Linux-ARM-MSM Archive on lore.kernel.org
 help / color / Atom feed
From: Niklas Cassel <niklas.cassel@linaro.org>
To: Andy Gross <agross@kernel.org>
Cc: linux-arm-msm@vger.kernel.org, jorge.ramirez-ortiz@linaro.org,
	sboyd@kernel.org, vireshk@kernel.org, bjorn.andersson@linaro.org,
	ulf.hansson@linaro.org, Niklas Cassel <niklas.cassel@linaro.org>,
	Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v2 12/14] arm64: dts: qcom: qcs404: Add CPR and populate OPP table
Date: Thu, 25 Jul 2019 12:41:40 +0200
Message-ID: <20190725104144.22924-13-niklas.cassel@linaro.org> (raw)
In-Reply-To: <20190725104144.22924-1-niklas.cassel@linaro.org>

Add CPR and populate OPP table.

Co-developed-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org>
---
Changes since V1:
-Removed opp-hz from CPR OPP table.

 arch/arm64/boot/dts/qcom/qcs404.dtsi | 142 +++++++++++++++++++++++++--
 1 file changed, 134 insertions(+), 8 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi
index ff9198740431..5519422b762d 100644
--- a/arch/arm64/boot/dts/qcom/qcs404.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi
@@ -38,7 +38,8 @@
 			#cooling-cells = <2>;
 			clocks = <&apcs_glb>;
 			operating-points-v2 = <&cpu_opp_table>;
-			cpu-supply = <&pms405_s3>;
+			power-domains = <&cprpd>;
+			power-domain-names = "cpr";
 		};
 
 		CPU1: cpu@101 {
@@ -51,7 +52,8 @@
 			#cooling-cells = <2>;
 			clocks = <&apcs_glb>;
 			operating-points-v2 = <&cpu_opp_table>;
-			cpu-supply = <&pms405_s3>;
+			power-domains = <&cprpd>;
+			power-domain-names = "cpr";
 		};
 
 		CPU2: cpu@102 {
@@ -64,7 +66,8 @@
 			#cooling-cells = <2>;
 			clocks = <&apcs_glb>;
 			operating-points-v2 = <&cpu_opp_table>;
-			cpu-supply = <&pms405_s3>;
+			power-domains = <&cprpd>;
+			power-domain-names = "cpr";
 		};
 
 		CPU3: cpu@103 {
@@ -77,7 +80,8 @@
 			#cooling-cells = <2>;
 			clocks = <&apcs_glb>;
 			operating-points-v2 = <&cpu_opp_table>;
-			cpu-supply = <&pms405_s3>;
+			power-domains = <&cprpd>;
+			power-domain-names = "cpr";
 		};
 
 		L2_0: l2-cache {
@@ -101,20 +105,37 @@
 	};
 
 	cpu_opp_table: cpu-opp-table {
-		compatible = "operating-points-v2";
+		compatible = "operating-points-v2-kryo-cpu";
 		opp-shared;
 
 		opp-1094400000 {
 			opp-hz = /bits/ 64 <1094400000>;
-			opp-microvolt = <1224000 1224000 1224000>;
+			required-opps = <&cpr_opp1>;
 		};
 		opp-1248000000 {
 			opp-hz = /bits/ 64 <1248000000>;
-			opp-microvolt = <1288000 1288000 1288000>;
+			required-opps = <&cpr_opp2>;
 		};
 		opp-1401600000 {
 			opp-hz = /bits/ 64 <1401600000>;
-			opp-microvolt = <1384000 1384000 1384000>;
+			required-opps = <&cpr_opp3>;
+		};
+	};
+
+	cpr_opp_table: cpr-opp-table {
+		compatible = "operating-points-v2-qcom-level";
+
+		cpr_opp1: opp1 {
+			opp-level = <1>;
+			qcom,opp-fuse-level = <1>;
+		};
+		cpr_opp2: opp2 {
+			opp-level = <2>;
+			qcom,opp-fuse-level = <2>;
+		};
+		cpr_opp3: opp3 {
+			opp-level = <3>;
+			qcom,opp-fuse-level = <3>;
 		};
 	};
 
