Linux-ARM-MSM Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH 0/2] Venus interconnect support for sdm845
@ 2019-08-14  8:46 Stanimir Varbanov
  2019-08-14  8:47 ` [PATCH 1/2] venus: use on-chip interconnect API Stanimir Varbanov
  2019-08-14  8:47 ` [PATCH 2/2] arm64: dts: sdm845: Add interconnect properties for Venus Stanimir Varbanov
  0 siblings, 2 replies; 7+ messages in thread
From: Stanimir Varbanov @ 2019-08-14  8:46 UTC (permalink / raw)
  To: linux-media, linux-kernel, linux-arm-msm, devicetree
  Cc: Vikash Garodia, Andy Gross, Aniket Masule, Stanimir Varbanov

Hello,

Here are two patches which adds interconnect bandwidth requests
depending on the resolution (macroblocks) in order to lower
bandwidth pressure on the interconnect and memory.

regards,
Stan

Stanimir Varbanov (2):
  venus: use on-chip interconnect API
  arm64: dts: sdm845: Add interconnect properties for Venus

 arch/arm64/boot/dts/qcom/sdm845.dtsi        |  3 +
 drivers/media/platform/qcom/venus/core.c    | 34 +++++++++++
 drivers/media/platform/qcom/venus/core.h    | 14 +++++
 drivers/media/platform/qcom/venus/helpers.c | 67 ++++++++++++++++++++-
 4 files changed, 117 insertions(+), 1 deletion(-)

-- 
2.17.1


^ permalink raw reply	[flat|nested] 7+ messages in thread

end of thread, back to index

Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-08-14  8:46 [PATCH 0/2] Venus interconnect support for sdm845 Stanimir Varbanov
2019-08-14  8:47 ` [PATCH 1/2] venus: use on-chip interconnect API Stanimir Varbanov
2019-08-20  9:34   ` Georgi Djakov
2019-08-21  7:53     ` Stanimir Varbanov
2019-09-04  4:22     ` Bjorn Andersson
2019-09-12 15:11       ` Georgi Djakov
2019-08-14  8:47 ` [PATCH 2/2] arm64: dts: sdm845: Add interconnect properties for Venus Stanimir Varbanov

Linux-ARM-MSM Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-arm-msm/0 linux-arm-msm/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-arm-msm linux-arm-msm/ https://lore.kernel.org/linux-arm-msm \
		linux-arm-msm@vger.kernel.org linux-arm-msm@archiver.kernel.org
	public-inbox-index linux-arm-msm

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-arm-msm


AGPL code for this site: git clone https://public-inbox.org/ public-inbox