[RFT PATCH 2/9] drivers: qcom: rpmh-rsc: Document the register layout better

[Douglas Anderson <dianders@chromium.org>]

Perhaps it's just me, it took a really long time to understand what
the register layout of rpmh-rsc was just from the #defines.  It's much
easier to understand this if we define some structures.  At the moment
these structures aren't used at all (so think of them as
documentation), but to me they really help in understanding.

These structures were all figured out from the #defines and
reading/writing functions.  Anything that wasn't used in the driver is
marked as "opaque".

Signed-off-by: Douglas Anderson <dianders@chromium.org>
---

 drivers/soc/qcom/rpmh-rsc.c | 67 +++++++++++++++++++++++++++++++++++++
 1 file changed, 67 insertions(+)

diff --git a/drivers/soc/qcom/rpmh-rsc.c b/drivers/soc/qcom/rpmh-rsc.c
index 5c88b8cd5bf8..0a409988d103 100644
--- a/drivers/soc/qcom/rpmh-rsc.c
+++ b/drivers/soc/qcom/rpmh-rsc.c
@@ -61,6 +61,73 @@
 #define CMD_STATUS_ISSUED		BIT(8)
 #define CMD_STATUS_COMPL		BIT(16)
 
+/*
+ * The following structures aren't used in the code anywhere (right now), but
+ * help to document how the register space is laid out.  In other words it's
+ * another way to visualize the "Register offsets".
+ *
+ * Couch this in a bogus #ifdef instead of comments to allow the embedded
+ * comments to work.
+ */
+#ifdef STRUCTS_TO_DOCUMENT_HW_REGISTER_MAP
+
+/* 0x14 = 20 bytes big (see RSC_DRV_CMD_OFFSET) */
+struct tcs_cmd_hw {
+	u32 msgid;
+	u32 addr;
+	u32 data;
+	u32 status;
+	u32 resp_data;
+};
+
+/* 0x2a0 = 672 bytes big (see RSC_DRV_TCS_OFFSET) */
+struct tcs_hw {
+	/*
+	 * These are only valid on TCS 0 but are present everywhere.
+	 * Contains 1 bit per TCS.
+	 */
+	u32 irq_enable;
+	u32 irq_status;
+	u32 irq_clear;			/* Write only; write 1 to clear */
+
+	char opaque_00c[0x4];
+
+	u32 cmd_wait_for_cmpl;		/* Bit field, 1 bit per command */
+	u32 control;
+	u32 status;			/* status is 0 if tcs is busy */
+	u32 cmd_enable;			/* Bit field, 1 bit per command */
+
+	char opaque_01c[0x10];
+
+	struct tcs_cmd_hw tcs_cmd_hw[MAX_CMDS_PER_TCS];
+
+	char opaque_170[0x130];
+};
+
+/* Example for sc7180 based on current dts */
+struct rpmh_rsc_hw_sc7180 {
+	char opaque_000[0xc];
+
+	u32 prnt_chld_config;
+
+	char opaque_010[0xcf0];
+
+	/*
+	 * Offset 0xd00 aka qcom,tcs-offset from device tree.  Presumably
+	 * could be different for different SoCs?  Currently driver stores
+	 * a pointer to the first tcs in tcs_base.
+	 *
+	 * Count of various TCS entries also comes from dts.
+	 */
+	struct tcs_hw active[2];
+	struct tcs_hw sleep[3];
+	struct tcs_hw wake[3];
+	struct tcs_hw control[1];
+};
+
+#endif /* STRUCTS_TO_DOCUMENT_HW_REGISTER_MAP */
+
+
 static u32 read_tcs_cmd(struct rsc_drv *drv, int reg, int tcs_id, int cmd_id)
 {
 	return readl_relaxed(drv->tcs_base + RSC_DRV_TCS_OFFSET * tcs_id + reg +
-- 
2.25.1.481.gfbce0eb801-goog