* [PATCH] arm64: dts: qcom: sc7180: Move mss node to the right place
@ 2020-05-21 1:03 Stephen Boyd
2020-05-21 3:37 ` Sibi Sankar
2020-05-21 16:19 ` Evan Green
0 siblings, 2 replies; 3+ messages in thread
From: Stephen Boyd @ 2020-05-21 1:03 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson
Cc: linux-kernel, linux-arm-msm, Evan Green, Sibi Sankar
The modem node has an address of 4080000 and thus should come after tlmm
and before gpu. Move the node to the right place to maintainer proper
address sort order.
Cc: Evan Green <evgreen@chromium.org>
Cc: Sibi Sankar <sibis@codeaurora.org>
Fixes: e14a15eba89a ("arm64: dts: qcom: sc7180: Add Q6V5 MSS node")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
---
arch/arm64/boot/dts/qcom/sc7180.dtsi | 102 +++++++++++++--------------
1 file changed, 51 insertions(+), 51 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index 6b12c60c37fb..1027ef70f8db 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -1459,6 +1459,57 @@ pinconf-sd-cd {
};
};
+ remoteproc_mpss: remoteproc@4080000 {
+ compatible = "qcom,sc7180-mpss-pas";
+ reg = <0 0x04080000 0 0x4040>, <0 0x04180000 0 0x48>;
+ reg-names = "qdsp6", "rmb";
+
+ interrupts-extended = <&intc GIC_SPI 266 IRQ_TYPE_EDGE_RISING>,
+ <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
+ <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog", "fatal", "ready", "handover",
+ "stop-ack", "shutdown-ack";
+
+ clocks = <&gcc GCC_MSS_CFG_AHB_CLK>,
+ <&gcc GCC_MSS_Q6_MEMNOC_AXI_CLK>,
+ <&gcc GCC_MSS_NAV_AXI_CLK>,
+ <&gcc GCC_MSS_SNOC_AXI_CLK>,
+ <&gcc GCC_MSS_MFAB_AXIS_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "iface", "bus", "nav", "snoc_axi",
+ "mnoc_axi", "xo";
+
+ power-domains = <&aoss_qmp AOSS_QMP_LS_MODEM>,
+ <&rpmhpd SC7180_CX>,
+ <&rpmhpd SC7180_MX>,
+ <&rpmhpd SC7180_MSS>;
+ power-domain-names = "load_state", "cx", "mx", "mss";
+
+ memory-region = <&mpss_mem>;
+
+ qcom,smem-states = <&modem_smp2p_out 0>;
+ qcom,smem-state-names = "stop";
+
+ resets = <&aoss_reset AOSS_CC_MSS_RESTART>,
+ <&pdc_reset PDC_MODEM_SYNC_RESET>;
+ reset-names = "mss_restart", "pdc_reset";
+
+ qcom,halt-regs = <&tcsr_mutex_regs 0x23000 0x25000 0x24000>;
+ qcom,spare-regs = <&tcsr_regs 0xb3e4>;
+
+ status = "disabled";
+
+ glink-edge {
+ interrupts = <GIC_SPI 449 IRQ_TYPE_EDGE_RISING>;
+ label = "modem";
+ qcom,remote-pid = <1>;
+ mboxes = <&apss_shared 12>;
+ };
+ };
+
gpu: gpu@5000000 {
compatible = "qcom,adreno-618.0", "qcom,adreno";
#stream-id-cells = <16>;
@@ -2054,57 +2105,6 @@ apss_merge_funnel_in: endpoint {
};
};
- remoteproc_mpss: remoteproc@4080000 {
- compatible = "qcom,sc7180-mpss-pas";
- reg = <0 0x04080000 0 0x4040>, <0 0x04180000 0 0x48>;
- reg-names = "qdsp6", "rmb";
-
- interrupts-extended = <&intc GIC_SPI 266 IRQ_TYPE_EDGE_RISING>,
- <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
- <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
- <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
- <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
- <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
- interrupt-names = "wdog", "fatal", "ready", "handover",
- "stop-ack", "shutdown-ack";
-
- clocks = <&gcc GCC_MSS_CFG_AHB_CLK>,
- <&gcc GCC_MSS_Q6_MEMNOC_AXI_CLK>,
- <&gcc GCC_MSS_NAV_AXI_CLK>,
- <&gcc GCC_MSS_SNOC_AXI_CLK>,
- <&gcc GCC_MSS_MFAB_AXIS_CLK>,
- <&rpmhcc RPMH_CXO_CLK>;
- clock-names = "iface", "bus", "nav", "snoc_axi",
- "mnoc_axi", "xo";
-
- power-domains = <&aoss_qmp AOSS_QMP_LS_MODEM>,
- <&rpmhpd SC7180_CX>,
- <&rpmhpd SC7180_MX>,
- <&rpmhpd SC7180_MSS>;
- power-domain-names = "load_state", "cx", "mx", "mss";
