linux-arm-msm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH v2 1/2] net: mdio: add ipq8064 mdio driver
@ 2020-02-20 17:07 Ansuel Smith
  2020-02-20 17:07 ` [PATCH v2 2/2] Documentation: devictree: Add ipq806x mdio bindings Ansuel Smith
  0 siblings, 1 reply; 3+ messages in thread
From: Ansuel Smith @ 2020-02-20 17:07 UTC (permalink / raw)
  Cc: Ansuel Smith, Andy Gross, Bjorn Andersson, David S. Miller,
	Rob Herring, Mark Rutland, Andrew Lunn, Florian Fainelli,
	Heiner Kallweit, Russell King, linux-arm-msm, netdev, devicetree,
	linux-kernel

Currently ipq806x soc use generi bitbang driver to
comunicate with the gmac ethernet interface.
Add a dedicated driver created by chunkeey to fix this.

Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
---
 drivers/net/phy/Kconfig        |   8 ++
 drivers/net/phy/Makefile       |   1 +
 drivers/net/phy/mdio-ipq8064.c | 163 +++++++++++++++++++++++++++++++++
 3 files changed, 172 insertions(+)
 create mode 100644 drivers/net/phy/mdio-ipq8064.c

diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index 9dabe03a668c..ec2a5493a7e8 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -157,6 +157,14 @@ config MDIO_I2C
 
 	  This is library mode.
 
