Linux-ARM-MSM Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH v2 0/2] firmware: selftest for request_firmware_into_buf
@ 2019-08-22 18:40 Scott Branden
  2019-08-22 18:40 ` [PATCH v2 1/2] test_firmware: add support " Scott Branden
  2019-08-22 18:40 ` [PATCH v2 2/2] selftests: firmware: Add request_firmware_into_buf tests Scott Branden
  0 siblings, 2 replies; 3+ messages in thread
From: Scott Branden @ 2019-08-22 18:40 UTC (permalink / raw)
  To: Luis Chamberlain, Greg Kroah-Hartman, David Brown,
	Alexander Viro, Shuah Khan, bjorn.andersson
  Cc: Rafael J . Wysocki, linux-kernel, linux-arm-msm, linux-fsdevel,
	BCM Kernel Feedback, Olof Johansson, Andrew Morton,
	Dan Carpenter, Colin Ian King, Kees Cook, Takashi Iwai,
	linux-kselftest, Scott Branden

This patch series adds kernel selftest of request_firmware_into_buf.
The API was added to the kernel previously untested.

Changes from v1:
- Dropped demonstration patch for a race condition discovered
while testing request_firmare_into_buf.
The new test exposes a kernel opps with the firmware fallback mechanism that may
be fixed separate from these tests.
- minor whitespace formatting in patch
- added Ack's
- added "s" in commit message (changed selftest: to selftests:)

Scott Branden (2):
  test_firmware: add support for request_firmware_into_buf
  selftests: firmware: Add request_firmware_into_buf tests

 lib/test_firmware.c                           | 50 +++++++++++++++-
 .../selftests/firmware/fw_filesystem.sh       | 57 ++++++++++++++++++-
 tools/testing/selftests/firmware/fw_lib.sh    | 11 ++++
 3 files changed, 114 insertions(+), 4 deletions(-)

-- 
2.17.1


^ permalink raw reply	[flat|nested] 3+ messages in thread

* [PATCH v2 1/2] test_firmware: add support for request_firmware_into_buf
  2019-08-22 18:40 [PATCH v2 0/2] firmware: selftest for request_firmware_into_buf Scott Branden
@ 2019-08-22 18:40 ` " Scott Branden
  2019-08-22 18:40 ` [PATCH v2 2/2] selftests: firmware: Add request_firmware_into_buf tests Scott Branden
  1 sibling, 0 replies; 3+ messages in thread
From: Scott Branden @ 2019-08-22 18:40 UTC (permalink / raw)
  To: Luis Chamberlain, Greg Kroah-Hartman, David Brown,
	Alexander Viro, Shuah Khan, bjorn.andersson
  Cc: Rafael J . Wysocki, linux-kernel, linux-arm-msm, linux-fsdevel,
	BCM Kernel Feedback, Olof Johansson, Andrew Morton,
	Dan Carpenter, Colin Ian King, Kees Cook, Takashi Iwai,
	linux-kselftest, Scott Branden

Add test config into_buf to allow request_firmware_into_buf to be
called instead of request_firmware/request_firmware_direct.  The number
of parameters differ calling request_firmware_into_buf and support
has not been added to test such api in test_firmware until now.

Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
---
 lib/test_firmware.c | 50 +++++++++++++++++++++++++++++++++++++++++++--
 1 file changed, 48 insertions(+), 2 deletions(-)

diff --git a/lib/test_firmware.c b/lib/test_firmware.c
index 6ca97a63b3d6..251213c872b5 100644
--- a/lib/test_firmware.c
+++ b/lib/test_firmware.c
@@ -18,6 +18,7 @@
 #include <linux/device.h>
 #include <linux/fs.h>
 #include <linux/miscdevice.h>
+#include <linux/sizes.h>
 #include <linux/slab.h>
 #include <linux/uaccess.h>
 #include <linux/delay.h>
@@ -26,6 +27,7 @@
 