-
- memory-region = <&mpss_mem>;
-
- qcom,smem-states = <&modem_smp2p_out 0>;
- qcom,smem-state-names = "stop";
-
- resets = <&aoss_reset AOSS_CC_MSS_RESTART>,
- <&pdc_reset PDC_MODEM_SYNC_RESET>;
- reset-names = "mss_restart", "pdc_reset";
-
- qcom,halt-regs = <&tcsr_mutex_regs 0x23000 0x25000 0x24000>;
- qcom,spare-regs = <&tcsr_regs 0xb3e4>;
-
- status = "disabled";
-
- glink-edge {
- interrupts = <GIC_SPI 449 IRQ_TYPE_EDGE_RISING>;
- label = "modem";
- qcom,remote-pid = <1>;
- mboxes = <&apss_shared 12>;
- };
- };
-
sdhc_2: sdhci@8804000 {
compatible = "qcom,sc7180-sdhci", "qcom,sdhci-msm-v5";
reg = <0 0x08804000 0 0x1000>;
base-commit: d82fade846aa8bb34956120e3792f494058ec35e
--
Sent by a computer, using git, on the internet
^ permalink raw reply related [flat|nested] 3+ messages in thread* Re: [PATCH] arm64: dts: qcom: sc7180: Move mss node to the right place
2020-05-21 1:03 [PATCH] arm64: dts: qcom: sc7180: Move mss node to the right place Stephen Boyd
@ 2020-05-21 3:37 ` Sibi Sankar
2020-05-21 16:19 ` Evan Green
1 sibling, 0 replies; 3+ messages in thread
From: Sibi Sankar @ 2020-05-21 3:37 UTC (permalink / raw)
To: Stephen Boyd
Cc: Andy Gross, Bjorn Andersson, linux-kernel, linux-arm-msm,
Evan Green, linux-kernel-owner
On 2020-05-21 06:33, Stephen Boyd wrote:
> The modem node has an address of 4080000 and thus should come after
> tlmm
> and before gpu. Move the node to the right place to maintainer proper
> address sort order.
>
> Cc: Evan Green <evgreen@chromium.org>
> Cc: Sibi Sankar <sibis@codeaurora.org>
> Fixes: e14a15eba89a ("arm64: dts: qcom: sc7180: Add Q6V5 MSS node")
> Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Sibi Sankar <sibis@codeaurora.org>
> ---
> arch/arm64/boot/dts/qcom/sc7180.dtsi | 102 +++++++++++++--------------
> 1 file changed, 51 insertions(+), 51 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi
> b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> index 6b12c60c37fb..1027ef70f8db 100644
> --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> @@ -1459,6 +1459,57 @@ pinconf-sd-cd {
> };
> };
>
> + remoteproc_mpss: remoteproc@4080000 {
> + compatible = "qcom,sc7180-mpss-pas";
> + reg = <0 0x04080000 0 0x4040>, <0 0x04180000 0 0x48>;
> + reg-names = "qdsp6", "rmb";
> +
> + interrupts-extended = <&intc GIC_SPI 266 IRQ_TYPE_EDGE_RISING>,
> + <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
> + <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
> + <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
> + <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
> + <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
> + interrupt-names = "wdog", "fatal", "ready", "handover",
> + "stop-ack", "shutdown-ack";
> +
> + clocks = <&gcc GCC_MSS_CFG_AHB_CLK>,
> + <&gcc GCC_MSS_Q6_MEMNOC_AXI_CLK>,
> + <&gcc GCC_MSS_NAV_AXI_CLK>,
> + <&gcc GCC_MSS_SNOC_AXI_CLK>,
> + <&gcc GCC_MSS_MFAB_AXIS_CLK>,
> + <&rpmhcc RPMH_CXO_CLK>;
> + clock-names = "iface", "bus", "nav", "snoc_axi",
> + "mnoc_axi", "xo";
> +
> + power-domains = <&aoss_qmp AOSS_QMP_LS_MODEM>,
> + <&rpmhpd SC7180_CX>,
> + <&rpmhpd SC7180_MX>,
> + <&rpmhpd SC7180_MSS>;
> + power-domain-names = "load_state", "cx", "mx", "mss";
> +
> + memory-region = <&mpss_mem>;
> +
> + qcom,smem-states = <&modem_smp2p_out 0>;
> + qcom,smem-state-names = "stop";
> +
> + resets = <&aoss_reset AOSS_CC_MSS_RESTART>,
> + <&pdc_reset PDC_MODEM_SYNC_RESET>;
> + reset-names = "mss_restart", "pdc_reset";
> +
> + qcom,halt-regs = <&tcsr_mutex_regs 0x23000 0x25000 0x24000>;
> + qcom,spare-regs = <&tcsr_regs 0xb3e4>;
> +
