Linux-ARM-MSM Archive on lore.kernel.org
 help / color / Atom feed
From: Vivek Gautam <vivek.gautam@codeaurora.org>
To: joro@8bytes.org, agross@kernel.org, will.deacon@arm.com,
	robin.murphy@arm.com, iommu@lists.linux-foundation.org
Cc: bjorn.andersson@linaro.org, linux-arm-msm@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	Vivek Gautam <vivek.gautam@codeaurora.org>
Subject: [PATCH v4 2/3] firmware/qcom_scm: Add scm call to handle smmu errata
Date: Fri, 23 Aug 2019 12:02:47 +0530
Message-ID: <20190823063248.13295-3-vivek.gautam@codeaurora.org> (raw)
In-Reply-To: <20190823063248.13295-1-vivek.gautam@codeaurora.org>

Qcom's smmu-500 needs to toggle wait-for-safe sequence to
handle TLB invalidation sync's.
Few firmwares allow doing that through SCM interface.
Add API to toggle wait for safe from firmware through a
SCM call.

Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---
 drivers/firmware/qcom_scm-32.c |  5 +++++
 drivers/firmware/qcom_scm-64.c | 13 +++++++++++++
 drivers/firmware/qcom_scm.c    |  6 ++++++
 drivers/firmware/qcom_scm.h    |  5 +++++
 include/linux/qcom_scm.h       |  2 ++
 5 files changed, 31 insertions(+)

diff --git a/drivers/firmware/qcom_scm-32.c b/drivers/firmware/qcom_scm-32.c
index 215061c581e1..bee8729525ec 100644
--- a/drivers/firmware/qcom_scm-32.c
+++ b/drivers/firmware/qcom_scm-32.c
@@ -614,3 +614,8 @@ int __qcom_scm_io_writel(struct device *dev, phys_addr_t addr, unsigned int val)
 	return qcom_scm_call_atomic2(QCOM_SCM_SVC_IO, QCOM_SCM_IO_WRITE,
 				     addr, val);
 }
+
+int __qcom_scm_qsmmu500_wait_safe_toggle(struct device *dev, bool enable)
+{
+	return -ENODEV;
+}
diff --git a/drivers/firmware/qcom_scm-64.c b/drivers/firmware/qcom_scm-64.c
index b6dca32c5ac4..41c06dcfa9e1 100644
--- a/drivers/firmware/qcom_scm-64.c
+++ b/drivers/firmware/qcom_scm-64.c
@@ -550,3 +550,16 @@ int __qcom_scm_io_writel(struct device *dev, phys_addr_t addr, unsigned int val)
 	return qcom_scm_call(dev, QCOM_SCM_SVC_IO, QCOM_SCM_IO_WRITE,
 			     &desc, &res);
 }
+
+int __qcom_scm_qsmmu500_wait_safe_toggle(struct device *dev, bool en)
+{
+	struct qcom_scm_desc desc = {0};
+	struct arm_smccc_res res;
+
+	desc.args[0] = QCOM_SCM_CONFIG_ERRATA1_CLIENT_ALL;
+	desc.args[1] = en;
+	desc.arginfo = QCOM_SCM_ARGS(2);
+
+	return qcom_scm_call_atomic(dev, QCOM_SCM_SVC_SMMU_PROGRAM,
+				    QCOM_SCM_CONFIG_ERRATA1, &desc, &res);
+}
diff --git a/drivers/firmware/qcom_scm.c b/drivers/firmware/qcom_scm.c
index 2ddc118dba1b..2b3b7a8c4270 100644
--- a/drivers/firmware/qcom_scm.c
+++ b/drivers/firmware/qcom_scm.c
@@ -344,6 +344,12 @@ int qcom_scm_iommu_secure_ptbl_init(u64 addr, u32 size, u32 spare)
 }
 EXPORT_SYMBOL(qcom_scm_iommu_secure_ptbl_init);
 
