From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-6.9 required=3.0 tests=DKIMWL_WL_HIGH,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,HEADER_FROM_DIFFERENT_DOMAINS,INCLUDES_PATCH, MAILING_LIST_MULTI,SIGNED_OFF_BY,SPF_HELO_NONE,SPF_PASS,URIBL_BLOCKED autolearn=unavailable autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 5AADAC83006 for ; Wed, 29 Apr 2020 19:06:10 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 30193208FE for ; Wed, 29 Apr 2020 19:06:10 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (1024-bit key) header.d=chromium.org header.i=@chromium.org header.b="GGDHJj9b" Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1727085AbgD2TGG (ORCPT ); Wed, 29 Apr 2020 15:06:06 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:48458 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-FAIL-OK-FAIL) by vger.kernel.org with ESMTP id S1727078AbgD2TGF (ORCPT ); Wed, 29 Apr 2020 15:06:05 -0400 Received: from mail-pj1-x1044.google.com (mail-pj1-x1044.google.com [IPv6:2607:f8b0:4864:20::1044]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 86E76C035494 for ; Wed, 29 Apr 2020 12:06:05 -0700 (PDT) Received: by mail-pj1-x1044.google.com with SMTP id a32so1156061pje.5 for ; Wed, 29 Apr 2020 12:06:05 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=chromium.org; s=google; h=date:from:to:cc:subject:message-id:references:mime-version :content-disposition:in-reply-to; bh=0ej7eO6xezytl/ixLAF23HOWuLN9CZlAmr/HkPLdgmU=; b=GGDHJj9bgiNlGj+2ph+cSE5NfReadrZdt/F8ox7Z5acHW02wQJya+JvuraYIdP8xe7 QQibXfAGeQOsv3TW+mnN2pVCOeugdF4KSfc9mp+S8YlUR0i6BOVuG6eJMIBMlW8vPpos O6LjTutMiqi1dHkkSotRqCcYRAAef0DJj1PhU= X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:date:from:to:cc:subject:message-id:references :mime-version:content-disposition:in-reply-to; bh=0ej7eO6xezytl/ixLAF23HOWuLN9CZlAmr/HkPLdgmU=; b=PQ9BoqWNJQvNQDw3Fu5sa3mKgILX5VC9cVg6K5Qu7T7tY/mlYaIhYq/fHiE71+70+Y G/l4zCqha3yPkbHppzUMMbWdWhQOin7Ai2DaraJmT9llmHnDKiXv5fw10c5AxF9S8c7B Qh/y/aYnNJBDF6VjI6jEfhrkJwoffjtc+LftmXoDztZfzb2a7YDstFKVSnofGQpco3uG bdS0wdG3hlZgRx9aCzBN+4+HR89UXWt7RH231JSKMYHiTsoa0Vbp8tff8l0Gm1bPhpv6 nvNubkNwlVvI5rZLWisF7oKLeKqvkBOPid7+ii9L8An/2uzBDq1RuJwTNkbJWsRQyn7S n4Yg== X-Gm-Message-State: AGi0PuZPTQG3IVGLJt4UB7x/YN6CLi5BdzbT6vTE2Gfn+bbAnZ+PAmfr vJvKkny8JQZkc2NHaHF7zo5t6A== X-Google-Smtp-Source: APiQypLibexlLpc3KEYlgw0ToEgr1knuLpajMzcYRNfR79FYiu3XGFYHhXznbfajT9lgcwiEIX+Scg== X-Received: by 2002:a17:902:9a82:: with SMTP id w2mr35233468plp.117.1588187164736; Wed, 29 Apr 2020 12:06:04 -0700 (PDT) Received: from localhost ([2620:15c:202:1:4fff:7a6b:a335:8fde]) by smtp.gmail.com with ESMTPSA id i15sm1576108pgj.30.2020.04.29.12.06.03 (version=TLS1_3 cipher=TLS_AES_128_GCM_SHA256 bits=128/128); Wed, 29 Apr 2020 12:06:03 -0700 (PDT) Date: Wed, 29 Apr 2020 12:06:02 -0700 From: Matthias Kaehlcke To: Sandeep Maheswaram Cc: Andy Gross , Bjorn Andersson , Kishon Vijay Abraham I , Rob Herring , Mark Rutland , Stephen Boyd , Doug Anderson , linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org, devicetree@vger.kernel.org, Manu Gautam Subject: Re: [PATCH v6 1/4] dt-bindings: phy: qcom,qmp: Convert QMP PHY bindings to yaml Message-ID: <20200429190602.GU4525@google.com> References: <1588082775-19959-1-git-send-email-sanm@codeaurora.org> <1588082775-19959-2-git-send-email-sanm@codeaurora.org> MIME-Version: 