> + status = "disabled";
> +
> + glink-edge {
> + interrupts = <GIC_SPI 449 IRQ_TYPE_EDGE_RISING>;
> + label = "modem";
> + qcom,remote-pid = <1>;
> + mboxes = <&apss_shared 12>;
> + };
> + };
> +
> gpu: gpu@5000000 {
> compatible = "qcom,adreno-618.0", "qcom,adreno";
> #stream-id-cells = <16>;
> @@ -2054,57 +2105,6 @@ apss_merge_funnel_in: endpoint {
> };
> };
>
> - remoteproc_mpss: remoteproc@4080000 {
> - compatible = "qcom,sc7180-mpss-pas";
> - reg = <0 0x04080000 0 0x4040>, <0 0x04180000 0 0x48>;
> - reg-names = "qdsp6", "rmb";
> -
> - interrupts-extended = <&intc GIC_SPI 266 IRQ_TYPE_EDGE_RISING>,
> - <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
> - <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
> - <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
> - <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
> - <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
> - interrupt-names = "wdog", "fatal", "ready", "handover",
> - "stop-ack", "shutdown-ack";
> -
> - clocks = <&gcc GCC_MSS_CFG_AHB_CLK>,
> - <&gcc GCC_MSS_Q6_MEMNOC_AXI_CLK>,
> - <&gcc GCC_MSS_NAV_AXI_CLK>,
> - <&gcc GCC_MSS_SNOC_AXI_CLK>,
> - <&gcc GCC_MSS_MFAB_AXIS_CLK>,
> - <&rpmhcc RPMH_CXO_CLK>;
> - clock-names = "iface", "bus", "nav", "snoc_axi",
> - "mnoc_axi", "xo";
> -
> - power-domains = <&aoss_qmp AOSS_QMP_LS_MODEM>,
> - <&rpmhpd SC7180_CX>,
> - <&rpmhpd SC7180_MX>,
> - <&rpmhpd SC7180_MSS>;
> - power-domain-names = "load_state", "cx", "mx", "mss";
> -
> - memory-region = <&mpss_mem>;
> -
> - qcom,smem-states = <&modem_smp2p_out 0>;
> - qcom,smem-state-names = "stop";
> -
> - resets = <&aoss_reset AOSS_CC_MSS_RESTART>,
> - <&pdc_reset PDC_MODEM_SYNC_RESET>;
> - reset-names = "mss_restart", "pdc_reset";
> -
> - qcom,halt-regs = <&tcsr_mutex_regs 0x23000 0x25000 0x24000>;
> - qcom,spare-regs = <&tcsr_regs 0xb3e4>;
> -
> - status = "disabled";
> -
> - glink-edge {
> - interrupts = <GIC_SPI 449 IRQ_TYPE_EDGE_RISING>;
> - label = "modem";
> - qcom,remote-pid = <1>;
> - mboxes = <&apss_shared 12>;
> - };
> - };
> -
> sdhc_2: sdhci@8804000 {
> compatible = "qcom,sc7180-sdhci", "qcom,sdhci-msm-v5";
> reg = <0 0x08804000 0 0x1000>;
>
> base-commit: d82fade846aa8bb34956120e3792f494058ec35e
--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project.
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: [PATCH] arm64: dts: qcom: sc7180: Move mss node to the right place
2020-05-21 1:03 [PATCH] arm64: dts: qcom: sc7180: Move mss node to the right place Stephen Boyd
2020-05-21 3:37 ` Sibi Sankar
@ 2020-05-21 16:19 ` Evan Green
1 sibling, 0 replies; 3+ messages in thread
From: Evan Green @ 2020-05-21 16:19 UTC (permalink / raw)
To: Stephen Boyd
Cc: Andy Gross, Bjorn Andersson, LKML, linux-arm-msm, Sibi Sankar
On Wed, May 20, 2020 at 6:03 PM Stephen Boyd <swboyd@chromium.org> wrote:
>
> The modem node has an address of 4080000 and thus should come after tlmm
> and before gpu. Move the node to the right place to maintainer proper
> address sort order.
>
> Cc: Evan Green <evgreen@chromium.org>
> Cc: Sibi Sankar <sibis@codeaurora.org>
> Fixes: e14a15eba89a ("arm64: dts: qcom: sc7180: Add Q6V5 MSS node")
> Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Thanks for the cleanup.
Reviewed-by: Evan Green <evgreen@chromium.org>
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2020-05-21 16:19 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-05-21 1:03 [PATCH] arm64: dts: qcom: sc7180: Move mss node to the right place Stephen Boyd
2020-05-21 3:37 ` Sibi Sankar
2020-05-21 16:19 ` Evan Green
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).