM8150 pinctrl binding Vinod Koul
2019-06-14  5:30 ` [PATCH 2/2] pinctrl: qcom: Add SM8150 pinctrl driver Vinod Koul
2019-06-17  4:17   ` Bjorn Andersson
2019-06-17  6:26     ` Vinod Koul
2019-06-17  4:20 ` [PATCH 1/2] dt-bindings: pinctrl: qcom: Add SM8150 pinctrl binding Bjorn Andersson
2019-06-17  6:21   ` Vinod Koul
2019-06-17  6:37 ` Manivannan Sadhasivam
2019-06-17  9:35   ` Vinod Koul

Linux-ARM-MSM Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-arm-msm/0 linux-arm-msm/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-arm-msm linux-arm-msm/ https://lore.kernel.org/linux-arm-msm \
		linux-arm-msm@vger.kernel.org linux-arm-msm@archiver.kernel.org
	public-inbox-index linux-arm-msm

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-arm-msm


AGPL code for this site: git clone https://public-inbox.org/ public-inbox