Linux-ARM-MSM Archive on lore.kernel.org
 help / color / Atom feed
From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>,
	Hai Li <hali@codeaurora.org>, Rob Clark <robdclark@gmail.com>,
	Sean Paul <sean@poorly.run>, Sean Paul <seanpaul@chromium.org>,
	Sasha Levin <sashal@kernel.org>,
	linux-arm-msm@vger.kernel.org, dri-devel@lists.freedesktop.org,
	freedreno@lists.freedesktop.org
Subject: [PATCH AUTOSEL 4.9 217/251] drm/msm/dsi: Implement reset correctly
Date: Thu, 16 Jan 2020 12:36:06 -0500
Message-ID: <20200116173641.22137-177-sashal@kernel.org> (raw)
In-Reply-To: <20200116173641.22137-1-sashal@kernel.org>

From: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>

[ Upstream commit 78e31c42261779a01bc73472d0f65f15378e9de3 ]

On msm8998, vblank timeouts are observed because the DSI controller is not
reset properly, which ends up stalling the MDP.  This is because the reset
logic is not correct per the hardware documentation.

The documentation states that after asserting reset, software should wait
some time (no indication of how long), or poll the status register until it
returns 0 before deasserting reset.

wmb() is insufficient for this purpose since it just ensures ordering, not
timing between writes.  Since asserting and deasserting reset occurs on the
same register, ordering is already guaranteed by the architecture, making
the wmb extraneous.

Since we would define a timeout for polling the status register to avoid a
possible infinite loop, lets just use a static delay of 20 ms, since 16.666
ms is the time available to process one frame at 60 fps.

Fixes: a689554ba6ed ("drm/msm: Initial add DSI connector support")
Cc: Hai Li <hali@codeaurora.org>
Cc: Rob Clark <robdclark@gmail.com>
Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Reviewed-by: Sean Paul <sean@poorly.run>
[seanpaul renamed RESET_DELAY to DSI_RESET_TOGGLE_DELAY_MS]
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191011133939.16551-1-jeffrey.l.hugo@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/msm/dsi/dsi_host.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c b/drivers/gpu/drm/msm/dsi/dsi_host.c
index 6f240021705b..e49b414c012c 100644
--- a/drivers/gpu/drm/msm/dsi/dsi_host.c
+++ b/drivers/gpu/drm/msm/dsi/dsi_host.c
@@ -33,6 +33,8 @@
 #include "sfpb.xml.h"
 #include "dsi_cfg.h"
 
+#define DSI_RESET_TOGGLE_DELAY_MS 20
+
 static int dsi_get_version(const void __iomem *base, u32 *major, u32 *minor)
 {
 	u32 ver;
@@ -909,7 +911,7 @@ static void dsi_sw_reset(struct msm_dsi_host *msm_host)
 	wmb(); /* clocks need to be enabled before reset */
 
 	dsi_write(msm_host, REG_DSI_RESET, 1);
-	wmb(); /* make sure reset happen */
+	msleep(DSI_RESET_TOGGLE_DELAY_MS); /* make sure reset happen */
 	dsi_write(msm_host, REG_DSI_RESET, 0);
 }
 
@@ -1288,7 +1290,7 @@ static void dsi_sw_reset_restore(struct msm_dsi_host *msm_host)
 
 	/* dsi controller can only be reset while clocks are running */
 	dsi_write(msm_host, REG_DSI_RESET, 1);
-	wmb();	/* make sure reset happen */
+	msleep(DSI_RESET_TOGGLE_DELAY_MS); /* make sure reset happen */
 	dsi_write(msm_host, REG_DSI_RESET, 0);
 	wmb();	/* controller out of reset */
 	dsi_write(msm_host, REG_DSI_CTRL, data0);
-- 
2.20.1


      parent reply index

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <20200116173641.22137-1-sashal@kernel.org>
2020-01-16 17:35 ` [PATCH AUTOSEL 4.9 153/251] drm/msm/mdp5: Fix mdp5_cfg_init error return Sasha Levin
2020-01-16 17:35 ` [PATCH AUTOSEL 4.9 158/251] drm/msm/a3xx: remove TPL1 regs from snapshot Sasha Levin
2020-01-16 17:35 ` [PATCH AUTOSEL 4.9 161/251] clk: qcom: Fix -Wunused-const-variable Sasha Levin
2020-01-16 17:36 ` Sasha Levin [this message]

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200116173641.22137-177-sashal@kernel.org \
    --to=sashal@kernel.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=freedreno@lists.freedesktop.org \
    --cc=hali@codeaurora.org \
    --cc=jeffrey.l.hugo@gmail.com \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robdclark@gmail.com \
    --cc=sean@poorly.run \
    --cc=seanpaul@chromium.org \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-ARM-MSM Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-arm-msm/0 linux-arm-msm/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-arm-msm linux-arm-msm/ https://lore.kernel.org/linux-arm-msm \
		linux-arm-msm@vger.kernel.org
	public-inbox-index linux-arm-msm

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-arm-msm


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git