Linux-ARM-MSM Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH] arm64: dts: qcom: c630: Enable adsp, cdsp and mpss
@ 2019-09-25  7:03 Bjorn Andersson
  2019-10-17 22:29 ` Jeffrey Hugo
  0 siblings, 1 reply; 2+ messages in thread
From: Bjorn Andersson @ 2019-09-25  7:03 UTC (permalink / raw)
  To: Andy Gross; +Cc: linux-arm-msm, devicetree, linux-kernel, Srinivas Kandagatla

Specify the firmware-name for the adsp, cdsp and mpss and enable the
nodes.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---
 .../boot/dts/qcom/sdm850-lenovo-yoga-c630.dts      | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
index ded120d3aef5..d3c841628d66 100644
--- a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
+++ b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
@@ -20,6 +20,11 @@
 	};
 };
 
+&adsp_pas {
+	firmware-name = "qcom/c630/qcadsp850.mbn";
+	status = "okay";
+};
+
 &apps_rsc {
 	pm8998-rpmh-regulators {
 		compatible = "qcom,pm8998-rpmh-regulators";
@@ -229,6 +234,11 @@
 	status = "disabled";
 };
 
+&cdsp_pas {
+	firmware-name = "qcom/c630/qccdsp850.mbn";
+	status = "okay";
+};
+
 &gcc {
 	protected-clocks = <GCC_QSPI_CORE_CLK>,
 			   <GCC_QSPI_CORE_CLK_SRC>,
@@ -296,6 +306,10 @@
 	};
 };
 
+&mss_pil {
+	firmware-name = "qcom/c630/qcdsp1v2850.mbn", "qcom/c630/qcdsp2850.mbn";
+};
+
 &qup_i2c12_default {
 	drive-strength = <2>;
 	bias-disable;
-- 
2.18.0


^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, back to index

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-09-25  7:03 [PATCH] arm64: dts: qcom: c630: Enable adsp, cdsp and mpss Bjorn Andersson
2019-10-17 22:29 ` Jeffrey Hugo

Linux-ARM-MSM Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-arm-msm/0 linux-arm-msm/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-arm-msm linux-arm-msm/ https://lore.kernel.org/linux-arm-msm \
		linux-arm-msm@vger.kernel.org
	public-inbox-index linux-arm-msm

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-arm-msm


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git