From: Vinod Koul <vkoul@kernel.org>
To: Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@kernel.org>
Cc: linux-arm-msm@vger.kernel.org,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Vinod Koul <vkoul@kernel.org>, Andy Gross <agross@kernel.org>,
Jonathan Marek <jonathan@marek.ca>,
linux-clk@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH 1/2] clk: qcom: gcc: Add GPU and NPU clocks for SM8150
Date: Fri, 24 Apr 2020 10:13:10 +0530 [thread overview]
Message-ID: <20200424044311.2155917-1-vkoul@kernel.org> (raw)
Add the GPU and NPU clocks for SM8150. They were missed in earlier
addition of clock driver.
Signed-off-by: Vinod Koul <vkoul@kernel.org>
---
drivers/clk/qcom/gcc-sm8150.c | 72 +++++++++++++++++++++++++++++++++++
1 file changed, 72 insertions(+)
diff --git a/drivers/clk/qcom/gcc-sm8150.c b/drivers/clk/qcom/gcc-sm8150.c
index ef98fdc51755..5c3dc34c955e 100644
--- a/drivers/clk/qcom/gcc-sm8150.c
+++ b/drivers/clk/qcom/gcc-sm8150.c
@@ -1617,6 +1617,40 @@ static struct clk_branch gcc_gpu_cfg_ahb_clk = {
},
};
+/* external clocks so add BRANCH_HALT_SKIP */
+static struct clk_branch gcc_gpu_gpll0_clk_src = {
+ .halt_check = BRANCH_HALT_SKIP,
+ .clkr = {
+ .enable_reg = 0x52004,
+ .enable_mask = BIT(15),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_gpu_gpll0_clk_src",
+ .parent_hws = (const struct clk_hw *[]){
+ &gpll0.clkr.hw },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+/* these are external clocks so add BRANCH_HALT_SKIP */
+static struct clk_branch gcc_gpu_gpll0_div_clk_src = {
+ .halt_check = BRANCH_HALT_SKIP,
+ .clkr = {
+ .enable_reg = 0x52004,
+ .enable_mask = BIT(16),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_gpu_gpll0_div_clk_src",
+ .parent_hws = (const struct clk_hw *[]){
+ &gcc_gpu_gpll0_clk_src.clkr.hw },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
static struct clk_branch gcc_gpu_iref_clk = {
.halt_reg = 0x8c010,
.halt_check = BRANCH_HALT,
@@ -1699,6 +1733,40 @@ static struct clk_branch gcc_npu_cfg_ahb_clk = {
},
};
+/* external clocks so add BRANCH_HALT_SKIP */
+static struct clk_branch gcc_npu_gpll0_clk_src = {
+ .halt_check = BRANCH_HALT_SKIP,
+ .clkr = {
+ .enable_reg = 0x52004,
+ .enable_mask = BIT(18),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_npu_gpll0_clk_src",
+ .parent_hws = (const struct clk_hw *[]){
+ &gpll0.clkr.hw },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+/* external clocks so add BRANCH_HALT_SKIP */
+static struct clk_branch gcc_npu_gpll0_div_clk_src = {
+ .halt_check = BRANCH_HALT_SKIP,
+ .clkr = {
+ .enable_reg = 0x52004,
+ .enable_mask = BIT(19),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_npu_gpll0_div_clk_src",
+ .parent_hws = (const struct clk_hw *[]){
+ &gcc_npu_gpll0_clk_src.clkr.hw },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
static struct clk_branch gcc_npu_trig_clk = {
.halt_reg = 0x4d00c,
.halt_check = BRANCH_VOTED,
@@ -3375,12 +3443,16 @@ static struct clk_regmap *gcc_sm8150_clocks[] = {
[GCC_GP3_CLK] = &gcc_gp3_clk.clkr,
[GCC_GP3_CLK_SRC] = &gcc_gp3_clk_src.clkr,
[GCC_GPU_CFG_AHB_CLK] = &gcc_gpu_cfg_ahb_clk.clkr,
+ [GCC_GPU_GPLL0_CLK_SRC] = &gcc_gpu_gpll0_clk_src.clkr,
+ [GCC_GPU_GPLL0_DIV_CLK_SRC] = &gcc_gpu_gpll0_div_clk_src.clkr,
[GCC_GPU_IREF_CLK] = &gcc_gpu_iref_clk.clkr,
[GCC_GPU_MEMNOC_GFX_CLK] = &gcc_gpu_memnoc_gfx_clk.clkr,
[GCC_GPU_SNOC_DVM_GFX_CLK] = &gcc_gpu_snoc_dvm_gfx_clk.clkr,
[GCC_NPU_AT_CLK] = &gcc_npu_at_clk.clkr,
[GCC_NPU_AXI_CLK] = &gcc_npu_axi_clk.clkr,
[GCC_NPU_CFG_AHB_CLK] = &gcc_npu_cfg_ahb_clk.clkr,
+ [GCC_NPU_GPLL0_CLK_SRC] = &gcc_npu_gpll0_clk_src.clkr,
+ [GCC_NPU_GPLL0_DIV_CLK_SRC] = &gcc_npu_gpll0_div_clk_src.clkr,
[GCC_NPU_TRIG_CLK] = &gcc_npu_trig_clk.clkr,
[GCC_PCIE0_PHY_REFGEN_CLK] = &gcc_pcie0_phy_refgen_clk.clkr,
[GCC_PCIE1_PHY_REFGEN_CLK] = &gcc_pcie1_phy_refgen_clk.clkr,
--
2.25.1
next reply other threads:[~2020-04-24 4:43 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-04-24 4:43 Vinod Koul [this message]
2020-04-24 4:43 ` [PATCH 2/2] clk: qcom: gcc: Add missing UFS clocks for SM8150 Vinod Koul
2020-04-25 19:11 ` Stephen Boyd
2020-04-27 4:55 ` Vinod Koul
2020-05-13 1:25 ` Stephen Boyd
2020-05-13 5:51 ` Vinod Koul
2020-04-25 19:10 ` [PATCH 1/2] clk: qcom: gcc: Add GPU and NPU " Stephen Boyd
2020-04-27 4:41 ` Vinod Koul
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200424044311.2155917-1-vkoul@kernel.org \
--to=vkoul@kernel.org \
--cc=agross@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=jonathan@marek.ca \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=sboyd@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).