linux-arm-msm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Bjorn Andersson <bjorn.andersson@linaro.org>
To: Sibi Sankar <sibis@codeaurora.org>
Cc: agross@kernel.org, robh+dt@kernel.org,
	linux-arm-msm@vger.kernel.org, linux-remoteproc@vger.kernel.org,
	linux-kernel@vger.kernel.org, evgreen@chromium.org,
	ohad@wizery.com, mka@chromium.org, dianders@chromium.org,
	devicetree@vger.kernel.org
Subject: Re: [PATCH 3/5] arm64: dts: qcom: sc7180: Update reserved memory map
Date: Sun, 19 Apr 2020 12:21:37 -0700	[thread overview]
Message-ID: <20200419192137.GF987656@yoga> (raw)
In-Reply-To: <20200417142605.28885-4-sibis@codeaurora.org>

On Fri 17 Apr 07:26 PDT 2020, Sibi Sankar wrote:

> Add missing regions and remove unused regions from the reserved memory
> map, as described in version 5.
> 

Your patch looks good, but I'm quite unhappy with the way these turns
out and we have been ignoring the fact that different devices on the
same platform (with TZ) might come with different firmware versions and
hence different layout of the peripheral memory region.

So how about pushing out at least the peripheral regions to the device's
dts (the others are pretty much static, except when using coreboot)?
That should reduce your patch to 4(?) delete-nodes?

Regards,
Bjorn

> Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
> ---
>  arch/arm64/boot/dts/qcom/sc7180-idp.dts | 63 +++++++++++++++++++
>  arch/arm64/boot/dts/qcom/sc7180.dtsi    | 83 ++++++++++++++++++++++++-
>  2 files changed, 144 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sc7180-idp.dts b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
> index 17eadd80f15de..e613d70cc0198 100644
> --- a/arch/arm64/boot/dts/qcom/sc7180-idp.dts
> +++ b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
> @@ -28,6 +28,69 @@ chosen {
>  	};
>  };
>  
> +/*
> + * Reserved memory changes
> + *
> + * Keep all modifications to the memory map (from sc7180.dtsi) in one place.
> + * Delete all unused memory nodes and re-create atf_mem/venus_mem/camera_mem
> + * and wlan_mem memory nodes.
> + *
> + */
> +
> +/delete-node/ &hyp_mem;
> +/delete-node/ &xbl_mem;
> +/delete-node/ &aop_mem;
> +/delete-node/ &sec_apps_mem;
> +/delete-node/ &tz_mem;
> +/delete-node/ &camera_mem;
> +/delete-node/ &npu_mem;
> +/delete-node/ &venus_mem;
> +/delete-node/ &cdsp_mem;
> +/delete-node/ &adsp_mem;
> +/delete-node/ &wlan_mem;
> +/delete-node/ &ipa_fw_mem;
> +/delete-node/ &ipa_gsi_mem;
> +/delete-node/ &gpu_mem;
> +
> +/* Increase the size from 132 MB to 140 MB */
> +&mpss_mem {
> +	reg = <0x0 0x86000000 0x0 0x8c00000>;
> +};
> +
> +/* Increase the size from 2MB to 8MB */
> +&rmtfs_mem {
> +	reg = <0x0 0x84400000 0x0 0x800000>;
> +};
> +
> +/ {
> +	reserved-memory {
> +		atf_mem: memory@80b00000 {
> +			reg = <0x0 0x80b00000 0x0 0x100000>;
> +			no-map;
> +		};
> +
> +		camera_mem: memory@8ec00000 {
> +			reg = <0x0 0x8ec00000 0x0 0x500000>;
> +			no-map;
> +		};
> +
> +		venus_mem: memory@8f600000 {
> +			reg = <0 0x8f600000 0 0x500000>;
> +			no-map;
> +		};
> +
> +		wlan_mem: memory@94100000 {
> +			reg = <0x0 0x94100000 0x0 0x200000>;
> +			no-map;
> +		};
> +
> +		mba_mem: memory@94400000 {
> +			reg = <0x0 0x94400000 0x0 0x200000>;
> +			no-map;
> +		};
> +	};
> +};
> +
>  &apps_rsc {
>  	pm6150-rpmh-regulators {
>  		compatible = "qcom,pm6150-rpmh-regulators";
> diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> index 853ba6e8a53ca..f73ffd74d4fcd 100644
> --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> @@ -69,18 +69,97 @@ reserved_memory: reserved-memory {
>  		#size-cells = <2>;
>  		ranges;
>  
> +		hyp_mem: memory@80000000 {
> +			reg = <0x0 0x80000000 0x0 0x600000>;
> +			no-map;
> +		};
> +
> +		xbl_mem: memory@80600000 {
> +			reg = <0x0 0x80600000 0x0 0x200000>;
> +			no-map;
> +		};
> +
> +		aop_mem: memory@80800000 {
> +			reg = <0x0 0x80800000 0x0 0x20000>;
> +			no-map;
> +		};
> +
>  		aop_cmd_db_mem: memory@80820000 {
>  			reg = <0x0 0x80820000 0x0 0x20000>;
>  			compatible = "qcom,cmd-db";
>  		};
>  
> +		sec_apps_mem: memory@808ff000 {
> +			reg = <0x0 0x808ff000 0x0 0x1000>;
> +			no-map;
> +		};
> +
>  		smem_mem: memory@80900000 {
>  			reg = <0x0 0x80900000 0x0 0x200000>;
>  			no-map;
>  		};
>  
> -		venus_mem: memory@8f600000 {
> -			reg = <0 0x8f600000 0 0x500000>;
> +		tz_mem: memory@80b00000 {
> +			reg = <0x0 0x80b00000 0x0 0x3900000>;
> +			no-map;
> +		};
> +
> +		rmtfs_mem: memory@84400000 {
> +			compatible = "qcom,rmtfs-mem";
> +			reg = <0x0 0x84400000 0x0 0x200000>;
> +			no-map;
> +
> +			qcom,client-id = <1>;
> +			qcom,vmid = <15>;
> +		};
> +
> +		mpss_mem: memory@86000000 {
> +			reg = <0x0 0x86000000 0x0 0x8400000>;
> +			no-map;
> +		};
> +
> +		camera_mem: memory@8e400000 {
> +			reg = <0x0 0x8e400000 0x0 0x500000>;
> +			no-map;
> +		};
> +
> +		npu_mem: memory@8e900000 {
> +			reg = <0x0 0x8e900000 0x0 0x500000>;
> +			no-map;
> +		};
> +
> +		venus_mem: memory@8ee00000 {
> +			reg = <0x0 0x8ee00000 0x0 0x500000>;
> +			no-map;
> +		};
> +
> +		cdsp_mem: memory@8f300000 {
> +			reg = <0x0 0x8f300000 0x0 0x1e00000>;
> +			no-map;
> +		};
> +
> +		adsp_mem: memory@91100000 {
> +			reg = <0x0 0x91100000 0x0 0x2800000>;
> +			no-map;
> +		};
> +
> +		wlan_mem: memory@93900000 {
> +			reg = <0x0 0x93900000 0x0 0x200000>;
> +			no-map;
> +		};
> +
> +		ipa_fw_mem: memory@93b00000 {
> +			reg = <0x0 0x93b00000 0x0 0x10000>;
> +			no-map;
> +		};
> +
> +		ipa_gsi_mem: memory@93b10000 {
> +			reg = <0x0 0x93b10000 0x0 0x5000>;
> +			no-map;
> +		};
> +
> +		gpu_mem: memory@93b15000 {
> +			reg = <0x0 0x93b15000 0x0 0x2000>;
>  			no-map;
>  		};
>  	};
> -- 
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project

