Linux-ARM-MSM Archive on lore.kernel.org
 help / color / Atom feed
From: Lina Iyer <ilina@codeaurora.org>
To: agross@kernel.org, bjorn.andersson@linaro.org, swboyd@chromium.org
Cc: linux-arm-msm@vger.kernel.org, linux-soc@vger.kernel.org,
	rnayak@codeaurora.org, linux-kernel@vger.kernel.org,
	linux-pm@vger.kernel.org, dianders@chromium.org,
	mkshah@codeaurora.org, Lina Iyer <ilina@codeaurora.org>
Subject: [PATCH V2 2/4] drivers: qcom: rpmh-rsc: avoid locking in the interrupt handler
Date: Mon, 22 Jul 2019 15:53:38 -0600
Message-ID: <20190722215340.3071-2-ilina@codeaurora.org> (raw)
In-Reply-To: <20190722215340.3071-1-ilina@codeaurora.org>

Avoid locking in the interrupt context to improve latency. Since we
don't lock in the interrupt context, it is possible that we now could
race with the DRV_CONTROL register that writes the enable register and
cleared by the interrupt handler. For fire-n-forget requests, the
interrupt may be raised as soon as the TCS is triggered and the IRQ
handler may clear the enable bit before the DRV_CONTROL is read back.

Use the non-sync variant when enabling the TCS register to avoid reading
back a value that may been cleared because the interrupt handler ran
immediately after triggering the TCS.

Signed-off-by: Lina Iyer <ilina@codeaurora.org>
---
 drivers/soc/qcom/rpmh-rsc.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/drivers/soc/qcom/rpmh-rsc.c b/drivers/soc/qcom/rpmh-rsc.c
index 5ede8d6de3ad..694ba881624e 100644
--- a/drivers/soc/qcom/rpmh-rsc.c
+++ b/drivers/soc/qcom/rpmh-rsc.c
@@ -242,9 +242,7 @@ static irqreturn_t tcs_tx_done(int irq, void *p)
 		write_tcs_reg(drv, RSC_DRV_CMD_ENABLE, i, 0);
 		write_tcs_reg(drv, RSC_DRV_CMD_WAIT_FOR_CMPL, i, 0);
 		write_tcs_reg(drv, RSC_DRV_IRQ_CLEAR, 0, BIT(i));
-		spin_lock(&drv->lock);
 		clear_bit(i, drv->tcs_in_use);
-		spin_unlock(&drv->lock);
 		if (req)
 			rpmh_tx_done(req, err);
 	}
@@ -304,7 +302,7 @@ static void __tcs_trigger(struct rsc_drv *drv, int tcs_id)
 	enable = TCS_AMC_MODE_ENABLE;
 	write_tcs_reg_sync(drv, RSC_DRV_CONTROL, tcs_id, enable);
 	enable |= TCS_AMC_MODE_TRIGGER;
-	write_tcs_reg_sync(drv, RSC_DRV_CONTROL, tcs_id, enable);
+	write_tcs_reg(drv, RSC_DRV_CONTROL, tcs_id, enable);
 }
 
 static int check_for_req_inflight(struct rsc_drv *drv, struct tcs_group *tcs,
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project


  reply index

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-07-22 21:53 [PATCH V2 1/4] drivers: qcom: rpmh-rsc: simplify TCS locking Lina Iyer
2019-07-22 21:53 ` Lina Iyer [this message]
2019-07-23 20:11   ` [PATCH V2 2/4] drivers: qcom: rpmh-rsc: avoid locking in the interrupt handler Stephen Boyd
2019-07-24 14:52     ` Lina Iyer
2019-07-24 19:37       ` Stephen Boyd
2019-07-24 20:36         ` Lina Iyer
2019-07-24 23:27           ` Doug Anderson
2019-07-25 15:18             ` Lina Iyer
2019-07-25 15:39               ` Doug Anderson
2019-07-29 19:01                 ` Lina Iyer
2019-07-29 20:56                   ` Stephen Boyd
2019-07-30 17:29                     ` Lina Iyer
2019-07-22 21:53 ` [PATCH V2 3/4] drivers: qcom: rpmh: switch over from spinlock irq variants Lina Iyer
2019-07-23 18:24   ` Stephen Boyd
2019-07-22 21:53 ` [PATCH V2 4/4] drivers: qcom: rpmh-rsc: remove redundant register access Lina Iyer
2019-07-23 18:22 ` [PATCH V2 1/4] drivers: qcom: rpmh-rsc: simplify TCS locking Stephen Boyd
2019-07-23 19:21   ` Lina Iyer
2019-07-23 20:18     ` Stephen Boyd
2019-07-24 14:54       ` Lina Iyer
2019-07-24 18:32         ` Stephen Boyd
2019-07-24 19:36           ` Lina Iyer

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190722215340.3071-2-ilina@codeaurora.org \
    --to=ilina@codeaurora.org \
    --cc=agross@kernel.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=dianders@chromium.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=linux-soc@vger.kernel.org \
    --cc=mkshah@codeaurora.org \
    --cc=rnayak@codeaurora.org \
    --cc=swboyd@chromium.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-ARM-MSM Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-arm-msm/0 linux-arm-msm/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-arm-msm linux-arm-msm/ https://lore.kernel.org/linux-arm-msm \
		linux-arm-msm@vger.kernel.org linux-arm-msm@archiver.kernel.org
	public-inbox-index linux-arm-msm


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-arm-msm


AGPL code for this site: git clone https://public-inbox.org/ public-inbox