From: Vinod Koul <vkoul@kernel.org>
To: Andy Gross <agross@kernel.org>
Cc: linux-arm-msm@vger.kernel.org,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Vinod Koul <vkoul@kernel.org>, Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Stephen Boyd <sboyd@kernel.org>,
Sibi Sankar <sibis@codeaurora.org>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v3 5/8] arm64: dts: qcom: sm8150-mtp: add base dts file
Date: Tue, 20 Aug 2019 22:53:48 +0530
Message-ID: <20190820172351.24145-7-vkoul@kernel.org> (raw)
In-Reply-To: <20190820172351.24145-1-vkoul@kernel.org>
This add base DTS file for sm8150-mtp and enables boot to console, adds
tlmm reserved range, resin node, volume down key and also includes pmic
file.
Signed-off-by: Vinod Koul <vkoul@kernel.org>
---
arch/arm64/boot/dts/qcom/Makefile | 1 +
arch/arm64/boot/dts/qcom/sm8150-mtp.dts | 51 +++++++++++++++++++++++++
2 files changed, 52 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/sm8150-mtp.dts
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 0a7e5dfce6f7..1964dacaf19b 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -12,5 +12,6 @@ dtb-$(CONFIG_ARCH_QCOM) += sdm845-cheza-r2.dtb
dtb-$(CONFIG_ARCH_QCOM) += sdm845-cheza-r3.dtb
dtb-$(CONFIG_ARCH_QCOM) += sdm845-db845c.dtb
dtb-$(CONFIG_ARCH_QCOM) += sdm845-mtp.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sm8150-mtp.dtb
dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-1000.dtb
dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-4000.dtb
diff --git a/arch/arm64/boot/dts/qcom/sm8150-mtp.dts b/arch/arm64/boot/dts/qcom/sm8150-mtp.dts
new file mode 100644
index 000000000000..6f5777f530ae
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8150-mtp.dts
@@ -0,0 +1,51 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2019, Linaro Limited
+ */
+
+/dts-v1/;
+
+#include "sm8150.dtsi"
+#include "pm8150.dtsi"
+#include "pm8150b.dtsi"
+#include "pm8150l.dtsi"
+
+/ {
+ model = "Qualcomm Technologies, Inc. SM8150 MTP";
+ compatible = "qcom,sm8150-mtp";
+
+ aliases {
+ serial0 = &uart2;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&qupv3_id_1 {
+ status = "okay";
+};
+
+&pon {
+ pwrkey {
+ status = "okay";
+ };
+
+ resin {
+ compatible = "qcom,pm8941-resin";
+ interrupts = <0x0 0x8 0x1 IRQ_TYPE_EDGE_BOTH>;
+ debounce = <15625>;
+ bias-pull-up;
+ linux,code = <KEY_VOLUMEDOWN>;
+ };
+};
+
+&tlmm {
+ gpio-reserved-ranges = <0 4>, <126 4>;
+};
+
+&uart2 {
+ status = "okay";
+};
--
2.20.1
next prev parent reply index
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-20 17:23 [PATCH v3 0/8] arm64: dts: qcom: sm8150: Add SM8150 DTS Vinod Koul
2019-08-20 17:23 ` [PATCH v3 1/8] arm64: dts: qcom: sm8150: Add base dts file Vinod Koul
2019-08-20 17:23 ` [PATCH v3 2/8] arm64: dts: qcom: pm8150: " Vinod Koul
2019-08-20 17:23 ` [PATCH v3 3/8] arm64: dts: qcom: pm8150b: " Vinod Koul
2019-08-20 17:23 ` [PATCH v3 4/8] arm64: dts: qcom: pm8150l: " Vinod Koul
2019-08-20 17:23 ` [PATCH v3 5/8] arm64: dts: qcom: sm8150-mtp: " Vinod Koul
2019-08-20 17:23 ` Vinod Koul [this message]
2019-08-21 8:28 ` [PATCH v3 5/8] arm64: dts: qcom: sm8150-mtp: add " Amit Kucheria
2019-08-20 17:23 ` [PATCH v3 6/8] arm64: dts: qcom: sm8150-mtp: Add regulators Vinod Koul
2019-08-20 17:23 ` [PATCH v3 7/8] arm64: dts: qcom: sm8150: Add reserved-memory regions Vinod Koul
2019-08-20 17:23 ` [PATCH v3 8/8] arm64: dts: qcom: sm8150: Add apps shared nodes Vinod Koul
2019-08-21 8:43 ` Amit Kucheria
2019-08-21 18:03 ` Vinod Koul
2019-08-21 9:06 ` [PATCH v3 0/8] arm64: dts: qcom: sm8150: Add SM8150 DTS Niklas Cassel
Reply instructions:
You may reply publically to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190820172351.24145-7-vkoul@kernel.org \
--to=vkoul@kernel.org \
--cc=agross@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
--cc=sboyd@kernel.org \
--cc=sibis@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Linux-ARM-MSM Archive on lore.kernel.org
Archives are clonable:
git clone --mirror https://lore.kernel.org/linux-arm-msm/0 linux-arm-msm/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 linux-arm-msm linux-arm-msm/ https://lore.kernel.org/linux-arm-msm \
linux-arm-msm@vger.kernel.org
public-inbox-index linux-arm-msm
Example config snippet for mirrors
Newsgroup available over NNTP:
nntp://nntp.lore.kernel.org/org.kernel.vger.linux-arm-msm
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git