@@ -294,6 +315,62 @@
 			tsens_caldata: caldata@d0 {
 				reg = <0x1f8 0x14>;
 			};
+			cpr_efuse_speedbin: speedbin@13c {
+				reg = <0x13c 0x4>;
+				bits = <2 3>;
+			};
+			cpr_efuse_quot_offset1: qoffset1@231 {
+				reg = <0x231 0x4>;
+				bits = <4 7>;
+			};
+			cpr_efuse_quot_offset2: qoffset2@232 {
+				reg = <0x232 0x4>;
+				bits = <3 7>;
+			};
+			cpr_efuse_quot_offset3: qoffset3@233 {
+				reg = <0x233 0x4>;
+				bits = <2 7>;
+			};
+			cpr_efuse_init_voltage1: ivoltage1@229 {
+				reg = <0x229 0x4>;
+				bits = <4 6>;
+			};
+			cpr_efuse_init_voltage2: ivoltage2@22a {
+				reg = <0x22a 0x4>;
+				bits = <2 6>;
+			};
+			cpr_efuse_init_voltage3: ivoltage3@22b {
+				reg = <0x22b 0x4>;
+				bits = <0 6>;
+			};
+			cpr_efuse_quot1: quot1@22b {
+				reg = <0x22b 0x4>;
+				bits = <6 12>;
+			};
+			cpr_efuse_quot2: quot2@22d {
+				reg = <0x22d 0x4>;
+				bits = <2 12>;
+			};
+			cpr_efuse_quot3: quot3@230 {
+				reg = <0x230 0x4>;
+				bits = <0 12>;
+			};
+			cpr_efuse_ring1: ring1@228 {
+				reg = <0x228 0x4>;
+				bits = <0 3>;
+			};
+			cpr_efuse_ring2: ring2@228 {
+				reg = <0x228 0x4>;
+				bits = <4 3>;
+			};
+			cpr_efuse_ring3: ring3@229 {
+				reg = <0x229 0x4>;
+				bits = <0 3>;
+			};
+			cpr_efuse_revision: revision@218 {
+				reg = <0x218 0x4>;
+				bits = <3 3>;
+			};
 		};
 
 		rng: rng@e3000 {
@@ -901,6 +978,55 @@
 			clock-names = "xo";
 		};
 
+		cprpd: cpr@b018000 {
+			compatible = "qcom,qcs404-cpr", "qcom,cpr";
+			reg = <0x0b018000 0x1000>;
+			interrupts = <0 15 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&xo_board>;
+			clock-names = "ref";
+			vdd-apc-supply = <&pms405_s3>;
+			#power-domain-cells = <0>;
+			operating-points-v2 = <&cpr_opp_table>;
+			acc-syscon = <&tcsr>;
+
+			nvmem-cells = <&cpr_efuse_quot_offset1>,
+				<&cpr_efuse_quot_offset2>,
+				<&cpr_efuse_quot_offset3>,
+				<&cpr_efuse_init_voltage1>,
+				<&cpr_efuse_init_voltage2>,
+				<&cpr_efuse_init_voltage3>,
+				<&cpr_efuse_quot1>,
+				<&cpr_efuse_quot2>,
+				<&cpr_efuse_quot3>,
+				<&cpr_efuse_ring1>,
+				<&cpr_efuse_ring2>,
+				<&cpr_efuse_ring3>,
+				<&cpr_efuse_revision>;
+			nvmem-cell-names = "cpr_quotient_offset1",
+				"cpr_quotient_offset2",
+				"cpr_quotient_offset3",
+				"cpr_init_voltage1",
+				"cpr_init_voltage2",
+				"cpr_init_voltage3",
+				"cpr_quotient1",
+				"cpr_quotient2",
+				"cpr_quotient3",
+				"cpr_ring_osc1",
+				"cpr_ring_osc2",
+				"cpr_ring_osc3",
+				"cpr_fuse_revision";
+
+			qcom,cpr-timer-delay-us = <5000>;
+			qcom,cpr-timer-cons-up = <0>;
+			qcom,cpr-timer-cons-down = <2>;
+			qcom,cpr-up-threshold = <1>;
+			qcom,cpr-down-threshold = <3>;
+			qcom,cpr-idle-clocks = <15>;
+			qcom,cpr-gcnt-us = <1>;
+			qcom,vdd-apc-step-up-limit = <1>;
+			qcom,vdd-apc-step-down-limit = <1>;
+		};
+
 		timer@b120000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
-- 
2.21.0


