From: Matthias Kaehlcke <mka@chromium.org> To: Sharat Masetty <smasetty@codeaurora.org> Cc: freedreno@lists.freedesktop.org, dri-devel@freedesktop.org, linux-arm-msm@vger.kernel.org Subject: Re: [PATCH 5/5] arm: dts: sc7180: Add A618 gpu dt blob Date: Wed, 4 Dec 2019 14:00:33 -0800 Message-ID: <20191204220033.GH228856@google.com> (raw) In-Reply-To: <0101016ecc556508-b3be0a5f-4987-4c21-a0b4-33f380cf278b-000000@us-west-2.amazonses.com> Hi Sharat, on which tree is this patch based on? It does not apply against qcom/arm64-for-5.6-to-be-rebased. In one of my repos which has a non-upstream Qualcomm tree as remote git can make sense of the hashes in the index line, however the parent of your patch looks quite different from the maintainer version. Another thing that hints towards a custom tree: > + interconnects = <&gem_noc 35 &mc_virt 512>; To my knowledge no patches have been posted to add the referenced interconnect nodes for SC7180. Please base your patches on the appropriate maintainer tree(s). Thanks Matthias On Tue, Dec 03, 2019 at 03:16:18PM +0000, Sharat Masetty wrote: > This patch adds the required dt nodes and properties > to enabled A618 GPU. > > Signed-off-by: Sharat Masetty <smasetty@codeaurora.org> > --- > arch/arm64/boot/dts/qcom/sc7180.dtsi | 116 +++++++++++++++++++++++++++++++++++ > 1 file changed, 116 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi > index c3db2e5..31223d0 100644 > --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi > +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi > @@ -18,6 +18,8 @@ > #include <dt-bindings/reset/qcom,sdm845-pdc.h> > #include <dt-bindings/soc/qcom,rpmh-rsc.h> > #include <dt-bindings/phy/phy-qcom-qusb2.h> > +#include <dt-bindings/clock/qcom,gpucc-sc7180.h> > +#include <dt-bindings/power/qcom-rpmpd.h> > > / { > interrupt-parent = <&intc>; > @@ -733,6 +735,120 @@ > #power-domain-cells = <1>; > }; > > + gpu: gpu@5000000 { > + compatible = "qcom,adreno-618.0", "qcom,adreno"; > + #stream-id-cells = <16>; > + reg = <0 0x5000000 0 0x40000>, <0 0x509e000 0 0x1000>, > + <0 0x5061000 0 0x800>; > + reg-names = "kgsl_3d0_reg_memory", "cx_mem", "cx_dbgc"; > + > + interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>; > + > + iommus = <&adreno_smmu 0>; > + > + operating-points-v2 = <&gpu_opp_table>; > + > + interconnects = <&gem_noc 35 &mc_virt 512>; > + > + qcom,gmu = <&gmu>; > + > + gpu_opp_table: opp-table { > + compatible = "operating-points-v2"; > + > + opp-800000000 { > + opp-hz = /bits/ 64 <800000000>; > + opp-level = <RPMH_REGULATOR_LEVEL_TURBO>; > + }; > + > + opp-650000000 { > + opp-hz = /bits/ 64 <650000000>; > + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>; > + }; > + > + opp-565000000 { > + opp-hz = /bits/ 64 <565000000>; > + opp-level = <RPMH_REGULATOR_LEVEL_NOM>; > + }; > + > + opp-430000000 { > + opp-hz = /bits/ 64 <430000000>; > + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; > + }; > + > + opp-355000000 { > + opp-hz = /bits/ 64 <355000000>; > + opp-level = <RPMH_REGULATOR_LEVEL_SVS>; > + }; > + > + opp-267000000 { > + opp-hz = /bits/ 64 <267000000>; > + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; > + }; > + > + opp-180000000 { > + opp-hz = /bits/ 64 <180000000>; > + opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>; > + }; > + }; > + }; > + > + adreno_smmu: iommu@5040000 { > + compatible = "qcom,sc7180-smmu-v2", "qcom,smmu-v2"; > + reg = <0 0x5040000 0 0x10000>; > + #iommu-cells = <1>; > + #global-interrupts = <2>; > + interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 364 IRQ_TYPE_EDGE_RISING>, > + <GIC_SPI 365 IRQ_TYPE_EDGE_RISING>, > + <GIC_SPI 366 IRQ_TYPE_EDGE_RISING>, > + <GIC_SPI 367 IRQ_TYPE_EDGE_RISING>, > + <GIC_SPI 368 IRQ_TYPE_EDGE_RISING>, > + <GIC_SPI 369 IRQ_TYPE_EDGE_RISING>, > + <GIC_SPI 370 IRQ_TYPE_EDGE_RISING>, > + <GIC_SPI 371 IRQ_TYPE_EDGE_RISING>; > + clocks = <&gcc GCC_GPU_MEMNOC_GFX_CLK>, > + <&gcc GCC_GPU_CFG_AHB_CLK>, > + <&gcc GCC_DDRSS_GPU_AXI_CLK>; > + > + clock-names = "bus", "iface", "mem_iface_clk"; > + power-domains = <&gpucc CX_GDSC>; > + }; > + > + gmu: gmu@506a000 { > + compatible="qcom,adreno-gmu-618", "qcom,adreno-gmu"; > + > + reg = <0 0x506a000 0 0x31000>, > + <0 0xb290000 0 0x10000>, > + <0 0xb490000 0 0x10000>; > + reg-names = "gmu", "gmu_pdc", "gmu_pdc_seq"; > + > + interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>; > + interrupt-names = "hfi", "gmu"; > + > + clocks = <&gpucc GPU_CC_CX_GMU_CLK>, > + <&gpucc GPU_CC_CXO_CLK>, > + <&gcc GCC_DDRSS_GPU_AXI_CLK>, > + <&gcc GCC_GPU_MEMNOC_GFX_CLK>; > + clock-names = "gmu", "cxo", "axi", "memnoc"; > + > + power-domains = <&gpucc CX_GDSC>; > + > + iommus = <&adreno_smmu 5>; > + > + operating-points-v2 = <&gmu_opp_table>; > + > + gmu_opp_table: opp-table { > + compatible = "operating-points-v2"; > + > + opp-200000000 { > + opp-hz = /bits/ 64 <200000000>; > + opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>; > + }; > + }; > + }; > + > apps_smmu: iommu@15000000 { > compatible = "qcom,sc7180-smmu-500", "arm,mmu-500"; > reg = <0 0x15000000 0 0x100000>; > -- > 1.9.1 >
next prev parent reply index Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top [not found] <1575386150-13299-1-git-send-email-smasetty@codeaurora.org> 2019-12-03 15:16 ` [PATCH 1/5] drm: msm: Add 618 gpu to the adreno gpu list Sharat Masetty 2019-12-03 15:16 ` [PATCH 2/5] drm: msm: a6xx: Add support for A618 Sharat Masetty 2019-12-03 15:16 ` [PATCH 3/5] drm: msm: a6xx: Dump GBIF registers, debugbus in gpu state Sharat Masetty 2019-12-03 15:16 ` [PATCH 4/5] drm: msm: a6xx: fix debug bus register configuration Sharat Masetty 2019-12-03 15:16 ` [PATCH 5/5] arm: dts: sc7180: Add A618 gpu dt blob Sharat Masetty 2019-12-04 22:00 ` Matthias Kaehlcke [this message] [not found] ` <0101016ecc5558bf-ec60fe4c-337a-44eb-8aae-08883795476e-000000@us-west-2.amazonses.com> 2019-12-03 16:32 ` [PATCH 4/5] drm: msm: a6xx: fix debug bus register configuration Rob Clark [not found] <1575385543-11290-1-git-send-email-smasetty@codeaurora.org> 2019-12-03 15:06 ` [PATCH 5/5] arm: dts: sc7180: Add A618 gpu dt blob Sharat Masetty
Reply instructions: You may reply publically to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20191204220033.GH228856@google.com \ --to=mka@chromium.org \ --cc=dri-devel@freedesktop.org \ --cc=freedreno@lists.freedesktop.org \ --cc=linux-arm-msm@vger.kernel.org \ --cc=smasetty@codeaurora.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
Linux-ARM-MSM Archive on lore.kernel.org Archives are clonable: git clone --mirror https://lore.kernel.org/linux-arm-msm/0 linux-arm-msm/git/0.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 linux-arm-msm linux-arm-msm/ https://lore.kernel.org/linux-arm-msm \ linux-arm-msm@vger.kernel.org public-inbox-index linux-arm-msm Example config snippet for mirrors Newsgroup available over NNTP: nntp://nntp.lore.kernel.org/org.kernel.vger.linux-arm-msm AGPL code for this site: git clone https://public-inbox.org/public-inbox.git