 #define TEST_FIRMWARE_NAME	"test-firmware.bin"
 #define TEST_FIRMWARE_NUM_REQS	4
+#define TEST_FIRMWARE_BUF_SIZE	SZ_1K
 
 static DEFINE_MUTEX(test_fw_mutex);
 static const struct firmware *test_firmware;
@@ -45,6 +47,8 @@ struct test_batched_req {
  * test_config - represents configuration for the test for different triggers
  *
  * @name: the name of the firmware file to look for
+ * @into_buf: when the into_buf is used if this is true
+ *	request_firmware_into_buf() will be used instead.
  * @sync_direct: when the sync trigger is used if this is true
  *	request_firmware_direct() will be used instead.
  * @send_uevent: whether or not to send a uevent for async requests
@@ -83,6 +87,7 @@ struct test_batched_req {
  */
 struct test_config {
 	char *name;
+	bool into_buf;
 	bool sync_direct;
 	bool send_uevent;
 	u8 num_requests;
@@ -176,6 +181,7 @@ static int __test_firmware_config_init(void)
 
 	test_fw_config->num_requests = TEST_FIRMWARE_NUM_REQS;
 	test_fw_config->send_uevent = true;
+	test_fw_config->into_buf = false;
 	test_fw_config->sync_direct = false;
 	test_fw_config->req_firmware = request_firmware;
 	test_fw_config->test_result = 0;
@@ -244,6 +250,9 @@ static ssize_t config_show(struct device *dev,
 			test_fw_config->send_uevent ?
 			"FW_ACTION_HOTPLUG" :
 			"FW_ACTION_NOHOTPLUG");
+	len += scnprintf(buf+len, PAGE_SIZE - len,
+			"into_buf:\t\t%s\n",
+			test_fw_config->into_buf ? "true" : "false");
 	len += scnprintf(buf+len, PAGE_SIZE - len,
 			"sync_direct:\t\t%s\n",
 			test_fw_config->sync_direct ? "true" : "false");
@@ -393,6 +402,23 @@ static ssize_t config_num_requests_show(struct device *dev,
 }
 static DEVICE_ATTR_RW(config_num_requests);
 
+static ssize_t config_into_buf_store(struct device *dev,
+				     struct device_attribute *attr,
+				     const char *buf, size_t count)
+{
+	return test_dev_config_update_bool(buf,
+					   count,
+					   &test_fw_config->into_buf);
+}
+
+static ssize_t config_into_buf_show(struct device *dev,
+				    struct device_attribute *attr,
+				    char *buf)
+{
+	return test_dev_config_show_bool(buf, test_fw_config->into_buf);
+}
+static DEVICE_ATTR_RW(config_into_buf);
+
 static ssize_t config_sync_direct_store(struct device *dev,
 					struct device_attribute *attr,
 					const char *buf, size_t count)
@@ -522,7 +548,7 @@ static ssize_t trigger_async_request_store(struct device *dev,
 		rc = count;
 	} else {
 		pr_err("failed to async load firmware\n");
-		rc = -ENODEV;
+		rc = -ENOMEM;
 	}
 
 out:
@@ -585,7 +611,26 @@ static int test_fw_run_batch_request(void *data)
 		return -EINVAL;
 	}
 
-	req->rc = test_fw_config->req_firmware(&req->fw, req->name, req->dev);
+	if (test_fw_config->into_buf) {
+		void *test_buf;
+
+		test_buf = kzalloc(TEST_FIRMWARE_BUF_SIZE, GFP_KERNEL);
+		if (!test_buf)
+			return -ENOSPC;
+
+		req->rc = request_firmware_into_buf(&req->fw,
+						    req->name,
+						    req->dev,
+						    test_buf,
+						    TEST_FIRMWARE_BUF_SIZE);
+		if (!req->fw)
+			kfree(test_buf);
+	} else {
+		req->rc = test_fw_config->req_firmware(&req->fw,
+						       req->name,
+						       req->dev);
+	}
+
 	if (req->rc) {
 		pr_info("#%u: batched sync load failed: %d\n",
 			req->idx, req->rc);
@@ -849,6 +894,7 @@ static struct attribute *test_dev_attrs[] = {
 	TEST_FW_DEV_ATTR(config),
 	TEST_FW_DEV_ATTR(config_name),
 	TEST_FW_DEV_ATTR(config_num_requests),
+	TEST_FW_DEV_ATTR(config_into_buf),
 	TEST_FW_DEV_ATTR(config_sync_direct),
 	TEST_FW_DEV_ATTR(config_send_uevent),
 	TEST_FW_DEV_ATTR(config_read_fw_idx),
-- 
2.17.1