1.0 Content-Type: text/plain; charset=utf-8 Content-Disposition: inline In-Reply-To: <1588082775-19959-2-git-send-email-sanm@codeaurora.org> Sender: linux-arm-msm-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-arm-msm@vger.kernel.org On Tue, Apr 28, 2020 at 07:36:12PM +0530, Sandeep Maheswaram wrote: > Convert QMP PHY bindings to DT schema format using json-schema. NACK (not sure if that carries any weight ;-) v6 of this patch removes the binding of USB3 DP PHY during the conversion, which is then added again as .yaml by "[2/4] dt-bindings: phy: qcom,qmp-usb3-dp: Add dt bindings for USB3 DP PHY" (https://patchwork.kernel.org/patch/11514767/). See my reply on that patch for what to do instead. > Signed-off-by: Sandeep Maheswaram > Reviewed-by: Rob Herring > --- > .../devicetree/bindings/phy/qcom,qmp-phy.yaml | 311 +++++++++++++++++++++ > .../devicetree/bindings/phy/qcom-qmp-phy.txt | 242 ---------------- > 2 files changed, 311 insertions(+), 242 deletions(-) > create mode 100644 Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml > delete mode 100644 Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt > > diff --git a/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml > new file mode 100644 > index 0000000..7da2be6 > --- /dev/null > +++ b/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml > @@ -0,0 +1,311 @@ > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) > + > +%YAML 1.2 > +--- > +$id: "http://devicetree.org/schemas/phy/qcom,qmp-phy.yaml#" > +$schema: "http://devicetree.org/meta-schemas/core.yaml#" > + > +title: Qualcomm QMP PHY controller > + > +maintainers: > + - Manu Gautam > + > +description: > + QMP phy controller supports physical layer functionality for a number of > + controllers on Qualcomm chipsets, such as, PCIe, UFS, and USB. > + > +properties: > + compatible: > + enum: > + - qcom,ipq8074-qmp-pcie-phy > + - qcom,msm8996-qmp-pcie-phy > + - qcom,msm8996-qmp-ufs-phy > + - qcom,msm8996-qmp-usb3-phy > + - qcom,msm8998-qmp-pcie-phy > + - qcom,msm8998-qmp-ufs-phy > + - qcom,msm8998-qmp-usb3-phy > + - qcom,sdm845-qhp-pcie-phy > + - qcom,sdm845-qmp-pcie-phy > + - qcom,sdm845-qmp-ufs-phy > + - qcom,sdm845-qmp-usb3-uni-phy > + - qcom,sm8150-qmp-ufs-phy > + > + reg: > + items: > + - description: Address and length of PHY's common serdes block. > + > + "#clock-cells": > + enum: [ 1, 2 ] > + > + "#address-cells": > + enum: [ 1, 2 ] > + > + "#size-cells": > + enum: [ 1, 2 ] > + > + clocks: > + minItems: 1 > + maxItems: 4 > + > + clock-names: > + minItems: 1 > + maxItems: 4 > + > + resets: > + minItems: 1 > + maxItems: 3 > + > + reset-names: > + minItems: 1 > + maxItems: 3 > + > + vdda-phy-supply: > + description: > + Phandle to a regulator supply to PHY core block. > + > + vdda-pll-supply: > + description: > + Phandle to 1.8V regulator supply to PHY refclk pll block. > + > + vddp-ref-clk-supply: > + description: > + Phandle to a regulator supply to any specific refclk > + pll block. > + > +#Required nodes: > +patternProperties: > + "^phy@[0-9a-f]+$": > + type: object > + description: > + Each device node of QMP phy is required to have as many child nodes as > + the number of lanes the PHY has. > + > +required: > + - compatible > + - reg > + - "#clock-cells" > + - "#address-cells" > + - "#size-cells" > + - clocks > + - clock-names > + - resets > + - reset-names > + - vdda-phy-supply > + - vdda-pll-supply > + > +additionalProperties: false > + > +allOf: > + - if: > + properties: > + compatible: > + contains: > + enum: > + - qcom,sdm845-qmp-usb3-uni-phy > + then: > + properties: > + clocks: > + items: > + - description: Phy aux clock. > + - description: Phy config clock. > + - description: 19.2 MHz ref clk. > + - description: Phy common block aux clock. > + clock-names: > + items: > + - const: aux > + - const: cfg_ahb > + - const: ref > + - const: com_aux > + resets: > + items: > + - description: reset of phy block. > + - description: phy common block reset. > + reset-names: > + items: > + - const: phy > + - const: common > + - if: > + properties: > + compatible: > + contains: > + enum: > + - qcom,msm8996-qmp-pcie-phy > + then: > + properties: > + clocks: > + items: > + - description: Phy aux clock. > + - description: Phy config clock. > + - description: 19.2 MHz ref clk. > + clock-names: > + items: > + - const: aux > + - const: cfg_ahb > + - const: ref > + resets: > + items: > + - description: reset of phy block. > + - description: phy common block reset. > + - description: phy's ahb cfg block reset. > + reset-names: > + items: > + - const: phy > + - const: common > + - const: cfg > + - if: > + properties: > + compatible: > + contains: > + enum: > + - qcom,msm8996-qmp-usb3-phy > + - qcom,msm8998-qmp-pcie-phy > + - qcom,msm8998-qmp-usb3-phy > + then: > + properties: > + clocks: > + items: > + - description: Phy aux clock. > + - description: Phy config clock. > + - description: 19.2 MHz ref clk. > + clock-names: > + items: > + - const: aux > + - const: cfg_ahb > + - const: ref > + resets: > + items: > + - description: reset of phy block. > + - description: phy common block reset. > + reset-names: > + items: > + - const: phy > + - const: common > + - if: > + properties: > + compatible: > + contains: > + enum: > + - qcom,msm8996-qmp-ufs-phy > + then: > + properties: > + clocks: > + items: > + - description: 19.2 MHz ref clk. > + clock-names: > + items: > + - const: ref > + resets: > + items: > + - description: PHY reset in the UFS controller. > + reset-names: > + items: > + - const: ufsphy > + - if: > + properties: > + compatible: > + contains: > + enum: > + - qcom,msm8998-qmp-ufs-phy > + - qcom,sdm845-qmp-ufs-phy > + - qcom,sm8150-qmp-ufs-phy > + then: > + properties: > + clocks: > + items: > + - description: 19.2 MHz ref clk. > + - description: Phy reference aux clock. > + clock-names: > + items: > + - const: ref > + - const: ref_aux > + resets: > + items: > + - description: PHY reset in the UFS controller. > + reset-names: > + items: > + - const: ufsphy > + - if: > + properties: > + compatible: > + contains: > + enum: > + - qcom,ipq8074-qmp-pcie-phy > + then: > + properties: > + clocks: > + items: > + - description: pipe clk. > + clock-names: > + items: > + - const: pipe_clk > + resets: > + items: > + - description: reset of phy block. > + - description: phy common block reset. > + reset-names: > + items: > + - const: phy > + - const: common > + - if: > + properties: > + compatible: > + contains: > + enum: > + - qcom,sdm845-qhp-pcie-phy > + - qcom,sdm845-qmp-pcie-phy > + then: > + properties: > + clocks: > + items: > + - description: Phy aux clock. > + - description: Phy config clock. > + - description: 19.2 MHz ref clk. > + - description: Phy refgen clk. > + clock-names: > + items: > + - const: aux > + - const: cfg_ahb > + - const: ref > + - const: refgen > + resets: > + items: > + - description: reset of phy block. > + reset-names: > + items: > + - const: phy > + > +examples: > + - | > + #include > + usb_2_qmpphy: phy-wrapper@88eb000 { > + compatible = "qcom,sdm845-qmp-usb3-uni-phy"; > + reg = <0 0x088eb000 0 0x18c>; > + #clock-cells = <1>; > + #address-cells = <2>; > + #size-cells = <2>; > + > + clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>, > + <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, > + <&gcc GCC_USB3_SEC_CLKREF_CLK>, > + <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>; > + clock-names = "aux", "cfg_ahb", "ref", "com_aux"; > + > + resets = <&gcc GCC_USB3PHY_PHY_SEC_BCR>, > + <&gcc GCC_USB3_PHY_SEC_BCR>; > + reset-names = "phy", "common"; > + > + vdda-phy-supply = <&vdda_usb2_ss_1p2>; > + vdda-pll-supply = <&vdda_usb2_ss_core>; > + > + usb_2_ssphy: phy@88eb200 { > + reg = <0 0x088eb200 0 0x128>, > + <0 0x088eb400 0 0x1fc>, > + <0 0x088eb800 0 0x218>, > + <0 0x088eb600 0 0x70>; > + #clock-cells = <0>; > + #phy-cells = <0>; > + clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>; > + clock-names = "pipe0"; > + clock-output-names = "usb3_uni_phy_pipe_clk_src"; > + }; > + }; > diff --git a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt > deleted file mode 100644 > index 54d6f8d..0000000 > --- a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt > +++ /dev/null > @@ -1,242 +0,0 @@ > -Qualcomm QMP PHY controller > -=========================== > - > -QMP phy controller supports physical layer functionality for a number of > -controllers on Qualcomm chipsets, such as, PCIe, UFS, and USB. > - > -Required properties: > - - compatible: compatible list, contains: > - "qcom,ipq8074-qmp-pcie-phy" for PCIe phy on IPQ8074 > - "qcom,msm8996-qmp-pcie-phy" for 14nm PCIe phy on msm8996, > - "qcom,msm8996-qmp-ufs-phy" for 14nm UFS phy on msm8996, > - "qcom,msm8996-qmp-usb3-phy" for 14nm USB3 phy on msm8996, > - "qcom,msm8998-qmp-usb3-phy" for USB3 QMP V3 phy on msm8998, > - "qcom,msm8998-qmp-ufs-phy" for UFS QMP phy on msm8998, > - "qcom,msm8998-qmp-pcie-phy" for PCIe QMP phy on msm8998, > - "qcom,sdm845-qhp-pcie-phy" for QHP PCIe phy on sdm845, > - "qcom,sdm845-qmp-pcie-phy" for QMP PCIe phy on sdm845, > - "qcom,sdm845-qmp-usb3-phy" for USB3 QMP V3 phy on sdm845, > - "qcom,sdm845-qmp-usb3-uni-phy" for USB3 QMP V3 UNI phy on sdm845, > - "qcom,sdm845-qmp-ufs-phy" for UFS QMP phy on sdm845, > - "qcom,sm8150-qmp-ufs-phy" for UFS QMP phy on sm8150. > - > -- reg: > - - index 0: address and length of register set for PHY's common > - serdes block. > - - index 1: address and length of the DP_COM control block (for > - "qcom,sdm845-qmp-usb3-phy" only). > - > -- reg-names: > - - For "qcom,sdm845-qmp-usb3-phy": > - - Should be: "reg-base", "dp_com" > - - For all others: > - - The reg-names property shouldn't be defined. > - > - - #address-cells: must be 1 > - - #size-cells: must be 1 > - - ranges: must be present > - > - - clocks: a list of phandles and clock-specifier pairs, > - one for each entry in clock-names. > - - clock-names: "cfg_ahb" for phy config clock, > - "aux" for phy aux