Linux-ARM-MSM Archive on lore.kernel.org
 help / color / Atom feed
From: Vinod Koul <vkoul@kernel.org>
To: Mark Brown <broonie@kernel.org>
Cc: linux-arm-msm@vger.kernel.org,
	Bjorn Andersson <bjorn.andersson@linaro.org>,
	Vinod Koul <vkoul@kernel.org>, Andy Gross <agross@kernel.org>,
	Liam Girdwood <lgirdwood@gmail.com>,
	Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	linux-kernel@vger.kernel.org, devicetree@vger.kernel.org
Subject: [PATCH 4/4] regulator: qcom-rpmh: Update PMIC modes for PMIC5
Date: Fri,  9 Aug 2019 13:06:16 +0530
Message-ID: <20190809073616.1235-4-vkoul@kernel.org> (raw)
In-Reply-To: <20190809073616.1235-1-vkoul@kernel.org>

Add the PMIC5 modes and use them pmic5 ldo and smps

Signed-off-by: Vinod Koul <vkoul@kernel.org>
---
 drivers/regulator/qcom-rpmh-regulator.c | 52 +++++++++++++++++++++----
 1 file changed, 45 insertions(+), 7 deletions(-)

diff --git a/drivers/regulator/qcom-rpmh-regulator.c b/drivers/regulator/qcom-rpmh-regulator.c
index 391ed844a251..db6c085da65e 100644
--- a/drivers/regulator/qcom-rpmh-regulator.c
+++ b/drivers/regulator/qcom-rpmh-regulator.c
@@ -50,6 +50,20 @@ enum rpmh_regulator_type {
 #define PMIC4_BOB_MODE_AUTO			2
 #define PMIC4_BOB_MODE_PWM			3
 
+#define PMIC5_LDO_MODE_RETENTION		3
+#define PMIC5_LDO_MODE_LPM			4
+#define PMIC5_LDO_MODE_HPM			7
+
+#define PMIC5_SMPS_MODE_RETENTION		3
+#define PMIC5_SMPS_MODE_PFM			4
+#define PMIC5_SMPS_MODE_AUTO			6
+#define PMIC5_SMPS_MODE_PWM			7
+
+#define PMIC5_BOB_MODE_PASS			2
+#define PMIC5_BOB_MODE_PFM			4
+#define PMIC5_BOB_MODE_AUTO			6
+#define PMIC5_BOB_MODE_PWM			7
+
 /**
  * struct rpmh_vreg_hw_data - RPMh regulator hardware configurations
  * @regulator_type:		RPMh accelerator type used to manage this
@@ -488,6 +502,14 @@ static const int pmic_mode_map_pmic4_ldo[REGULATOR_MODE_STANDBY + 1] = {
 	[REGULATOR_MODE_FAST]    = -EINVAL,
 };
 
+static const int pmic_mode_map_pmic5_ldo[REGULATOR_MODE_STANDBY + 1] = {
+	[REGULATOR_MODE_INVALID] = -EINVAL,
+	[REGULATOR_MODE_STANDBY] = PMIC5_LDO_MODE_RETENTION,
+	[REGULATOR_MODE_IDLE]    = PMIC5_LDO_MODE_LPM,
+	[REGULATOR_MODE_NORMAL]  = PMIC5_LDO_MODE_HPM,
+	[REGULATOR_MODE_FAST]    = -EINVAL,
+};
+
 static unsigned int rpmh_regulator_pmic4_ldo_of_map_mode(unsigned int rpmh_mode)
 {
 	unsigned int mode;
@@ -518,6 +540,14 @@ static const int pmic_mode_map_pmic4_smps[REGULATOR_MODE_STANDBY + 1] = {
 	[REGULATOR_MODE_FAST]    = PMIC4_SMPS_MODE_PWM,
 };
 