+config MDIO_IPQ8064
+	tristate "Qualcomm IPQ8064 MDIO interface support"
+	depends on HAS_IOMEM && OF_MDIO
+	depends on MFD_SYSCON
+	help
+	  This driver supports the MDIO interface found in the network
+	  interface units of the IPQ8064 SoC
+
 config MDIO_MOXART
 	tristate "MOXA ART MDIO interface support"
 	depends on ARCH_MOXART || COMPILE_TEST
diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile
index fe5badf13b65..8f02bd2089f3 100644
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -36,6 +36,7 @@ obj-$(CONFIG_MDIO_CAVIUM)	+= mdio-cavium.o
 obj-$(CONFIG_MDIO_GPIO)		+= mdio-gpio.o
 obj-$(CONFIG_MDIO_HISI_FEMAC)	+= mdio-hisi-femac.o
 obj-$(CONFIG_MDIO_I2C)		+= mdio-i2c.o
+obj-$(CONFIG_MDIO_IPQ8064)	+= mdio-ipq8064.o
 obj-$(CONFIG_MDIO_MOXART)	+= mdio-moxart.o
 obj-$(CONFIG_MDIO_MSCC_MIIM)	+= mdio-mscc-miim.o
 obj-$(CONFIG_MDIO_OCTEON)	+= mdio-octeon.o
diff --git a/drivers/net/phy/mdio-ipq8064.c b/drivers/net/phy/mdio-ipq8064.c
new file mode 100644
index 000000000000..e974a6f5d5ef
--- /dev/null
+++ b/drivers/net/phy/mdio-ipq8064.c
@@ -0,0 +1,163 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Qualcomm IPQ8064 MDIO interface driver
+//
+// Copyright (C) 2019 Christian Lamparter <chunkeey@gmail.com>
+
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/of_mdio.h>
+#include <linux/phy.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/syscon.h>
+
+/* MII address register definitions */
+#define MII_ADDR_REG_ADDR                       0x10
+#define MII_BUSY                                BIT(0)
+#define MII_WRITE                               BIT(1)
+#define MII_CLKRANGE_60_100M                    (0 << 2)
+#define MII_CLKRANGE_100_150M                   (1 << 2)
+#define MII_CLKRANGE_20_35M                     (2 << 2)
+#define MII_CLKRANGE_35_60M                     (3 << 2)
+#define MII_CLKRANGE_150_250M                   (4 << 2)
+#define MII_CLKRANGE_250_300M                   (5 << 2)
+#define MII_CLKRANGE_MASK			GENMASK(4, 2)
+#define MII_REG_SHIFT				6
+#define MII_REG_MASK				GENMASK(10, 6)
+#define MII_ADDR_SHIFT				11
+#define MII_ADDR_MASK				GENMASK(15, 11)
+
+#define MII_DATA_REG_ADDR                       0x14
+
+#define MII_MDIO_DELAY                          (1000)
+#define MII_MDIO_RETRY                          (10)
+
+struct ipq8064_mdio {
+	struct regmap *base; /* NSS_GMAC0_BASE */
+};
+
+static int
+ipq8064_mdio_wait_busy(struct ipq8064_mdio *priv)
+{
+	u32 busy;
+
+	return regmap_read_poll_timeout(priv->base, MII_ADDR_REG_ADDR, busy,
+				   !(busy & MII_BUSY), MII_MDIO_DELAY,
+				   MII_MDIO_RETRY * USEC_PER_MSEC);
+}
+
+static int
+ipq8064_mdio_read(struct mii_bus *bus, int phy_addr, int reg_offset)
+{
+	struct ipq8064_mdio *priv = bus->priv;
+	u32 miiaddr = MII_BUSY | MII_CLKRANGE_250_300M;
+	u32 ret_val;
+	int err;
+
+	/* Reject clause 45 */
+	if (reg_offset & MII_ADDR_C45)
+		return -EOPNOTSUPP;
+
+	miiaddr |= ((phy_addr << MII_ADDR_SHIFT) & MII_ADDR_MASK) |
+		   ((reg_offset << MII_REG_SHIFT) & MII_REG_MASK);
+
+	regmap_write(priv->base, MII_ADDR_REG_ADDR, miiaddr);
+	usleep_range(10, 20);
+
+	err = ipq8064_mdio_wait_busy(priv);
+	if (err)
+		return err;
+
+	regmap_read(priv->base, MII_DATA_REG_ADDR, &ret_val);
+	return (int)ret_val;
+}
+
+static int
+ipq8064_mdio_write(struct mii_bus *bus, int phy_addr, int reg_offset, u16 data)
+{
+	struct ipq8064_mdio *priv = bus->priv;
+	u32 miiaddr = MII_WRITE | MII_BUSY | MII_CLKRANGE_250_300M;
+
+	/* Reject clause 45 */
+	if (reg_offset & MII_ADDR_C45)
+		return -EOPNOTSUPP;
+
+	regmap_write(priv->base, MII_DATA_REG_ADDR, data);
+
+	miiaddr |= ((phy_addr << MII_ADDR_SHIFT) & MII_ADDR_MASK) |
+		   ((reg_offset << MII_REG_SHIFT) & MII_REG_MASK);
+
+	regmap_write(priv->base, MII_ADDR_REG_ADDR, miiaddr);
+	usleep_range(10, 20);
+
+	return ipq8064_mdio_wait_busy(priv);
+}
+
+static int
+ipq8064_mdio_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct ipq8064_mdio *priv;
+	struct mii_bus *bus;
+	int ret;
+
+	bus = devm_mdiobus_alloc_size(&pdev->dev, sizeof(*priv));
+	if (!bus)
+		return -ENOMEM;
+
+	bus->name = "ipq8064_mdio_bus";
+	bus->read = ipq8064_mdio_read;
+	bus->write = ipq8064_mdio_write;
+	snprintf(bus->id, MII_BUS_ID_SIZE, "%s-mii", dev_name(&pdev->dev));
+	bus->parent = &pdev->dev;
+
+	priv = bus->priv;
+	priv->base = syscon_node_to_regmap(np);
+	if (IS_ERR_OR_NULL(priv->base)) {
+		priv->base = syscon_regmap_lookup_by_phandle(np, "master");
+		if (IS_ERR_OR_NULL(priv->base)) {
+			dev_err(&pdev->dev, "master phandle not found\n");
+			return -EINVAL;
+		}
+	}
+
+	ret = of_mdiobus_register(bus, np);
+	if (ret)
+		return ret;
+
+	platform_set_drvdata(pdev, bus);
+	return 0;
+}
+
+static int
+ipq8064_mdio_remove(struct platform_device *pdev)
+{
+	struct mii_bus *bus = platform_get_drvdata(pdev);
+
+	mdiobus_unregister(bus);
+
+	return 0;
+}
+
+static const struct of_device_id ipq8064_mdio_dt_ids[] = {
+	{ .compatible = "qcom,ipq8064-mdio" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, ipq8064_mdio_dt_ids);
+
+static struct platform_driver ipq8064_mdio_driver = {
+	.probe = ipq8064_mdio_probe,
+	.remove = ipq8064_mdio_remove,
+	.driver = {
+		.name = "ipq8064-mdio",
+		.of_match_table = ipq8064_mdio_dt_ids,
+	},
+};
+
+module_platform_driver(ipq8064_mdio_driver);
+
+MODULE_DESCRIPTION("Qualcomm IPQ8064 MDIO interface driver");
+MODULE_AUTHOR("Christian Lamparter <chunkeey@gmail.com>");
+MODULE_LICENSE("GPL");
-- 
2.25.0


^ permalink raw reply related	[flat|nested] 3+ messages in thread

* [PATCH v2 2/2] Documentation: devictree: Add ipq806x mdio bindings
  2020-02-20 17:07 [PATCH v2 1/2] net: mdio: add ipq8064 mdio driver Ansuel Smith
@ 2020-02-20 17:07 ` Ansuel Smith
  2020-02-20 20:36   ` Rob Herring
  0 siblings, 1 reply; 3+ messages in thread
From: Ansuel Smith @ 2020-02-20 17:07 UTC (permalink / raw)
  Cc: Ansuel Smith, Andy Gross, Bjorn Andersson, David S. Miller,
	Rob Herring, Mark Rutland, Andrew Lunn, Florian Fainelli,
	Heiner Kallweit, Russell King, linux-arm-msm, netdev, devicetree,
	linux-kernel

