From: Bjorn Andersson <bjorn.andersson@linaro.org>
To: Amit Kucheria <amit.kucheria@linaro.org>
Cc: linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org,
edubezval@gmail.com, swboyd@chromium.org, sivaa@codeaurora.org,
Andy Gross <agross@kernel.org>,
Daniel Lezcano <daniel.lezcano@linaro.org>,
Amit Kucheria <amit.kucheria@verdurent.com>,
linux-pm@vger.kernel.org
Subject: Re: [PATCH 1/3] drivers: thermal: tsens: Add critical interrupt support
Date: Tue, 12 Nov 2019 11:38:52 -0800 [thread overview]
Message-ID: <20191112193852.GC3140946@builder> (raw)
In-Reply-To: <4b949a4f401a7f9d403ed0f0c16c7feb083f3524.1573499020.git.amit.kucheria@linaro.org>
On Mon 11 Nov 11:21 PST 2019, Amit Kucheria wrote:
> TSENS IP v2.x adds critical threshold interrupt support for each sensor
> in addition to the upper/lower threshold interrupt. Add support in the
> driver.
>
> Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
> ---
> drivers/thermal/qcom/tsens-common.c | 129 ++++++++++++++++++++++++++--
> drivers/thermal/qcom/tsens-v2.c | 8 +-
> drivers/thermal/qcom/tsens.c | 21 +++++
> drivers/thermal/qcom/tsens.h | 73 ++++++++++++++++
> 4 files changed, 220 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/thermal/qcom/tsens-common.c b/drivers/thermal/qcom/tsens-common.c
> index 4359a4247ac3..2989cb952cdb 100644
> --- a/drivers/thermal/qcom/tsens-common.c
> +++ b/drivers/thermal/qcom/tsens-common.c
> @@ -23,6 +23,10 @@
> * @low_thresh: lower threshold temperature value
> * @low_irq_mask: mask register for lower threshold irqs
> * @low_irq_clear: clear register for lower threshold irqs
> + * @crit_viol: critical threshold violated
"violated" as in "temperature is above crit_thresh"?
> + * @crit_thresh: critical threshold temperature value
> + * @crit_irq_mask: mask register for critical threshold irqs
> + * @crit_irq_clear: clear register for critical threshold irqs
> *
[..]
> diff --git a/drivers/thermal/qcom/tsens.c b/drivers/thermal/qcom/tsens.c
> index 7d317660211e..784c4976c4f9 100644
> --- a/drivers/thermal/qcom/tsens.c
> +++ b/drivers/thermal/qcom/tsens.c
> @@ -121,6 +121,27 @@ static int tsens_register(struct tsens_priv *priv)
>
> enable_irq_wake(irq);
>
> + if (tsens_version(priv) > VER_1_X) {
> + irq = platform_get_irq_byname(pdev, "critical");
> + if (irq < 0) {
Treating this as a fatal error breaks backwards compatibility with
current devicetree; and even within your patch series, tsens should fail
to probe between this patch and the application of patch 3.
Please flip this around and do:
irq = platform_get_irq_byname(pdev, "critical");
if (irq >= 0 && tsens_version(priv) > VER_1_X) {
request_irq()...
}
> + ret = irq;
> + goto err_put_device;
> + }
> +
> + ret = devm_request_threaded_irq(&pdev->dev, irq,
> + NULL, tsens_critical_irq_thread,
> + IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
> + dev_name(&pdev->dev), priv);
> + if (ret) {
> + dev_err(&pdev->dev, "%s: failed to get critical irq\n", __func__);
> + goto err_put_device;
> + }
> +
> + enable_irq_wake(irq);
> + }
> +
> + return 0;
> +
> err_put_device:
> put_device(&pdev->dev);
> return ret;
Regards,
Bjorn
next prev parent reply other threads:[~2019-11-12 19:39 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-11-11 19:21 [PATCH 0/3] thermal: tsens: Handle critical interrupts Amit Kucheria
2019-11-11 19:21 ` [PATCH 1/3] drivers: thermal: tsens: Add critical interrupt support Amit Kucheria
2019-11-12 19:38 ` Bjorn Andersson [this message]
2019-11-28 18:46 ` Amit Kucheria
2019-11-28 21:43 ` Bjorn Andersson
2019-12-03 5:02 ` Amit Kucheria
2019-11-14 22:50 ` Stephen Boyd
2019-12-03 4:57 ` Amit Kucheria
2019-11-11 19:21 ` [PATCH 2/3] drivers: thermal: tsens: Add watchdog support Amit Kucheria
2019-11-12 19:22 ` Bjorn Andersson
2019-11-28 19:18 ` Amit Kucheria
2019-11-14 22:38 ` Stephen Boyd
2019-11-28 19:16 ` Amit Kucheria
2019-11-11 19:21 ` [PATCH 3/3] arm64: dts: sdm845: thermal: Add critical interrupt support Amit Kucheria
2019-11-12 19:43 ` Bjorn Andersson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191112193852.GC3140946@builder \
--to=bjorn.andersson@linaro.org \
--cc=agross@kernel.org \
--cc=amit.kucheria@linaro.org \
--cc=amit.kucheria@verdurent.com \
--cc=daniel.lezcano@linaro.org \
--cc=edubezval@gmail.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=sivaa@codeaurora.org \
--cc=swboyd@chromium.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).