[PATCH v3 30/34] iommu/exynos: Use first SYSMMU in controllers list for IOMMU core

[Joerg Roedel <joro@8bytes.org>]

From: Joerg Roedel <jroedel@suse.de>

On Exynos platforms there can be more than one SYSMMU (IOMMU) for one
DMA master device. Since the IOMMU core code expects only one hardware
IOMMU, use the first SYSMMU in the list.

Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
---
 drivers/iommu/exynos-iommu.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/drivers/iommu/exynos-iommu.c b/drivers/iommu/exynos-iommu.c
index 186ff5cc975c..09cdd163560a 100644
--- a/drivers/iommu/exynos-iommu.c
+++ b/drivers/iommu/exynos-iommu.c
@@ -1261,6 +1261,11 @@ static int exynos_iommu_add_device(struct device *dev)
 	}
 	iommu_group_put(group);
 
+	/* There is always at least one entry, see exynos_iommu_of_xlate() */
+	data = list_first_entry(&owner->controllers,
+				struct sysmmu_drvdata, owner_node);
+	iommu_device_link(&data->iommu, dev);
+
 	return 0;
 }
 
@@ -1286,6 +1291,11 @@ static void exynos_iommu_remove_device(struct device *dev)
 
 	list_for_each_entry(data, &owner->controllers, owner_node)
 		device_link_del(data->link);
+
+	/* There is always at least one entry, see exynos_iommu_of_xlate() */
+	data = list_first_entry(&owner->controllers,
+				struct sysmmu_drvdata, owner_node);
+	iommu_device_unlink(&data->iommu, dev);
 }
 
 static int exynos_iommu_of_xlate(struct device *dev,
-- 
2.17.1