^ permalink raw reply	[flat|nested] 3+ messages in thread

* [PATCH v2 2/2] selftests: firmware: Add request_firmware_into_buf tests
  2019-08-22 18:40 [PATCH v2 0/2] firmware: selftest for request_firmware_into_buf Scott Branden
  2019-08-22 18:40 ` [PATCH v2 1/2] test_firmware: add support " Scott Branden
@ 2019-08-22 18:40 ` Scott Branden
  1 sibling, 0 replies; 3+ messages in thread
From: Scott Branden @ 2019-08-22 18:40 UTC (permalink / raw)
  To: Luis Chamberlain, Greg Kroah-Hartman, David Brown,
	Alexander Viro, Shuah Khan, bjorn.andersson
  Cc: Rafael J . Wysocki, linux-kernel, linux-arm-msm, linux-fsdevel,
	BCM Kernel Feedback, Olof Johansson, Andrew Morton,
	Dan Carpenter, Colin Ian King, Kees Cook, Takashi Iwai,
	linux-kselftest, Scott Branden

Add tests cases for checking request_firmware_into_buf api.
API was introduced into kernel with no testing present previously.

Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
---
 .../selftests/firmware/fw_filesystem.sh       | 57 ++++++++++++++++++-
 tools/testing/selftests/firmware/fw_lib.sh    | 11 ++++
 2 files changed, 66 insertions(+), 2 deletions(-)

diff --git a/tools/testing/selftests/firmware/fw_filesystem.sh b/tools/testing/selftests/firmware/fw_filesystem.sh
index f901076aa2ea..56894477c8bd 100755
--- a/tools/testing/selftests/firmware/fw_filesystem.sh
+++ b/tools/testing/selftests/firmware/fw_filesystem.sh
@@ -116,6 +116,16 @@ config_set_name()
 	echo -n $1 >  $DIR/config_name
 }
 
+config_set_into_buf()
+{
+	echo 1 >  $DIR/config_into_buf
+}
+
+config_unset_into_buf()
+{
+	echo 0 >  $DIR/config_into_buf
+}
+
 config_set_sync_direct()
 {
 	echo 1 >  $DIR/config_sync_direct
@@ -153,11 +163,14 @@ config_set_read_fw_idx()
 
 read_firmwares()
 {
-	if [ "$1" = "xzonly" ]; then
-		fwfile="${FW}-orig"
+	if [ "$(cat $DIR/config_into_buf)" == "1" ]; then
+		fwfile="$FW_INTO_BUF"
 	else
 		fwfile="$FW"
 	fi
+	if [ "$1" = "xzonly" ]; then
+		fwfile="${fwfile}-orig"
+	fi
 	for i in $(seq 0 3); do
 		config_set_read_fw_idx $i
 		# Verify the contents are what we expect.
@@ -194,6 +207,18 @@ test_batched_request_firmware_nofile()
 	echo "OK"
 }
 
+test_batched_request_firmware_into_buf_nofile()
+{
+	echo -n "Batched request_firmware_into_buf() nofile try #$1: "
+	config_reset
+	config_set_name nope-test-firmware.bin
+	config_set_into_buf
+	config_trigger_sync
+	read_firmwares_expect_nofile
+	release_all_firmware
+	echo "OK"
+}
+
 test_batched_request_firmware_direct_nofile()
 {
 	echo -n "Batched request_firmware_direct() nofile try #$1: "
@@ -259,6 +284,18 @@ test_batched_request_firmware()
 	echo "OK"
 }
 
+test_batched_request_firmware_into_buf()
+{
+	echo -n "Batched request_firmware_into_buf() $2 try #$1: "
+	config_reset
+	config_set_name $TEST_FIRMWARE_INTO_BUF_FILENAME
+	config_set_into_buf
+	config_trigger_sync
+	read_firmwares $2
+	release_all_firmware
+	echo "OK"
+}
+
 test_batched_request_firmware_direct()
 {
 	echo -n "Batched request_firmware_direct() $2 try #$1: "
@@ -307,6 +344,10 @@ for i in $(seq 1 5); do
 	test_batched_request_firmware $i normal
 done
 
