Linux-ARM-MSM Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH v3 0/4] Add QMP V3 USB3 PHY support for SC7180
@ 2020-02-12 11:21 Sandeep Maheswaram
  2020-02-12 11:21 ` [PATCH v3 1/4] dt-bindings: phy: qcom,qmp: Convert QMP phy bindings to yaml Sandeep Maheswaram
                   ` (4 more replies)
  0 siblings, 5 replies; 13+ messages in thread
From: Sandeep Maheswaram @ 2020-02-12 11:21 UTC (permalink / raw)
  To: Andy Gross, Bjorn Andersson, Kishon Vijay Abraham I, Rob Herring,
	Mark Rutland, Stephen Boyd, Doug Anderson, Matthias Kaehlcke
  Cc: linux-arm-msm, linux-kernel, devicetree, Manu Gautam, Sandeep Maheswaram

Add QMP V3 USB3 PHY entries for SC7180 in phy driver and
device tree bindings.

changes in v3:
*Addressed Rob's comments in yaml file.
*Sepearated the SC7180 support in yaml patch.
*corrected the phy reset entries in device tree.

changes in v2:
*Remove global phy reset in QMP phy.
*Convert QMP phy bindings to yaml.

Sandeep Maheswaram (4):
  dt-bindings: phy: qcom,qmp: Convert QMP phy bindings to yaml
  dt-bindings: phy: qcom,qmp: Add support for SC7180
  phy: qcom-qmp: Add QMP V3 USB3 PHY support for SC7180
  arm64: dts: qcom: sc7180: Correct qmp phy reset entries

 .../devicetree/bindings/phy/qcom,qmp-phy.yaml      | 287 +++++++++++++++++++++
 .../devicetree/bindings/phy/qcom-qmp-phy.txt       | 227 ----------------
 arch/arm64/boot/dts/qcom/sc7180.dtsi               |   4 +-
 drivers/phy/qualcomm/phy-qcom-qmp.c                |  38 +++
 4 files changed, 327 insertions(+), 229 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml
 delete mode 100644 Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt

-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation


^ permalink raw reply	[flat|nested] 13+ messages in thread

end of thread, back to index

Thread overview: 13+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-02-12 11:21 [PATCH v3 0/4] Add QMP V3 USB3 PHY support for SC7180 Sandeep Maheswaram
2020-02-12 11:21 ` [PATCH v3 1/4] dt-bindings: phy: qcom,qmp: Convert QMP phy bindings to yaml Sandeep Maheswaram
2020-02-12 20:16   ` Matthias Kaehlcke
2020-02-13 20:42   ` Rob Herring
2020-02-12 11:21 ` [PATCH v3 2/4] dt-bindings: phy: qcom,qmp: Add support for SC7180 Sandeep Maheswaram
2020-02-12 20:30   ` Matthias Kaehlcke
2020-02-18 23:05   ` Rob Herring
2020-02-12 11:21 ` [PATCH v3 3/4] phy: qcom-qmp: Add QMP V3 USB3 PHY " Sandeep Maheswaram
2020-02-12 20:52   ` Matthias Kaehlcke
2020-02-12 11:21 ` [PATCH v3 4/4] arm64: dts: qcom: sc7180: Correct qmp phy reset entries Sandeep Maheswaram
2020-02-12 20:56   ` Matthias Kaehlcke
2020-03-05 18:57 ` [PATCH v3 0/4] Add QMP V3 USB3 PHY support for SC7180 Matthias Kaehlcke
2020-03-06 11:21   ` Sandeep Maheswaram (Temp)

Linux-ARM-MSM Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-arm-msm/0 linux-arm-msm/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-arm-msm linux-arm-msm/ https://lore.kernel.org/linux-arm-msm \
		linux-arm-msm@vger.kernel.org
	public-inbox-index linux-arm-msm

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-arm-msm


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git