Linux-ARM-MSM Archive on
 help / color / Atom feed
From: Bjorn Andersson <>
To: Andy Gross <>,
	Bjorn Andersson <>,
	Jeffrey Hugo <>
Subject: [PATCH v2] arm64: dts: qcom: msm8998-mtp: Add alias for blsp1_uart3
Date: Mon, 18 Nov 2019 17:18:23 -0800
Message-ID: <> (raw)

The msm_serial driver has a predefined set of uart ports defined, which
is allocated either by reading aliases or if no match is found a simple
counter, starting at index 0. But there's no logic in place to prevent
these two allocation mechanism from colliding. As a result either none
or all of the active msm_serial instances must be listed as aliases.

Define blsp1_uart3 as "serial1" to mitigate this problem.

Fixes: 4cffb9f2c700 ("arm64: dts: qcom: msm8998-mtp: Enable bluetooth")
Signed-off-by: Bjorn Andersson <>

Changes since v1:
- Rewrote commit message

 arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi b/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi
index 5f101a20a20a..e08fcb426bbf 100644
--- a/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi
@@ -9,6 +9,7 @@
 / {
 	aliases {
 		serial0 = &blsp2_uart1;
+		serial1 = &blsp1_uart3;
 	chosen {

             reply index

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-11-19  1:18 Bjorn Andersson [this message]
2019-11-19 15:37 ` Jeffrey Hugo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \ \ \ \ \ \ \ \

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-ARM-MSM Archive on

Archives are clonable:
	git clone --mirror linux-arm-msm/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-arm-msm linux-arm-msm/ \
	public-inbox-index linux-arm-msm

Example config snippet for mirrors

Newsgroup available over NNTP:

AGPL code for this site: git clone