Linux-ARM-MSM Archive on lore.kernel.org
 help / color / Atom feed
From: Vinod Koul <vkoul@kernel.org>
To: Mathias Nyman <mathias.nyman@intel.com>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-arm-msm@vger.kernel.org,
	Bjorn Andersson <bjorn.andersson@linaro.org>,
	Vinod Koul <vkoul@kernel.org>,
	Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>,
	Christian Lamparter <chunkeey@googlemail.com>,
	linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v2 5/5] usb: xhci: allow multiple firmware versions
Date: Fri, 21 Jun 2019 14:29:13 +0530
Message-ID: <20190621085913.8722-6-vkoul@kernel.org> (raw)
In-Reply-To: <20190621085913.8722-1-vkoul@kernel.org>

Allow multiple firmware file versions in table and load them in
increasing order as we find them in the file system.

Signed-off-by: Vinod Koul <vkoul@kernel.org>
Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Cc: Christian Lamparter <chunkeey@googlemail.com>
---
 drivers/usb/host/xhci-pci.c | 46 +++++++++++++++++++++++++++++++++++--
 1 file changed, 44 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index 771948ce3d38..1fb890984d6d 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -336,13 +336,19 @@ static const struct renesas_fw_entry {
 	 *  - uPD720201 ES 2.0 sample whose revision ID is 2.
 	 *  - uPD720201 ES 2.1 sample & CS sample & Mass product, ID is 3.
 	 *  - uPD720202 ES 2.0 sample & CS sample & Mass product, ID is 2.
+	 *
+	 *  Entry expected_version should be kept in increasing order for a
+	 *  chip, so that driver will pick first version and if that fails
+	 *  then next one will be picked
 	 */
 	{ "K2013080.mem", 0x0014, 0x02, 0x2013 },
 	{ "K2013080.mem", 0x0014, 0x03, 0x2013 },
+	{ "K2026090.mem", 0x0014, 0x03, 0x2026 },
 	{ "K2013080.mem", 0x0015, 0x02, 0x2013 },
 };
 
 MODULE_FIRMWARE("K2013080.mem");
+MODULE_FIRMWARE("K2026090.mem");
 
 static const struct renesas_fw_entry *renesas_needs_fw_dl(struct pci_dev *dev)
 {
@@ -363,6 +369,24 @@ static const struct renesas_fw_entry *renesas_needs_fw_dl(struct pci_dev *dev)
 	return NULL;
 }
 
+static const struct
+renesas_fw_entry *renesas_get_next_entry(struct pci_dev *dev,
+					 const struct renesas_fw_entry *entry)
+{
+	const struct renesas_fw_entry *next_entry;
+	size_t i;
+
+	for (i = 0; i < ARRAY_SIZE(renesas_fw_table); i++) {
+		next_entry = &renesas_fw_table[i];
+		if (next_entry->device == dev->device &&
+		    next_entry->revision == dev->revision &&
+		    next_entry->expected_version > entry->expected_version)
+			return next_entry;
+	}
+
+	return NULL;
+}
+
 static int renesas_fw_download_image(struct pci_dev *dev,
 				     const u32 *fw,
 				     size_t step)
@@ -709,6 +733,7 @@ struct renesas_fw_ctx {
 	struct pci_dev *pdev;
 	const struct pci_device_id *id;
 	bool resume;
+	const struct renesas_fw_entry *entry;
 };
 
 static int xhci_pci_probe(struct pci_dev *pdev,
@@ -968,13 +993,29 @@ static void renesas_fw_callback(const struct firmware *fw,
 	struct renesas_fw_ctx *ctx = context;
 	struct pci_dev *pdev = ctx->pdev;
 	struct device *parent = pdev->dev.parent;
+	const struct renesas_fw_entry *next_entry;
 	bool rom;
 	int err;
 
 	if (!fw) {
 		dev_err(&pdev->dev, "firmware failed to load\n");
-
-		goto cleanup;
+		/*
+		 * we didn't find firmware, check if we have another
+		 * entry for this device
+		 */
+		next_entry = renesas_get_next_entry(ctx->pdev, ctx->entry);
+		if (next_entry) {
+			ctx->entry = next_entry;
+			dev_dbg(&pdev->dev, "Found next entry, requesting: %s\n",
+				next_entry->firmware_name);
+			request_firmware_nowait(THIS_MODULE, 1,
+						next_entry->firmware_name,
+						&pdev->dev, GFP_KERNEL,
+						ctx, renesas_fw_callback);
+			return;
+		} else {
+			goto cleanup;
+		}
 	}
 
 	err = renesas_fw_verify(pdev, fw->data, fw->size);
@@ -1072,6 +1113,7 @@ static int renesas_fw_download_to_hw(struct pci_dev *pdev,
 	ctx->pdev = pdev;
 	ctx->resume = do_resume;
 	ctx->id = id;
+	ctx->entry = entry;
 
 	pci_dev_get(pdev);
 	err = request_firmware_nowait(THIS_MODULE, 1, entry->firmware_name,
-- 
2.20.1


  parent reply index

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-06-21  8:59 [PATCH v2 0/5] usb: xhci: Add support for Renesas USB controllers Vinod Koul
2019-06-21  8:59 ` [PATCH v2 1/5] usb: xhci: add firmware loader for uPD720201 and uPD720202 w/o ROM Vinod Koul
2019-06-21 19:59   ` Christian Lamparter
2019-06-23 16:33     ` Vinod Koul
2019-06-21  8:59 ` [PATCH v2 2/5] usb: xhci: handle " Vinod Koul
2019-06-21 19:53   ` Christian Lamparter
2019-06-23 16:35     ` Vinod Koul
2019-06-21  8:59 ` [PATCH v2 3/5] usb: xhci: Use register defined and field names Vinod Koul
2019-06-21  8:59 ` [PATCH v2 4/5] usb: xhci: Add ROM loader for uPD720201 Vinod Koul
2019-06-21  8:59 ` Vinod Koul [this message]
2019-06-21 19:46   ` [PATCH v2 5/5] usb: xhci: allow multiple firmware versions Christian Lamparter
2019-06-23 16:36     ` Vinod Koul
2019-06-21 19:41 ` [PATCH v2 0/5] usb: xhci: Add support for Renesas USB controllers Christian Lamparter
2019-06-23 16:37   ` Vinod Koul

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190621085913.8722-6-vkoul@kernel.org \
    --to=vkoul@kernel.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=chunkeey@googlemail.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=mathias.nyman@intel.com \
    --cc=yoshihiro.shimoda.uh@renesas.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-ARM-MSM Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-arm-msm/0 linux-arm-msm/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-arm-msm linux-arm-msm/ https://lore.kernel.org/linux-arm-msm \
		linux-arm-msm@vger.kernel.org linux-arm-msm@archiver.kernel.org
	public-inbox-index linux-arm-msm


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-arm-msm


AGPL code for this site: git clone https://public-inbox.org/ public-inbox