Add documentations for ipq806x mdio driver.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
---
 .../bindings/net/qcom,ipq8064-mdio.yaml       | 52 +++++++++++++++++++
 1 file changed, 52 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/net/qcom,ipq8064-mdio.yaml

diff --git a/Documentation/devicetree/bindings/net/qcom,ipq8064-mdio.yaml b/Documentation/devicetree/bindings/net/qcom,ipq8064-mdio.yaml
new file mode 100644
index 000000000000..c5a21c0b5325
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/qcom,ipq8064-mdio.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/qcom,ipq8064-mdio.txt
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm ipq806x MDIO bus controller
+
+description: |+
+  The ipq806x soc have a MDIO dedicated controller that is
+  used to comunicate with the gmac phy conntected.
+  Child nodes of this MDIO bus controller node are standard
+  Ethernet PHY device nodes as described in
+  Documentation/devicetree/bindings/net/phy.txt
+
+allOf:
+  - $ref: "mdio.yaml#"
+
+properties:
+  compatible:
+    const: qcom,ipq8064-mdio
+  reg:
+    maxItems: 1
+    description: address and length of the register set for the device
+  clocks:
+    maxItems: 1
+    description: A reference to the clock supplying the MDIO bus controller
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - "#address-cells"
+  - "#size-cells"
+
+examples:
+  - |
+    mdio@37000000 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        compatible = "qcom,ipq8064-mdio", "syscon";
+        reg = <0x37000000 0x200000>;
+        resets = <&gcc GMAC_CORE1_RESET>;
+        reset-names = "stmmaceth";
+        clocks = <&gcc GMAC_CORE1_CLK>;
+
+        switch@10 {
+            compatible = "qca,qca8337";
+            ...
+        }
+    };
\ No newline at end of file
-- 
2.25.0


^ permalink raw reply related	[flat|nested] 3+ messages in thread

* Re: [PATCH v2 2/2] Documentation: devictree: Add ipq806x mdio bindings
  2020-02-20 17:07 ` [PATCH v2 2/2] Documentation: devictree: Add ipq806x mdio bindings Ansuel Smith
@ 2020-02-20 20:36   ` Rob Herring
  0 siblings, 0 replies; 3+ messages in thread
From: Rob Herring @ 2020-02-20 20:36 UTC (permalink / raw)
  To: Ansuel Smith
  Cc: Ansuel Smith, Andy Gross, Bjorn Andersson, David S. Miller,
	Mark Rutland, Andrew Lunn, Florian Fainelli, Heiner Kallweit,
	Russell King, linux-arm-msm, netdev, devicetree, linux-kernel

On Thu, 20 Feb 2020 18:07:29 +0100, Ansuel Smith wrote:
> Add documentations for ipq806x mdio driver.
> 
> Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
> ---
>  .../bindings/net/qcom,ipq8064-mdio.yaml       | 52 +++++++++++++++++++
>  1 file changed, 52 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/net/qcom,ipq8064-mdio.yaml
> 

My bot found errors running 'make dt_binding_check' on your patch:

warning: no schema found in file: Documentation/devicetree/bindings/net/qcom,ipq8064-mdio.yaml
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/net/qcom,ipq8064-mdio.yaml: ignoring, error in schema: $id
Documentation/devicetree/bindings/display/simple-framebuffer.example.dts:21.16-37.11: Warning (chosen_node_is_root): /example-0/chosen: chosen node must be at root node
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/net/qcom,ipq8064-mdio.yaml: $id: 'http://devicetree.org/schemas/net/qcom,ipq8064-mdio.txt' does not match 'http://devicetree.org/schemas/.*\\.yaml#'
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/net/qcom,ipq8064-mdio.yaml: 'maintainers' is a required property
Documentation/devicetree/bindings/Makefile:12: recipe for target 'Documentation/devicetree/bindings/net/qcom,ipq8064-mdio.example.dts' failed
make[1]: *** [Documentation/devicetree/bindings/net/qcom,ipq8064-mdio.example.dts] Error 1
Makefile:1263: recipe for target 'dt_binding_check' failed
make: *** [dt_binding_check] Error 2

See https://patchwork.ozlabs.org/patch/1241574
Please check and re-submit.

^ permalink raw reply	[flat|nested] 3+ messages in thread

end of thread, other threads:[~2020-02-20 20:36 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-02-20 17:07 [PATCH v2 1/2] net: mdio: add ipq8064 mdio driver Ansuel Smith
2020-02-20 17:07 ` [PATCH v2 2/2] Documentation: devictree: Add ipq806x mdio bindings Ansuel Smith
2020-02-20 20:36   ` Rob Herring

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).