Linux-ARM-MSM Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH] clk: qcom: clk-rpmh: Wait for completion when enabling clocks
@ 2020-02-15  2:12 Mike Tipton
  2020-02-15  7:32 ` Bjorn Andersson
  2020-03-09 21:10 ` Stephen Boyd
  0 siblings, 2 replies; 3+ messages in thread
From: Mike Tipton @ 2020-02-15  2:12 UTC (permalink / raw)
  To: sboyd, tdas
  Cc: bjorn.andersson, mturquette, agross, linux-arm-msm, linux-clk,
	linux-kernel, Mike Tipton

The current implementation always uses rpmh_write_async, which doesn't
wait for completion. That's fine for disable requests since there's no
immediate need for the clocks and they can be disabled in the
background. However, for enable requests we need to ensure the clocks
are actually enabled before returning to the client. Otherwise, clients
can end up accessing their HW before the necessary clocks are enabled,
which can lead to bus errors.

Use the synchronous version of this API (rpmh_write) for enable requests
in the active set to ensure completion.

Completion isn't required for sleep/wake sets, since they don't take
effect until after we enter sleep. All rpmh requests are automatically
flushed prior to entering sleep.

Fixes: 9c7e47025a6b ("clk: qcom: clk-rpmh: Add QCOM RPMh clock driver")
Signed-off-by: Mike Tipton <mdtipton@codeaurora.org>
---
 drivers/clk/qcom/clk-rpmh.c | 18 ++++++++++++++++--
 1 file changed, 16 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/qcom/clk-rpmh.c b/drivers/clk/qcom/clk-rpmh.c
index 12bd8715dece..3137595a736b 100644
--- a/drivers/clk/qcom/clk-rpmh.c
+++ b/drivers/clk/qcom/clk-rpmh.c
@@ -143,6 +143,19 @@ static inline bool has_state_changed(struct clk_rpmh *c, u32 state)
 		!= (c->aggr_state & BIT(state));
 }
 
+static int clk_rpmh_send(struct clk_rpmh *c, enum rpmh_state state,
+			 struct tcs_cmd *cmd, bool wait_for_completion)
+{
+	int ret;
+
+	if (wait_for_completion)
+		ret = rpmh_write(c->dev, state, cmd, 1);
+	else
+		ret = rpmh_write_async(c->dev, state, cmd, 1);
+
+	return ret;
+}
+
 static int clk_rpmh_send_aggregate_command(struct clk_rpmh *c)
 {
 	struct tcs_cmd cmd = { 0 };
@@ -159,7 +172,8 @@ static int clk_rpmh_send_aggregate_command(struct clk_rpmh *c)
 			if (cmd_state & BIT(state))
 				cmd.data = on_val;
 
-			ret = rpmh_write_async(c->dev, state, &cmd, 1);
+			ret = clk_rpmh_send(c, state, &cmd,
+				cmd_state && state == RPMH_ACTIVE_ONLY_STATE);
 			if (ret) {
 				dev_err(c->dev, "set %s state of %s failed: (%d)\n",
 					!state ? "sleep" :
@@ -267,7 +281,7 @@ static int clk_rpmh_bcm_send_cmd(struct clk_rpmh *c, bool enable)
 	cmd.addr = c->res_addr;
 	cmd.data = BCM_TCS_CMD(1, enable, 0, cmd_state);
 
-	ret = rpmh_write_async(c->dev, RPMH_ACTIVE_ONLY_STATE, &cmd, 1);
+	ret = clk_rpmh_send(c, RPMH_ACTIVE_ONLY_STATE, &cmd, enable);
 	if (ret) {
 		dev_err(c->dev, "set active state of %s failed: (%d)\n",
 			c->res_name, ret);
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

^ permalink raw reply	[flat|nested] 3+ messages in thread

end of thread, back to index

Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-02-15  2:12 [PATCH] clk: qcom: clk-rpmh: Wait for completion when enabling clocks Mike Tipton
2020-02-15  7:32 ` Bjorn Andersson
2020-03-09 21:10 ` Stephen Boyd

Linux-ARM-MSM Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-arm-msm/0 linux-arm-msm/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-arm-msm linux-arm-msm/ https://lore.kernel.org/linux-arm-msm \
		linux-arm-msm@vger.kernel.org
	public-inbox-index linux-arm-msm

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-arm-msm


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git