+static const int pmic_mode_map_pmic5_smps[REGULATOR_MODE_STANDBY + 1] = {
+	[REGULATOR_MODE_INVALID] = -EINVAL,
+	[REGULATOR_MODE_STANDBY] = PMIC5_SMPS_MODE_RETENTION,
+	[REGULATOR_MODE_IDLE]    = PMIC5_SMPS_MODE_PFM,
+	[REGULATOR_MODE_NORMAL]  = PMIC5_SMPS_MODE_AUTO,
+	[REGULATOR_MODE_FAST]    = PMIC5_SMPS_MODE_PWM,
+};
+
 static unsigned int
 rpmh_regulator_pmic4_smps_of_map_mode(unsigned int rpmh_mode)
 {
@@ -552,6 +582,14 @@ static const int pmic_mode_map_pmic4_bob[REGULATOR_MODE_STANDBY + 1] = {
 	[REGULATOR_MODE_FAST]    = PMIC4_BOB_MODE_PWM,
 };
 
+static const int pmic_mode_map_pmic5_bob[REGULATOR_MODE_STANDBY + 1] = {
+	[REGULATOR_MODE_INVALID] = -EINVAL,
+	[REGULATOR_MODE_STANDBY] = -EINVAL,
+	[REGULATOR_MODE_IDLE]    = PMIC5_BOB_MODE_PFM,
+	[REGULATOR_MODE_NORMAL]  = PMIC5_BOB_MODE_AUTO,
+	[REGULATOR_MODE_FAST]    = PMIC5_BOB_MODE_PWM,
+};
+
 static unsigned int rpmh_regulator_pmic4_bob_of_map_mode(unsigned int rpmh_mode)
 {
 	unsigned int mode;
@@ -643,7 +681,7 @@ static const struct rpmh_vreg_hw_data pmic5_pldo = {
 	.voltage_range = REGULATOR_LINEAR_RANGE(1504000, 0, 255, 8000),
 	.n_voltages = 256,
 	.hpm_min_load_uA = 10000,
-	.pmic_mode_map = pmic_mode_map_pmic4_ldo,
+	.pmic_mode_map = pmic_mode_map_pmic5_ldo,
 	.of_map_mode = rpmh_regulator_pmic4_ldo_of_map_mode,
 };
 
@@ -653,7 +691,7 @@ static const struct rpmh_vreg_hw_data pmic5_pldo_lv = {
 	.voltage_range = REGULATOR_LINEAR_RANGE(1504000, 0, 62, 8000),
 	.n_voltages = 63,
 	.hpm_min_load_uA = 10000,
-	.pmic_mode_map = pmic_mode_map_pmic4_ldo,
+	.pmic_mode_map = pmic_mode_map_pmic5_ldo,
 	.of_map_mode = rpmh_regulator_pmic4_ldo_of_map_mode,
 };
 
@@ -663,7 +701,7 @@ static const struct rpmh_vreg_hw_data pmic5_nldo = {
 	.voltage_range = REGULATOR_LINEAR_RANGE(320000, 0, 123, 8000),
 	.n_voltages = 124,
 	.hpm_min_load_uA = 30000,
-	.pmic_mode_map = pmic_mode_map_pmic4_ldo,
+	.pmic_mode_map = pmic_mode_map_pmic5_ldo,
 	.of_map_mode = rpmh_regulator_pmic4_ldo_of_map_mode,
 };
 
@@ -672,7 +710,7 @@ static const struct rpmh_vreg_hw_data pmic5_hfsmps510 = {
 	.ops = &rpmh_regulator_vrm_ops,
 	.voltage_range = REGULATOR_LINEAR_RANGE(320000, 0, 215, 8000),
 	.n_voltages = 216,
-	.pmic_mode_map = pmic_mode_map_pmic4_smps,
+	.pmic_mode_map = pmic_mode_map_pmic5_smps,
 	.of_map_mode = rpmh_regulator_pmic4_smps_of_map_mode,
 };
 