  parent reply index

Thread overview: 31+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-07-25 10:41 [PATCH v2 00/14] Add support for QCOM Core Power Reduction Niklas Cassel
2019-07-25 10:41 ` [PATCH v2 01/14] opp: Add dev_pm_opp_find_level_exact() Niklas Cassel
2019-07-26  8:03   ` Viresh Kumar
2019-07-25 10:41 ` [PATCH v2 02/14] dt-bindings: cpufreq: Re-organise kryo cpufreq to use it for other nvmem based qcom socs Niklas Cassel
2019-07-26  8:04   ` Viresh Kumar
2019-07-25 10:41 ` [PATCH v2 03/14] cpufreq: qcom: " Niklas Cassel
2019-08-18  1:06   ` Stephen Boyd
2019-07-25 10:41 ` [PATCH v2 04/14] dt-bindings: cpufreq: qcom-nvmem: Make speedbin related properties optional Niklas Cassel
2019-07-25 10:41 ` [PATCH v2 05/14] cpufreq: qcom: Refactor the driver to make it easier to extend Niklas Cassel
2019-07-25 10:41 ` [PATCH v2 06/14] dt-bindings: cpufreq: qcom-nvmem: Support pstates provided by a power domain Niklas Cassel
2019-08-16 21:21   ` Rob Herring
2019-08-19 10:09   ` [PATCH v3 " Niklas Cassel
2019-08-19 17:59     ` Stephen Boyd
2019-08-22 10:27       ` Niklas Cassel
2019-08-28 17:52         ` Stephen Boyd
2019-08-30 10:29     ` [PATCH v4 06/14] dt-bindings: opp: " Niklas Cassel
2019-07-25 10:41 ` [PATCH v2 07/14] cpufreq: qcom: Add support for qcs404 on nvmem driver Niklas Cassel
2019-07-25 10:41 ` [PATCH v2 08/14] cpufreq: Add qcs404 to cpufreq-dt-platdev blacklist Niklas Cassel
2019-07-25 10:41 ` [PATCH v2 09/14] dt-bindings: opp: Add qcom-opp bindings with properties needed for CPR Niklas Cassel
2019-08-19 10:12   ` [PATCH v3 " Niklas Cassel
2019-08-19 17:58     ` Stephen Boyd
2019-08-23 12:34     ` Rob Herring
2019-07-25 10:41 ` [PATCH v2 10/14] dt-bindings: power: avs: Add support for CPR (Core Power Reduction) Niklas Cassel
2019-08-17  6:14   ` Stephen Boyd
2019-08-22 10:20     ` Niklas Cassel
2019-07-25 10:41 ` [PATCH v2 11/14] " Niklas Cassel
2019-08-18  1:04   ` Stephen Boyd
2019-07-25 10:41 ` Niklas Cassel [this message]
2019-07-25 10:41 ` [PATCH v2 13/14] arm64: defconfig: enable CONFIG_QCOM_CPR Niklas Cassel
2019-07-25 10:41 ` [PATCH v2 14/14] arm64: defconfig: enable CONFIG_ARM_QCOM_CPUFREQ_NVMEM Niklas Cassel
2019-07-26  8:08 ` [PATCH v2 00/14] Add support for QCOM Core Power Reduction Viresh Kumar

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190725104144.22924-13-niklas.cassel@linaro.org \
    --to=niklas.cassel@linaro.org \
    --cc=agross@kernel.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=jorge.ramirez-ortiz@linaro.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=sboyd@kernel.org \
    --cc=ulf.hansson@linaro.org \
    --cc=vireshk@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-ARM-MSM Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-arm-msm/0 linux-arm-msm/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-arm-msm linux-arm-msm/ https://lore.kernel.org/linux-arm-msm \
		linux-arm-msm@vger.kernel.org linux-arm-msm@archiver.kernel.org
	public-inbox-index linux-arm-msm

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-arm-msm


AGPL code for this site: git clone https://public-inbox.org/ public-inbox