+int qcom_scm_qsmmu500_wait_safe_toggle(bool en)
+{
+	return __qcom_scm_qsmmu500_wait_safe_toggle(__scm->dev, en);
+}
+EXPORT_SYMBOL(qcom_scm_qsmmu500_wait_safe_toggle);
+
 int qcom_scm_io_readl(phys_addr_t addr, unsigned int *val)
 {
 	return __qcom_scm_io_readl(__scm->dev, addr, val);
diff --git a/drivers/firmware/qcom_scm.h b/drivers/firmware/qcom_scm.h
index 99506bd873c0..baee744dbcfe 100644
--- a/drivers/firmware/qcom_scm.h
+++ b/drivers/firmware/qcom_scm.h
@@ -91,10 +91,15 @@ extern int __qcom_scm_restore_sec_cfg(struct device *dev, u32 device_id,
 				      u32 spare);
 #define QCOM_SCM_IOMMU_SECURE_PTBL_SIZE	3
 #define QCOM_SCM_IOMMU_SECURE_PTBL_INIT	4
+#define QCOM_SCM_SVC_SMMU_PROGRAM	0x15
+#define QCOM_SCM_CONFIG_ERRATA1		0x3
+#define QCOM_SCM_CONFIG_ERRATA1_CLIENT_ALL	0x2
 extern int __qcom_scm_iommu_secure_ptbl_size(struct device *dev, u32 spare,
 					     size_t *size);
 extern int __qcom_scm_iommu_secure_ptbl_init(struct device *dev, u64 addr,
 					     u32 size, u32 spare);
+extern int __qcom_scm_qsmmu500_wait_safe_toggle(struct device *dev,
+						bool enable);
 #define QCOM_MEM_PROT_ASSIGN_ID	0x16
 extern int  __qcom_scm_assign_mem(struct device *dev,
 				  phys_addr_t mem_region, size_t mem_sz,
diff --git a/include/linux/qcom_scm.h b/include/linux/qcom_scm.h
index 3f12cc77fb58..aee3d8580d89 100644
--- a/include/linux/qcom_scm.h
+++ b/include/linux/qcom_scm.h
@@ -57,6 +57,7 @@ extern int qcom_scm_set_remote_state(u32 state, u32 id);
 extern int qcom_scm_restore_sec_cfg(u32 device_id, u32 spare);
 extern int qcom_scm_iommu_secure_ptbl_size(u32 spare, size_t *size);
 extern int qcom_scm_iommu_secure_ptbl_init(u64 addr, u32 size, u32 spare);
+extern int qcom_scm_qsmmu500_wait_safe_toggle(bool en);
 extern int qcom_scm_io_readl(phys_addr_t addr, unsigned int *val);
 extern int qcom_scm_io_writel(phys_addr_t addr, unsigned int val);
 #else
@@ -96,6 +97,7 @@ qcom_scm_set_remote_state(u32 state,u32 id) { return -ENODEV; }
 static inline int qcom_scm_restore_sec_cfg(u32 device_id, u32 spare) { return -ENODEV; }
 static inline int qcom_scm_iommu_secure_ptbl_size(u32 spare, size_t *size) { return -ENODEV; }
 static inline int qcom_scm_iommu_secure_ptbl_init(u64 addr, u32 size, u32 spare) { return -ENODEV; }
+static inline int qcom_scm_qsmmu500_wait_safe_toggle(bool en) { return -ENODEV; }
 static inline int qcom_scm_io_readl(phys_addr_t addr, unsigned int *val) { return -ENODEV; }
 static inline int qcom_scm_io_writel(phys_addr_t addr, unsigned int val) { return -ENODEV; }
 #endif
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation


  parent reply index

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-08-23  6:32 [PATCH v4 0/3] Qcom smmu-500 wait-for-safe handling for sdm845 Vivek Gautam
2019-08-23  6:32 ` [PATCH v4 1/3] firmware: qcom_scm-64: Add atomic version of qcom_scm_call Vivek Gautam
2019-09-06 15:12   ` Stephen Boyd
2019-09-16  9:48     ` Sai Prakash Ranjan
2019-08-23  6:32 ` Vivek Gautam [this message]
2019-08-23  6:32 ` [PATCH v4 3/3] iommu: arm-smmu-impl: Add sdm845 implementation hook Vivek Gautam
2019-09-06  6:32   ` Vivek Gautam
2019-09-06 15:07   ` Stephen Boyd
2019-09-16  9:47     ` Sai Prakash Ranjan
2019-09-10 13:26   ` Robin Murphy
2019-09-16  9:46     ` Sai Prakash Ranjan

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190823063248.13295-3-vivek.gautam@codeaurora.org \
    --to=vivek.gautam@codeaurora.org \
    --cc=agross@kernel.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=iommu@lists.linux-foundation.org \
    --cc=joro@8bytes.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robin.murphy@arm.com \
    --cc=will.deacon@arm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-ARM-MSM Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-arm-msm/0 linux-arm-msm/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-arm-msm linux-arm-msm/ https://lore.kernel.org/linux-arm-msm \
		linux-arm-msm@vger.kernel.org linux-arm-msm@archiver.kernel.org
	public-inbox-index linux-arm-msm

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-arm-msm


AGPL code for this site: git clone https://public-inbox.org/ public-inbox