+for i in $(seq 1 5); do
+	test_batched_request_firmware_into_buf $i normal
+done
+
 for i in $(seq 1 5); do
 	test_batched_request_firmware_direct $i normal
 done
@@ -327,6 +368,10 @@ for i in $(seq 1 5); do
 	test_batched_request_firmware_nofile $i
 done
 
+for i in $(seq 1 5); do
+	test_batched_request_firmware_into_buf_nofile $i
+done
+
 for i in $(seq 1 5); do
 	test_batched_request_firmware_direct_nofile $i
 done
@@ -350,6 +395,10 @@ for i in $(seq 1 5); do
 	test_batched_request_firmware $i both
 done
 
+for i in $(seq 1 5); do
+	test_batched_request_firmware_into_buf $i both
+done
+
 for i in $(seq 1 5); do
 	test_batched_request_firmware_direct $i both
 done
@@ -370,6 +419,10 @@ for i in $(seq 1 5); do
 	test_batched_request_firmware $i xzonly
 done
 
+for i in $(seq 1 5); do
+	test_batched_request_firmware_into_buf $i xzonly
+done
+
 for i in $(seq 1 5); do
 	test_batched_request_firmware_direct $i xzonly
 done
diff --git a/tools/testing/selftests/firmware/fw_lib.sh b/tools/testing/selftests/firmware/fw_lib.sh
index f236cc295450..b879305a766d 100755
--- a/tools/testing/selftests/firmware/fw_lib.sh
+++ b/tools/testing/selftests/firmware/fw_lib.sh
@@ -9,6 +9,12 @@ DIR=/sys/devices/virtual/misc/test_firmware
 PROC_CONFIG="/proc/config.gz"
 TEST_DIR=$(dirname $0)
 
+# We need to load a different file to test request_firmware_into_buf
+# I believe the issue is firmware loaded cached vs. non-cached
+# with same filename is bungled.
+# To reproduce rename this to test-firmware.bin
+TEST_FIRMWARE_INTO_BUF_FILENAME=test-firmware-into-buf.bin
+
 # Kselftest framework requirement - SKIP code is 4.
 ksft_skip=4
 
@@ -108,6 +114,8 @@ setup_tmp_file()
 	FWPATH=$(mktemp -d)
 	FW="$FWPATH/test-firmware.bin"
 	echo "ABCD0123" >"$FW"
+	FW_INTO_BUF="$FWPATH/$TEST_FIRMWARE_INTO_BUF_FILENAME"
+	echo "EFGH4567" >"$FW_INTO_BUF"
 	NAME=$(basename "$FW")
 	if [ "$TEST_REQS_FW_SET_CUSTOM_PATH" = "yes" ]; then
 		echo -n "$FWPATH" >/sys/module/firmware_class/parameters/path
@@ -175,6 +183,9 @@ test_finish()
 	if [ -f $FW ]; then
 		rm -f "$FW"
 	fi
+	if [ -f $FW_INTO_BUF ]; then
+		rm -f "$FW_INTO_BUF"
+	fi
 	if [ -d $FWPATH ]; then
 		rm -rf "$FWPATH"
 	fi
-- 
2.17.1


^ permalink raw reply	[flat|nested] 3+ messages in thread

end of thread, back to index

Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-08-22 18:40 [PATCH v2 0/2] firmware: selftest for request_firmware_into_buf Scott Branden
2019-08-22 18:40 ` [PATCH v2 1/2] test_firmware: add support " Scott Branden
2019-08-22 18:40 ` [PATCH v2 2/2] selftests: firmware: Add request_firmware_into_buf tests Scott Branden

Linux-ARM-MSM Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-arm-msm/0 linux-arm-msm/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-arm-msm linux-arm-msm/ https://lore.kernel.org/linux-arm-msm \
		linux-arm-msm@vger.kernel.org linux-arm-msm@archiver.kernel.org
	public-inbox-index linux-arm-msm


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-arm-msm


AGPL code for this site: git clone https://public-inbox.org/ public-inbox