linux-arm-msm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Luca Weiss <luca@z3ntu.xyz>
To: linux-arm-msm@vger.kernel.org
Cc: Luca Weiss <luca@z3ntu.xyz>, Russell King <linux@armlinux.org.uk>,
	Bjorn Andersson <bjorn.andersson@linaro.org>,
	Brian Masney <masneyb@onstation.org>,
	Linus Walleij <linus.walleij@linaro.org>,
	Sudeep Holla <sudeep.holla@arm.com>,
	Krzysztof Kozlowski <krzk@kernel.org>,
	Miquel Raynal <miquel.raynal@bootlin.com>,
	Jordan Crouse <jcrouse@codeaurora.org>,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH 1/2] ARM: qcom_defconfig: Regenerate
Date: Mon,  4 Nov 2019 22:09:40 +0100	[thread overview]
Message-ID: <20191104210943.101393-1-luca@z3ntu.xyz> (raw)

Several options were dropped a while ago and the options QCOM_ADSP_PIL
and QCOM_Q6V5_PIL have been renamed.

Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
---
 arch/arm/configs/qcom_defconfig | 45 ++++++++++++---------------------
 1 file changed, 16 insertions(+), 29 deletions(-)

diff --git a/arch/arm/configs/qcom_defconfig b/arch/arm/configs/qcom_defconfig
index 9792dd0aae0c..94d5e1a8c61a 100644
--- a/arch/arm/configs/qcom_defconfig
+++ b/arch/arm/configs/qcom_defconfig
@@ -1,6 +1,7 @@
 CONFIG_SYSVIPC=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
+CONFIG_PREEMPT=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_CGROUPS=y
@@ -11,32 +12,28 @@ CONFIG_EMBEDDED=y
 # CONFIG_SLUB_DEBUG is not set
 # CONFIG_COMPAT_BRK is not set
 CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
-CONFIG_KPROBES=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_PARTITION_ADVANCED=y
 CONFIG_ARCH_QCOM=y
 CONFIG_ARCH_MSM8X60=y
 CONFIG_ARCH_MSM8960=y
 CONFIG_ARCH_MSM8974=y
 CONFIG_ARCH_MDM9615=y
-CONFIG_PCI=y
-CONFIG_PCI_MSI=y
-CONFIG_PCIE_QCOM=y
 CONFIG_SMP=y
-CONFIG_PREEMPT=y
 CONFIG_HIGHMEM=y
-CONFIG_CLEANCACHE=y
 CONFIG_ARM_APPENDED_DTB=y
 CONFIG_ARM_ATAG_DTB_COMPAT=y
 CONFIG_CPU_IDLE=y
 CONFIG_ARM_CPUIDLE=y
 CONFIG_VFP=y
 CONFIG_NEON=y
+CONFIG_OPROFILE=y
+CONFIG_KPROBES=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_PARTITION_ADVANCED=y
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_CLEANCACHE=y
 CONFIG_CMA=y
 CONFIG_NET=y
 CONFIG_PACKET=y
@@ -47,18 +44,17 @@ CONFIG_IP_MULTIPLE_TABLES=y
 CONFIG_IP_ROUTE_VERBOSE=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_IPV6 is not set
 CONFIG_CFG80211=m
 CONFIG_MAC80211=m
 CONFIG_RFKILL=y
+CONFIG_PCI=y
+CONFIG_PCI_MSI=y
+CONFIG_PCIE_QCOM=y
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_MTD=y
 CONFIG_MTD_BLOCK=y
-CONFIG_MTD_M25P80=y
 CONFIG_MTD_RAW_NAND=y
 CONFIG_MTD_NAND_QCOM=y
 CONFIG_MTD_SPI_NOR=y
@@ -113,7 +109,6 @@ CONFIG_SERIO_LIBPS2=y
 CONFIG_SERIAL_MSM=y
 CONFIG_SERIAL_MSM_CONSOLE=y
 CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_QUP=y
