linux-arm-msm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Bjorn Andersson <bjorn.andersson@linaro.org>
To: John Stultz <john.stultz@linaro.org>
Cc: lkml <linux-kernel@vger.kernel.org>, Todd Kjos <tkjos@google.com>,
	Saravana Kannan <saravanak@google.com>,
	Andy Gross <agross@kernel.org>,
	Rajendra Nayak <rnayak@codeaurora.org>,
	linux-arm-msm@vger.kernel.org
Subject: Re: [PATCH v3 3/3] soc: qcom: rpmhpd: Allow RPMHPD driver to be loaded as a module
Date: Tue, 14 Apr 2020 15:25:17 -0700	[thread overview]
Message-ID: <20200414222517.GN576963@builder.lan> (raw)
In-Reply-To: <20200326224459.105170-4-john.stultz@linaro.org>

On Thu 26 Mar 15:44 PDT 2020, John Stultz wrote:

> This patch allow the rpmhpd driver to be loaded as a permenent
> module. Meaning it can be loaded from a module, but then cannot
> be unloaded.
> 
> Ideally, it would include a remove hook and related logic, but
> apparently the genpd code isn't able to track usage and cleaning
> things up?
> 
> So making it a permenent module at least improves things slightly
> over requiring it to be a built in driver.
> 
> Feedback would be appreciated!
> 
> Cc: Todd Kjos <tkjos@google.com>
> Cc: Saravana Kannan <saravanak@google.com>
> Cc: Andy Gross <agross@kernel.org>
> Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
> Cc: Rajendra Nayak <rnayak@codeaurora.org>
> Cc: linux-arm-msm@vger.kernel.org
> Signed-off-by: John Stultz <john.stultz@linaro.org>

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>

and applied.

Regards,
Bjorn

> ---
>  drivers/soc/qcom/Kconfig  | 2 +-
>  drivers/soc/qcom/rpmhpd.c | 5 +++++
>  2 files changed, 6 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig
> index ac91eaf810f7..ffc04285840b 100644
> --- a/drivers/soc/qcom/Kconfig
> +++ b/drivers/soc/qcom/Kconfig
> @@ -114,7 +114,7 @@ config QCOM_RPMH
>  	  help apply the aggregated state on the resource.
>  
>  config QCOM_RPMHPD
> -	bool "Qualcomm RPMh Power domain driver"
> +	tristate "Qualcomm RPMh Power domain driver"
>  	depends on QCOM_RPMH && QCOM_COMMAND_DB
>  	help
>  	  QCOM RPMh Power domain driver to support power-domains with
> diff --git a/drivers/soc/qcom/rpmhpd.c b/drivers/soc/qcom/rpmhpd.c
> index 4d264d0672c4..0bb12d5870a7 100644
> --- a/drivers/soc/qcom/rpmhpd.c
> +++ b/drivers/soc/qcom/rpmhpd.c
> @@ -4,6 +4,7 @@
>  #include <linux/err.h>
>  #include <linux/init.h>
>  #include <linux/kernel.h>
> +#include <linux/module.h>
>  #include <linux/mutex.h>
>  #include <linux/pm_domain.h>
>  #include <linux/slab.h>
> @@ -189,6 +190,7 @@ static const struct of_device_id rpmhpd_match_table[] = {
>  	{ .compatible = "qcom,sm8150-rpmhpd", .data = &sm8150_desc },
>  	{ }
>  };
> +MODULE_DEVICE_TABLE(of, rpmhpd_match_table);
>  
>  static int rpmhpd_send_corner(struct rpmhpd *pd, int state,
>  			      unsigned int corner, bool sync)
> @@ -460,3 +462,6 @@ static int __init rpmhpd_init(void)
>  	return platform_driver_register(&rpmhpd_driver);
>  }
>  core_initcall(rpmhpd_init);
> +
> +MODULE_DESCRIPTION("Qualcomm Technologies, Inc. RPMh Power Domain Driver");
> +MODULE_LICENSE("GPL v2");
> -- 
> 2.17.1
> 

  reply	other threads:[~2020-04-14 22:25 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-03-26 22:44 [PATCH v3 0/3] Allow for rpmpd/rpmh/rpmhpd drivers to be loaded as permenent modules John Stultz
2020-03-26 22:44 ` [PATCH v3 1/3] soc: qcom: rpmpd: Allow RPMPD driver to be loaded as a module John Stultz
2020-04-14 22:21   ` Bjorn Andersson
2020-04-14 22:24     ` John Stultz
2020-04-14 22:32       ` Bjorn Andersson
2020-03-26 22:44 ` [PATCH v3 2/3] soc: qcom: rpmh: Allow RPMH " John Stultz
2020-04-14 22:23   ` Bjorn Andersson
2020-04-15 18:25   ` Matthias Kaehlcke
2020-04-15 19:47     ` John Stultz
2020-03-26 22:44 ` [PATCH v3 3/3] soc: qcom: rpmhpd: Allow RPMHPD " John Stultz
2020-04-14 22:25   ` Bjorn Andersson [this message]
2020-03-26 23:18 ` [PATCH v3 0/3] Allow for rpmpd/rpmh/rpmhpd drivers to be loaded as permenent modules Saravana Kannan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200414222517.GN576963@builder.lan \
    --to=bjorn.andersson@linaro.org \
    --cc=agross@kernel.org \
    --cc=john.stultz@linaro.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=rnayak@codeaurora.org \
    --cc=saravanak@google.com \
    --cc=tkjos@google.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).