clock, > - "ref" for 19.2 MHz ref clk, > - "com_aux" for phy common block aux clock, > - "ref_aux" for phy reference aux clock, > - > - For "qcom,ipq8074-qmp-pcie-phy": no clocks are listed. > - For "qcom,msm8996-qmp-pcie-phy" must contain: > - "aux", "cfg_ahb", "ref". > - For "qcom,msm8996-qmp-ufs-phy" must contain: > - "ref". > - For "qcom,msm8996-qmp-usb3-phy" must contain: > - "aux", "cfg_ahb", "ref". > - For "qcom,msm8998-qmp-usb3-phy" must contain: > - "aux", "cfg_ahb", "ref". > - For "qcom,msm8998-qmp-ufs-phy" must contain: > - "ref", "ref_aux". > - For "qcom,msm8998-qmp-pcie-phy" must contain: > - "aux", "cfg_ahb", "ref". > - For "qcom,sdm845-qhp-pcie-phy" must contain: > - "aux", "cfg_ahb", "ref", "refgen". > - For "qcom,sdm845-qmp-pcie-phy" must contain: > - "aux", "cfg_ahb", "ref", "refgen". > - For "qcom,sdm845-qmp-usb3-phy" must contain: > - "aux", "cfg_ahb", "ref", "com_aux". > - For "qcom,sdm845-qmp-usb3-uni-phy" must contain: > - "aux", "cfg_ahb", "ref", "com_aux". > - For "qcom,sdm845-qmp-ufs-phy" must contain: > - "ref", "ref_aux". > - For "qcom,sm8150-qmp-ufs-phy" must contain: > - "ref", "ref_aux". > - > - - resets: a list of phandles and reset controller specifier pairs, > - one for each entry in reset-names. > - - reset-names: "phy" for reset of phy block, > - "common" for phy common block reset, > - "cfg" for phy's ahb cfg block reset, > - "ufsphy" for the PHY reset in the UFS controller. > - > - For "qcom,ipq8074-qmp-pcie-phy" must contain: > - "phy", "common". > - For "qcom,msm8996-qmp-pcie-phy" must contain: > - "phy", "common", "cfg". > - For "qcom,msm8996-qmp-ufs-phy": must contain: > - "ufsphy". > - For "qcom,msm8996-qmp-usb3-phy" must contain > - "phy", "common". > - For "qcom,msm8998-qmp-usb3-phy" must contain > - "phy", "common". > - For "qcom,msm8998-qmp-ufs-phy": must contain: > - "ufsphy". > - For "qcom,msm8998-qmp-pcie-phy" must contain: > - "phy", "common". > - For "qcom,sdm845-qhp-pcie-phy" must contain: > - "phy". > - For "qcom,sdm845-qmp-pcie-phy" must contain: > - "phy". > - For "qcom,sdm845-qmp-usb3-phy" must contain: > - "phy", "common". > - For "qcom,sdm845-qmp-usb3-uni-phy" must contain: > - "phy", "common". > - For "qcom,sdm845-qmp-ufs-phy": must contain: > - "ufsphy". > - For "qcom,sm8150-qmp-ufs-phy": must contain: > - "ufsphy". > - > - - vdda-phy-supply: Phandle to a regulator supply to PHY core block. > - - vdda-pll-supply: Phandle to 1.8V regulator supply to PHY refclk pll block. > - > -Optional properties: > - - vddp-ref-clk-supply: Phandle to a regulator supply to any specific refclk > - pll block. > - > -Required nodes: > - - Each device node of QMP phy is required to have as many child nodes as > - the number of lanes the PHY has. > - > -Required properties for child nodes of PCIe PHYs (one child per lane): > - - reg: list of offset and length pairs of register sets for PHY blocks - > - tx, rx, pcs, and pcs_misc (optional). > - - #phy-cells: must be 0 > - > -Required properties for a single "lanes" child node of non-PCIe PHYs: > - - reg: list of offset and length pairs of register sets for PHY blocks > - For 1-lane devices: > - tx, rx, pcs, and (optionally) pcs_misc > - For 2-lane devices: > - tx0, rx0, pcs, tx1, rx1, and (optionally) pcs_misc > - - #phy-cells: must be 0 > - > -Required properties for child