From: Bjorn Andersson <bjorn.andersson@linaro.org>
To: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: agross@kernel.org, linux-arm-msm@vger.kernel.org,
devicetree@vger.kernel.org, robh+dt@kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH 4/4] arm64: dts: qcom: db845c: add Low speed expansion i2c and spi nodes
Date: Fri, 6 Mar 2020 18:47:33 -0800 [thread overview]
Message-ID: <20200307024733.GE1094083@builder> (raw)
In-Reply-To: <20200305145344.14670-5-srinivas.kandagatla@linaro.org>
On Thu 05 Mar 06:53 PST 2020, Srinivas Kandagatla wrote:
> This patch adds support UART0, I2C0, I2C1 and SPI0 available
> on Low Speed expansion connector.
>
Applied, after fixing the sort order. Thanks for posting this!
Regards,
Bjorn
> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
> ---
> arch/arm64/boot/dts/qcom/sdm845-db845c.dts | 34 ++++++++++++++++++++++
> 1 file changed, 34 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
> index 350d3ea60235..fd2bdf10a4d9 100644
> --- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
> +++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
> @@ -434,6 +434,24 @@
> vdda-pll-supply = <&vreg_l26a_1p2>;
> };
>
> +&i2c11 {
> + /* On Low speed expansion */
> + label = "LS-I2C1";
> + status = "okay";
> +};
> +
> +&i2c14 {
> + /* On Low speed expansion */
> + label = "LS-I2C0";
> + status = "okay";
> +};
> +
> +&spi2 {
> + /* On Low speed expansion */
> + label = "LS-SPI0";
> + status = "okay";
> +};
> +
> &pm8998_gpio {
> vol_up_pin_a: vol-up-active {
> pins = "gpio6";
> @@ -574,6 +592,11 @@
> };
> };
>
> +&uart3 {
> + label = "LS-UART0";
> + status = "disabled";
> +};
> +
> &uart6 {
> status = "okay";
>
> @@ -589,6 +612,7 @@
> };
>
> &uart9 {
> + label = "LS-UART1";
> status = "okay";
> };
>
> @@ -674,6 +698,16 @@
> };
>
> /* PINCTRL - additions to nodes defined in sdm845.dtsi */
> +&qup_spi2_default {
> + drive-strength = <16>;
> +};
> +
> +&qup_uart3_default{
> + pinmux {
> + pins = "gpio41", "gpio42", "gpio43", "gpio44";
> + function = "qup3";
> + };
> +};
>
> &qup_uart6_default {
> pinmux {
> --
> 2.21.0
>
prev parent reply other threads:[~2020-03-07 2:47 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-05 14:53 [PATCH 0/4] arm64: dts: qcom: sdm845: add audio support Srinivas Kandagatla
2020-03-05 14:53 ` [PATCH 1/4] arm64: dts: qcom: sdm845: Add ADSP " Srinivas Kandagatla
2020-03-07 2:37 ` Bjorn Andersson
2020-03-05 14:53 ` [PATCH 2/4] arm64: dts: qcom: c630: Enable " Srinivas Kandagatla
2020-03-07 2:43 ` Bjorn Andersson
2020-03-05 14:53 ` [PATCH 3/4] arm64: dts: qcom: db845c: add analog " Srinivas Kandagatla
2020-03-05 14:53 ` [PATCH 4/4] arm64: dts: qcom: db845c: add Low speed expansion i2c and spi nodes Srinivas Kandagatla
2020-03-07 2:47 ` Bjorn Andersson [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200307024733.GE1094083@builder \
--to=bjorn.andersson@linaro.org \
--cc=agross@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=srinivas.kandagatla@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).