@@ -681,7 +719,7 @@ static const struct rpmh_vreg_hw_data pmic5_ftsmps510 = {
 	.ops = &rpmh_regulator_vrm_ops,
 	.voltage_range = REGULATOR_LINEAR_RANGE(300000, 0, 263, 4000),
 	.n_voltages = 264,
-	.pmic_mode_map = pmic_mode_map_pmic4_smps,
+	.pmic_mode_map = pmic_mode_map_pmic5_smps,
 	.of_map_mode = rpmh_regulator_pmic4_smps_of_map_mode,
 };
 
@@ -690,7 +728,7 @@ static const struct rpmh_vreg_hw_data pmic5_hfsmps515 = {
 	.ops = &rpmh_regulator_vrm_ops,
 	.voltage_range = REGULATOR_LINEAR_RANGE(2800000, 0, 4, 1600),
 	.n_voltages = 5,
-	.pmic_mode_map = pmic_mode_map_pmic4_smps,
+	.pmic_mode_map = pmic_mode_map_pmic5_smps,
 	.of_map_mode = rpmh_regulator_pmic4_smps_of_map_mode,
 };
 
@@ -699,7 +737,7 @@ static const struct rpmh_vreg_hw_data pmic5_bob = {
 	.ops = &rpmh_regulator_vrm_bypass_ops,
 	.voltage_range = REGULATOR_LINEAR_RANGE(300000, 0, 135, 32000),
 	.n_voltages = 136,
-	.pmic_mode_map = pmic_mode_map_pmic4_bob,
+	.pmic_mode_map = pmic_mode_map_pmic5_bob,
 	.of_map_mode = rpmh_regulator_pmic4_bob_of_map_mode,
 };
 
-- 
2.20.1


  parent reply index

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-08-09  7:36 [PATCH 1/4] regulator: dt-bindings: Sort the compatibles and nodes Vinod Koul
2019-08-09  7:36 ` [PATCH 2/4] regulator: qcom-rpmh: Sort the compatibles Vinod Koul
2019-08-09 12:31   ` Applied "regulator: qcom-rpmh: Sort the compatibles" to the regulator tree Mark Brown
2019-08-09 17:02   ` [PATCH 2/4] regulator: qcom-rpmh: Sort the compatibles Bjorn Andersson
2019-08-09  7:36 ` [PATCH 3/4] regulator: qcom-rpmh: Fix pmic5_bob voltage count Vinod Koul
2019-08-09 12:31   ` Applied "regulator: qcom-rpmh: Fix pmic5_bob voltage count" to the regulator tree Mark Brown
2019-08-09 17:03   ` [PATCH 3/4] regulator: qcom-rpmh: Fix pmic5_bob voltage count Bjorn Andersson
2019-08-09  7:36 ` Vinod Koul [this message]
2019-08-09 12:31   ` Applied "regulator: qcom-rpmh: Update PMIC modes for PMIC5" to the regulator tree Mark Brown
2019-08-09 18:00   ` [PATCH 4/4] regulator: qcom-rpmh: Update PMIC modes for PMIC5 Bjorn Andersson
2019-08-09 12:31 ` Applied "regulator: dt-bindings: Sort the compatibles and nodes" to the regulator tree Mark Brown
2019-08-09 17:01 ` [PATCH 1/4] regulator: dt-bindings: Sort the compatibles and nodes Bjorn Andersson

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190809073616.1235-4-vkoul@kernel.org \
    --to=vkoul@kernel.org \
    --cc=agross@kernel.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=broonie@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=lgirdwood@gmail.com \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-ARM-MSM Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-arm-msm/0 linux-arm-msm/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-arm-msm linux-arm-msm/ https://lore.kernel.org/linux-arm-msm \
		linux-arm-msm@vger.kernel.org linux-arm-msm@archiver.kernel.org
	public-inbox-index linux-arm-msm

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-arm-msm


AGPL code for this site: git clone https://public-inbox.org/ public-inbox