  reply	other threads:[~2020-04-19 19:21 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-04-17 14:26 [PATCH 0/5] Add PAS and MSA based Modem support Sibi Sankar
2020-04-17 14:26 ` [PATCH 1/5] dt-bindings: remoteproc: qcom: Add SC7180 MPSS support Sibi Sankar
2020-04-20  5:38   ` Bjorn Andersson
2020-04-17 14:26 ` [PATCH 2/5] remoteproc: qcom: pas: Add SC7180 Modem support Sibi Sankar
2020-04-20  5:39   ` Bjorn Andersson
2020-04-17 14:26 ` [PATCH 3/5] arm64: dts: qcom: sc7180: Update reserved memory map Sibi Sankar
2020-04-19 19:21   ` Bjorn Andersson [this message]
2020-04-17 14:26 ` [PATCH 4/5] arm64: dts: qcom: sc7180: Add Q6V5 MSS node Sibi Sankar
2020-04-17 14:26 ` [PATCH 5/5] arm64: dts: qcom: sc7180: Update " Sibi Sankar
2020-04-20  5:50   ` Bjorn Andersson
2020-04-21 17:03     ` Sibi Sankar

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200419192137.GF987656@yoga \
    --to=bjorn.andersson@linaro.org \
    --cc=agross@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dianders@chromium.org \
    --cc=evgreen@chromium.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-remoteproc@vger.kernel.org \
    --cc=mka@chromium.org \
    --cc=ohad@wizery.com \
    --cc=robh+dt@kernel.org \
    --cc=sibis@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).