Linux-ARM-MSM Archive on lore.kernel.org
 help / color / Atom feed
From: Mark Brown <broonie@kernel.org>
To: Vinod Koul <vkoul@kernel.org>
Cc: Andy Gross <agross@kernel.org>,
	Bjorn Andersson <bjorn.andersson@linaro.org>,
	devicetree@vger.kernel.org, Liam Girdwood <lgirdwood@gmail.com>,
	linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org,
	Mark Brown <broonie@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Rob Herring <robh+dt@kernel.org>
Subject: Applied "regulator: dt-bindings: Sort the compatibles and nodes" to the regulator tree
Date: Fri,  9 Aug 2019 13:31:58 +0100 (BST)
Message-ID: <20190809123158.92D87274303D@ypsilon.sirena.org.uk> (raw)
In-Reply-To: <20190809073616.1235-1-vkoul@kernel.org>

The patch

   regulator: dt-bindings: Sort the compatibles and nodes

has been applied to the regulator tree at

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-5.4

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.  

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

From c6e20fa49818381dfa7288fad4c33b84408aab54 Mon Sep 17 00:00:00 2001
From: Vinod Koul <vkoul@kernel.org>
Date: Fri, 9 Aug 2019 13:06:13 +0530
Subject: [PATCH] regulator: dt-bindings: Sort the compatibles and nodes

It helps to keep sorted order for compatibles and nodes, so sort them

Suggested-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20190809073616.1235-1-vkoul@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 .../regulator/qcom,rpmh-regulator.txt         | 19 ++++++++++---------
 1 file changed, 10 insertions(+), 9 deletions(-)

diff --git a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.txt b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.txt
index 1a9cab50503a..bab9f71140b8 100644
--- a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.txt
@@ -22,12 +22,12 @@ RPMh resource.
 
 The names used for regulator nodes must match those supported by a given PMIC.
 Supported regulator node names:
-	PM8998:		smps1 - smps13, ldo1 - ldo28, lvs1 - lvs2
-	PMI8998:	bob
 	PM8005:		smps1 - smps4
+	PM8009:		smps1 - smps2, ldo1 - ldo7
 	PM8150:		smps1 - smps10, ldo1 - ldo18
 	PM8150L:	smps1 - smps8, ldo1 - ldo11, bob, flash, rgb
-	PM8009:		smps1 - smps2, ld01 - ldo7
+	PM8998:		smps1 - smps13, ldo1 - ldo28, lvs1 - lvs2
+	PMI8998:	bob
 
 ========================
 First Level Nodes - PMIC
@@ -36,12 +36,13 @@ First Level Nodes - PMIC
 - compatible
 	Usage:      required
 	Value type: <string>
-	Definition: Must be one of: "qcom,pm8998-rpmh-regulators",
-		    "qcom,pmi8998-rpmh-regulators" or
-		    "qcom,pm8005-rpmh-regulators" or
-		    "qcom,pm8150-rpmh-regulators" or
-		    "qcom,pm8150l-rpmh-regulators" or
-		    "qcom,pm8009-rpmh-regulators".
+	Definition: Must be one of below:
+		    "qcom,pm8005-rpmh-regulators"
+		    "qcom,pm8009-rpmh-regulators"
+		    "qcom,pm8150-rpmh-regulators"
+		    "qcom,pm8150l-rpmh-regulators"
+		    "qcom,pm8998-rpmh-regulators"
+		    "qcom,pmi8998-rpmh-regulators"
 
 - qcom,pmic-id
 	Usage:      required
-- 
2.20.1


  parent reply index

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-08-09  7:36 [PATCH 1/4] regulator: dt-bindings: Sort the compatibles and nodes Vinod Koul
2019-08-09  7:36 ` [PATCH 2/4] regulator: qcom-rpmh: Sort the compatibles Vinod Koul
2019-08-09 12:31   ` Applied "regulator: qcom-rpmh: Sort the compatibles" to the regulator tree Mark Brown
2019-08-09 17:02   ` [PATCH 2/4] regulator: qcom-rpmh: Sort the compatibles Bjorn Andersson
2019-08-09  7:36 ` [PATCH 3/4] regulator: qcom-rpmh: Fix pmic5_bob voltage count Vinod Koul
2019-08-09 12:31   ` Applied "regulator: qcom-rpmh: Fix pmic5_bob voltage count" to the regulator tree Mark Brown
2019-08-09 17:03   ` [PATCH 3/4] regulator: qcom-rpmh: Fix pmic5_bob voltage count Bjorn Andersson
2019-08-09  7:36 ` [PATCH 4/4] regulator: qcom-rpmh: Update PMIC modes for PMIC5 Vinod Koul
2019-08-09 12:31   ` Applied "regulator: qcom-rpmh: Update PMIC modes for PMIC5" to the regulator tree Mark Brown
2019-08-09 18:00   ` [PATCH 4/4] regulator: qcom-rpmh: Update PMIC modes for PMIC5 Bjorn Andersson
2019-08-09 12:31 ` Mark Brown [this message]
2019-08-09 17:01 ` [PATCH 1/4] regulator: dt-bindings: Sort the compatibles and nodes Bjorn Andersson

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190809123158.92D87274303D@ypsilon.sirena.org.uk \
    --to=broonie@kernel.org \
    --cc=agross@kernel.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=lgirdwood@gmail.com \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=vkoul@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-ARM-MSM Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-arm-msm/0 linux-arm-msm/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-arm-msm linux-arm-msm/ https://lore.kernel.org/linux-arm-msm \
		linux-arm-msm@vger.kernel.org linux-arm-msm@archiver.kernel.org
	public-inbox-index linux-arm-msm

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-arm-msm


AGPL code for this site: git clone https://public-inbox.org/ public-inbox