From: Luca Weiss <luca@z3ntu.xyz>
To: linux-arm-msm@vger.kernel.org
Cc: ~martijnbraam/pmos-upstream@lists.sr.ht,
Luca Weiss <luca@z3ntu.xyz>, Brian Masney <masneyb@onstation.org>,
Andy Gross <agross@kernel.org>,
David Brown <david.brown@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v2] ARM: dts: msm8974-FP2: add reboot-mode node
Date: Sat, 13 Jul 2019 17:48:06 +0200 [thread overview]
Message-ID: <20190713154805.17159-1-luca@z3ntu.xyz> (raw)
This enables userspace to signal the bootloader to go into the
bootloader or recovery mode.
The magic values can be found in both the downstream kernel and the LK
kernel (bootloader).
Reviewed-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
---
Changes v1 -> v2:
- Move the majority of the node into the board dts, just keep the magic
values in the device-specific dts.
arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts | 10 ++++++++++
arch/arm/boot/dts/qcom-msm8974.dtsi | 11 +++++++++++
2 files changed, 21 insertions(+)
diff --git a/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts b/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts
index 643c57f84818..ff4a3e0aa746 100644
--- a/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts
+++ b/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts
@@ -338,6 +338,16 @@
};
};
};
+
+ imem@fe805000 {
+ status = "okay";
+
+ reboot-mode {
+ mode-normal = <0x77665501>;
+ mode-bootloader = <0x77665500>;
+ mode-recovery = <0x77665502>;
+ };
+ };
};
&spmi_bus {
diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
index 45b5c8ef0374..1927430bded7 100644
--- a/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -1085,6 +1085,17 @@
};
};
};
+
+ imem@fe805000 {
+ status = "disabled";
+ compatible = "syscon", "simple-mfd";
+ reg = <0xfe805000 0x1000>;
+
+ reboot-mode {
+ compatible = "syscon-reboot-mode";
+ offset = <0x65c>;
+ };
+ };
};
smd {
--
2.22.0
reply other threads:[~2019-07-13 15:48 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190713154805.17159-1-luca@z3ntu.xyz \
--to=luca@z3ntu.xyz \
--cc=agross@kernel.org \
--cc=david.brown@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=masneyb@onstation.org \
--cc=robh+dt@kernel.org \
--cc=~martijnbraam/pmos-upstream@lists.sr.ht \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).