 CONFIG_SPI=y
@@ -140,7 +135,6 @@ CONFIG_QCOM_TSENS=y
 CONFIG_MFD_PM8XXX=y
 CONFIG_MFD_QCOM_RPM=y
 CONFIG_MFD_SPMI_PMIC=y
-CONFIG_REGULATOR=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_REGULATOR_QCOM_RPM=y
 CONFIG_REGULATOR_QCOM_SMD_RPM=y
@@ -149,13 +143,11 @@ CONFIG_MEDIA_SUPPORT=y
 CONFIG_DRM=y
 CONFIG_DRM_MSM=m
 CONFIG_DRM_PANEL_SIMPLE=y
-CONFIG_FB=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_LCD_CLASS_DEVICE is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
 # CONFIG_BACKLIGHT_GENERIC is not set
 CONFIG_BACKLIGHT_LM3630A=y
 CONFIG_BACKLIGHT_LP855X=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_SOUND=y
 CONFIG_SND=y
 CONFIG_SND_DYNAMIC_MINORS=y
@@ -169,15 +161,12 @@ CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
 CONFIG_USB_OTG=y
 CONFIG_USB_MON=y
 CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_MSM=y
 CONFIG_USB_ACM=y
 CONFIG_USB_CHIPIDEA=y
 CONFIG_USB_CHIPIDEA_UDC=y
 CONFIG_USB_CHIPIDEA_HOST=y
-CONFIG_USB_CHIPIDEA_ULPI=y
 CONFIG_USB_SERIAL=y
 CONFIG_USB_HSIC_USB4604=y
-CONFIG_USB_MSM_OTG=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_GADGET_DEBUG_FILES=y
 CONFIG_USB_GADGET_VBUS_DRAW=500
@@ -185,7 +174,6 @@ CONFIG_USB_CONFIGFS=y
 CONFIG_USB_CONFIGFS_NCM=y
 CONFIG_USB_CONFIGFS_ECM=y
 CONFIG_USB_CONFIGFS_F_FS=y
-CONFIG_USB_ULPI_BUS=y
 CONFIG_USB_ETH=m
 CONFIG_MMC=y
 CONFIG_MMC_BLOCK_MINORS=32
@@ -215,13 +203,13 @@ CONFIG_MSM_LCC_8960=y
 CONFIG_MDM_LCC_9615=y
 CONFIG_MSM_MMCC_8960=y
 CONFIG_MSM_MMCC_8974=y
-CONFIG_MSM_IOMMU=y
 CONFIG_HWSPINLOCK=y
 CONFIG_HWSPINLOCK_QCOM=y
 CONFIG_MAILBOX=y
+CONFIG_MSM_IOMMU=y
 CONFIG_REMOTEPROC=y
-CONFIG_QCOM_ADSP_PIL=y
-CONFIG_QCOM_Q6V5_PIL=y
+CONFIG_QCOM_Q6V5_MSS=y
+CONFIG_QCOM_Q6V5_PAS=y
 CONFIG_QCOM_WCNSS_PIL=y
 CONFIG_RPMSG_CHAR=y
 CONFIG_RPMSG_QCOM_SMD=y
@@ -257,7 +245,6 @@ CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT3_FS=y
 CONFIG_FUSE_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
 CONFIG_JFFS2_FS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3_ACL=y
-- 
2.23.0


             reply	other threads:[~2019-11-04 21:16 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-11-04 21:09 Luca Weiss [this message]
2019-11-04 21:09 ` [PATCH 2/2] ARM: qcom_defconfig: Enable QRTR Luca Weiss
2020-01-25 10:46   ` Brian Masney
2020-01-25 10:44 ` [PATCH 1/2] ARM: qcom_defconfig: Regenerate Brian Masney

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191104210943.101393-1-luca@z3ntu.xyz \
    --to=luca@z3ntu.xyz \
    --cc=bjorn.andersson@linaro.org \
    --cc=jcrouse@codeaurora.org \
    --cc=krzk@kernel.org \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=masneyb@onstation.org \
    --cc=miquel.raynal@bootlin.com \
    --cc=sudeep.holla@arm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).