node of PCIe and USB3 qmp phys: > - - clocks: a list of phandles and clock-specifier pairs, > - one for each entry in clock-names. > - - clock-names: Must contain following: > - "pipe" for pipe clock specific to each lane. > - - clock-output-names: Name of the PHY clock that will be the parent for > - the above pipe clock. > - For "qcom,ipq8074-qmp-pcie-phy": > - - "pcie20_phy0_pipe_clk" Pipe Clock parent > - (or) > - "pcie20_phy1_pipe_clk" > - - #clock-cells: must be 0 > - - Phy pll outputs pipe clocks for pipe based PHYs. These clocks are then > - gate-controlled by the gcc. > - > -Required properties for child node of PHYs with lane reset, AKA: > - "qcom,msm8996-qmp-pcie-phy" > - - resets: a list of phandles and reset controller specifier pairs, > - one for each entry in reset-names. > - - reset-names: Must contain following: > - "lane" for reset specific to each lane. > - > -Example: > - phy@34000 { > - compatible = "qcom,msm8996-qmp-pcie-phy"; > - reg = <0x34000 0x488>; > - #address-cells = <1>; > - #size-cells = <1>; > - ranges; > - > - clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>, > - <&gcc GCC_PCIE_PHY_CFG_AHB_CLK>, > - <&gcc GCC_PCIE_CLKREF_CLK>; > - clock-names = "aux", "cfg_ahb", "ref"; > - > - vdda-phy-supply = <&pm8994_l28>; > - vdda-pll-supply = <&pm8994_l12>; > - > - resets = <&gcc GCC_PCIE_PHY_BCR>, > - <&gcc GCC_PCIE_PHY_COM_BCR>, > - <&gcc GCC_PCIE_PHY_COM_NOCSR_BCR>; > - reset-names = "phy", "common", "cfg"; > - > - pciephy_0: lane@35000 { > - reg = <0x35000 0x130>, > - <0x35200 0x200>, > - <0x35400 0x1dc>; > - #clock-cells = <0>; > - #phy-cells = <0>; > - > - clocks = <&gcc GCC_PCIE_0_PIPE_CLK>; > - clock-names = "pipe0"; > - clock-output-names = "pcie_0_pipe_clk_src"; > - resets = <&gcc GCC_PCIE_0_PHY_BCR>; > - reset-names = "lane0"; > - }; > - > - pciephy_1: lane@36000 { > - ... > - ... > - }; > - > - phy@88eb000 { > - compatible = "qcom,sdm845-qmp-usb3-uni-phy"; > - reg = <0x88eb000 0x18c>; > - #address-cells = <1>; > - #size-cells = <1>; > - ranges; > - > - clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>, > - <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, > - <&gcc GCC_USB3_SEC_CLKREF_CLK>, > - <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>; > - clock-names = "aux", "cfg_ahb", "ref", "com_aux"; > - > - resets = <&gcc GCC_USB3PHY_PHY_SEC_BCR>, > - <&gcc GCC_USB3_PHY_SEC_BCR>; > - reset-names = "phy", "common"; > - > - lane@88eb200 { > - reg = <0x88eb200 0x128>, > - <0x88eb400 0x1fc>, > - <0x88eb800 0x218>, > - <0x88eb600 0x70>; > - #clock-cells = <0>; > - #phy-cells = <0>; > - clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>; > - clock-names = "pipe0"; > - clock-output-names = "usb3_uni_phy_pipe_clk_src"; > - }; > - }; > - > - phy@1d87000 { > - compatible = "qcom,sdm845-qmp-ufs-phy"; > - reg = <0x1d87000 0x18c>; > - #address-cells = <1>; > - #size-cells = <1>; > - ranges; > - clock-names = "ref", > - "ref_aux"; > - clocks = <&gcc GCC_UFS_MEM_CLKREF_CLK>, > - <&gcc GCC_UFS_PHY_PHY_AUX_CLK>; > - > - lanes@1d87400 { > - reg = <0x1d87400 0x108>, > - <0x1d87600 0x1e0>, > - <0x1d87c00 0x1dc>, > - <0x1d87800 0x108>, > - <0x1d87a00 0x1e0>; > - #phy-cells = <0>; > - }; > - }; > -- > QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member > of Code Aurora Forum, hosted by The Linux Foundation >