Linux-ARM-MSM Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH v2 0/4] ARM: qcom: add defconfig items and dts nodes
@ 2019-10-24 10:31 Brian Masney
  2019-10-24 10:31 ` [PATCH v2 1/4] ARM: qcom_defconfig: add msm8974 interconnect support Brian Masney
                   ` (4 more replies)
  0 siblings, 5 replies; 8+ messages in thread
From: Brian Masney @ 2019-10-24 10:31 UTC (permalink / raw)
  To: agross, bjorn.andersson
  Cc: robh+dt, mark.rutland, linux-arm-msm, devicetree, linux-kernel,
	linux-arm-kernel, georgi.djakov

Here's a small patch series that adds some additional functionality
to qcom_defconfig and to qcom-msm8974.dtsi: interconnect, ocmem,
and HDMI bridge (defconfig only).

Some high-level changes since v1:
- Updated interconnect support. See patch #4 in this series for details.
- Dropped ocmem defconfig since that got merged.

Brian Masney (4):
  ARM: qcom_defconfig: add msm8974 interconnect support
  ARM: qcom_defconfig: add anx78xx HDMI bridge support
  ARM: dts: qcom: msm8974: add ocmem node
  ARM: dts: qcom: msm8974: add interconnect nodes

 arch/arm/boot/dts/qcom-msm8974.dtsi | 77 +++++++++++++++++++++++++++++
 arch/arm/configs/qcom_defconfig     |  4 ++
 2 files changed, 81 insertions(+)

-- 
2.21.0


^ permalink raw reply	[flat|nested] 8+ messages in thread

end of thread, back to index

Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-10-24 10:31 [PATCH v2 0/4] ARM: qcom: add defconfig items and dts nodes Brian Masney
2019-10-24 10:31 ` [PATCH v2 1/4] ARM: qcom_defconfig: add msm8974 interconnect support Brian Masney
2019-11-09  0:43   ` Brian Masney
2019-11-09  1:57     ` Bjorn Andersson
2019-10-24 10:31 ` [PATCH v2 2/4] ARM: qcom_defconfig: add anx78xx HDMI bridge support Brian Masney
2019-10-24 10:31 ` [PATCH v2 3/4] ARM: dts: qcom: msm8974: add ocmem node Brian Masney
2019-10-24 10:31 ` [PATCH v2 4/4] ARM: dts: qcom: msm8974: add interconnect nodes Brian Masney
2019-10-29 11:18 ` [PATCH v2 0/4] ARM: qcom: add defconfig items and dts nodes Georgi Djakov

Linux-ARM-MSM Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-arm-msm/0 linux-arm-msm/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-arm-msm linux-arm-msm/ https://lore.kernel.org/linux-arm-msm \
		linux-arm-msm@vger.kernel.org
	public-inbox-index linux-arm-msm

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-arm-msm


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git